scholarly journals Laser-Driven Programmable Metal Transfer in GMAW

2020 ◽  
Vol 99 (3) ◽  
pp. 93s-100s
Author(s):  
SHUJUN CHEN ◽  
◽  
YAZHOU JIA ◽  
WENHAO HUANG ◽  
JUN XIAO
Keyword(s):  
Laser Pulse ◽  
Real Time ◽  
Peak Power ◽  
Control Strategies ◽  
Welding Current ◽  
Laser Pulses ◽  
Metal Transfer ◽  
Power Matching ◽  
Recoil Force ◽  
Droplet Trajectory

Conventional pulsed laser-enhanced gas metal arc weld-ing (GMAW) employs a single fiber laser focused and aimed on the droplet neck position to produce a laser recoil force and thus ensure the droplet detachment despite the am-perage of the welding current. One drop per laser pulse metal transfer is obtained, and the droplet deflects away from the wire axis along the laser incident direction. This implies that the droplet trajectory may also be controlled if the direction of the laser recoil force can be adjusted. Such a controllability is expected to bring an entirely new capa-bility to the GMAW process: active control on the weld beam geometry. To this end, double-sided, laser-enhanced GMAW was proposed and experimentally verified in this pa-per. The two lasers were symmetrically positioned, and both aimed at the droplet neck. The laser pulse peak power, du-ration, and pulse phase of the two lasers can all be programmed to regulate the laser recoil forces. The metal transfer under twin laser irradiations (same laser pulses and phases) was first verified. Then the effectiveness on controlling the droplet trajectory of three proposed control strategies — peak power matching, peak width matching, and phase matching of the two lasers — were evaluated. The results showed laser peak power matching is optimal for obtaining desired droplet trajectory. Since the laser can be easily controlled in real time, the transfer frequency, droplet size, and trajectory can all be adjusted in real time, and the metal transfer evolves into programmable transfer.

scholarly journals Modulated High Power and Narrow Pulse Width Laser Drive Circuit for Lidar System

Electronics ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 823
Author(s):  
Zhiwen Chen ◽  
Yingying Yan ◽  
Jun Shu ◽  
Kefu Liu ◽  
Jian Qiu
Keyword(s):  
Laser Pulse ◽  
Pulse Width ◽  
Peak Power ◽  
Laser Pulses ◽  
Input Voltage ◽  
Modulation Method ◽  
Lidar System ◽  
Switching Speed ◽  
Parasitic Parameters ◽  
Drive Circuit

This manuscript introduces a laser drive circuit for a light detection and ranging (Lidar) system. A Lidar system usually requires its drive circuit to provide laser pulses with nanosecond pulse width, >100 W peak power and high repetition frequency. However, the existing research results show difficulties in meeting these requirements. In order to reduce the pulse width and increase the peak power of laser pulses, special circuit design and component selection are used to optimize the parasitic parameters of the drive circuit, and GaN devices are used to increase the switching speed. The characteristics of laser pulses are tested under different input voltage, pulse per second and switch conducting time. Meanwhile, the reasons for the changes in these characteristics are analyzed and explained. In order to meet the requirements of the Lidar system to detect targets at different distances, a modulation method to change the peak power of the laser pulse is proposed. In our experiment, ideally, the peak power of the laser pulse reaches 135 W, and the pulse width is less than 2 ns at a pulse per second rate of 400 kHz.

Pollution based real time control strategies for combined sewer systems

1997 ◽  
Vol 36 (8-9) ◽  
pp. 331-336 ◽  
Author(s):  
Gabriela Weinreich ◽  
Wolfgang Schilling ◽  
Ane Birkely ◽  
Tallak Moland
Keyword(s):  
Real Time ◽  
Control Strategies ◽  
Ammonia Nitrogen ◽  
Simple Extension ◽  
Real Time Control ◽  
Time Control ◽  
Sewer Systems ◽  
Receiving Waters ◽  
Tunnel System

This paper presents results from an application of a newly developed simulation tool for pollution based real time control (PBRTC) of urban drainage systems. The Oslo interceptor tunnel is used as a case study. The paper focuses on the reduction of total phosphorus Ptot and ammonia-nitrogen NH4-N overflow loads into the receiving waters by means of optimized operation of the tunnel system. With PBRTC the total reduction of the Ptot load is 48% and of the NH4-N load 51%. Compared to the volume based RTC scenario the reductions are 11% and 15%, respectively. These further reductions could be achieved with a relatively simple extension of the operation strategy.

Peak-Power-Aware Energy Management for Periodic Real-Time Applications

2020 ◽  
Vol 39 (4) ◽  
pp. 779-788 ◽  
Author(s):  
Mohsen Ansari ◽  
Amir Yeganeh-Khaksar ◽  
Sepideh Safari ◽  
Alireza Ejlali
Keyword(s):  
Real Time ◽  
Energy Management ◽  
Peak Power ◽  
Real Time Applications

scholarly journals Power Hardware-in-the-Loop-Based Performance Analysis of Different Converter Controllers for Fast Active Power Regulation in Low-Inertia Power Systems

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3274
Author(s):  
Jose Rueda Torres ◽  
Zameer Ahmad ◽  
Nidarshan Veera Kumar ◽  
Elyas Rakhshani ◽  
Ebrahim Adabi ◽  
...  
Keyword(s):  
Performance Evaluation ◽  
Power Systems ◽  
Real Time ◽  
Control Strategies ◽  
Active Power ◽  
Power Electronic ◽  
Hardware In The Loop ◽  
Digital Controllers ◽  
Power Regulation ◽  
The Impact

Future electrical power systems will be dominated by power electronic converters, which are deployed for the integration of renewable power plants, responsive demand, and different types of storage systems. The stability of such systems will strongly depend on the control strategies attached to the converters. In this context, laboratory-scale setups are becoming the key tools for prototyping and evaluating the performance and robustness of different converter technologies and control strategies. The performance evaluation of control strategies for dynamic frequency support using fast active power regulation (FAPR) requires the urgent development of a suitable power hardware-in-the-loop (PHIL) setup. In this paper, the most prominent emerging types of FAPR are selected and studied: droop-based FAPR, droop derivative-based FAPR, and virtual synchronous power (VSP)-based FAPR. A novel setup for PHIL-based performance evaluation of these strategies is proposed. The setup combines the advanced modeling and simulation functions of a real-time digital simulation platform (RTDS), an external programmable unit to implement the studied FAPR control strategies as digital controllers, and actual hardware. The hardware setup consists of a grid emulator to recreate the dynamic response as seen from the interface bus of the grid side converter of a power electronic-interfaced device (e.g., type-IV wind turbines), and a mockup voltage source converter (VSC, i.e., a device under test (DUT)). The DUT is virtually interfaced to one high-voltage bus of the electromagnetic transient (EMT) representation of a variant of the IEEE 9 bus test system, which has been modified to consider an operating condition with 52% of the total supply provided by wind power generation. The selected and programmed FAPR strategies are applied to the DUT, with the ultimate goal of ascertaining its feasibility and effectiveness with respect to the pure software-based EMT representation performed in real time. Particularly, the time-varying response of the active power injection by each FAPR control strategy and the impact on the instantaneous frequency excursions occurring in the frequency containment periods are analyzed. The performed tests show the degree of improvements on both the rate-of-change-of-frequency (RoCoF) and the maximum frequency excursion (e.g., nadir).

scholarly journals Production of ion beams in high-power laser–plasma interactions and their applications

2004 ◽  
Vol 22 (1) ◽  
pp. 19-24 ◽  
Author(s):  
F. PEGORARO ◽  
S. ATZENI ◽  
M. BORGHESI ◽  
S. BULANOV ◽  
T. ESIRKEPOV ◽  
...  
Keyword(s):  
Laser Pulse ◽  
Medical Physics ◽  
Ion Beam ◽  
Laser Pulses ◽  
Ion Beams ◽  
Laser Plasma Interactions ◽  
Physical Mechanisms ◽  
Short Laser Pulses ◽  
Laser Pulse Intensity ◽  
Target Design

Energetic ion beams are produced during the interaction of ultrahigh-intensity, short laser pulses with plasmas. These laser-produced ion beams have important applications ranging from the fast ignition of thermonuclear targets to proton imaging, deep proton lithography, medical physics, and injectors for conventional accelerators. Although the basic physical mechanisms of ion beam generation in the plasma produced by the laser pulse interaction with the target are common to all these applications, each application requires a specific optimization of the ion beam properties, that is, an appropriate choice of the target design and of the laser pulse intensity, shape, and duration.

scholarly journals Power Hardware-in-the-Loop: Response of Power Components in Real-Time Grid Simulation Environment

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 593
Author(s):  
Moiz Muhammad ◽  
Holger Behrends ◽  
Stefan Geißendörfer ◽  
Karsten von Maydell ◽  
Carsten Agert
Keyword(s):  
Real Time ◽  
Power Distribution ◽  
Control Strategies ◽  
Power Grid ◽  
Energy System ◽  
Hardware In The Loop ◽  
Distribution Grid ◽  
Compensation Strategy ◽  
Software Environment ◽  
The Real

With increasing changes in the contemporary energy system, it becomes essential to test the autonomous control strategies for distributed energy resources in a controlled environment to investigate power grid stability. Power hardware-in-the-loop (PHIL) concept is an efficient approach for such evaluations in which a virtually simulated power grid is interfaced to a real hardware device. This strongly coupled software-hardware system introduces obstacles that need attention for smooth operation of the laboratory setup to validate robust control algorithms for decentralized grids. This paper presents a novel methodology and its implementation to develop a test-bench for a real-time PHIL simulation of a typical power distribution grid to study the dynamic behavior of the real power components in connection with the simulated grid. The application of hybrid simulation in a single software environment is realized to model the power grid which obviates the need to simulate the complete grid with a lower discretized sample-time. As an outcome, an environment is established interconnecting the virtual model to the real-world devices. The inaccuracies linked to the power components are examined at length and consequently a suitable compensation strategy is devised to improve the performance of the hardware under test (HUT). Finally, the compensation strategy is also validated through a simulation scenario.

scholarly journals Electron Symmetry Breaking during Attosecond Charge Migration Induced by Laser Pulses: Point Group Analyses for Quantum Dynamics

Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 205
Author(s):  
Dietrich Haase ◽  
Gunter Hermann ◽  
Jörn Manz ◽  
Vincent Pohl ◽  
Jean Christophe Tremblay
Keyword(s):  
Laser Pulse ◽  
Symmetry Breaking ◽  
Electric Fields ◽  
Quantum Dynamics ◽  
Point Group ◽  
Laser Pulses ◽  
Charge Migration ◽  
Laser Control ◽  
The One ◽  
Superposition States

Quantum simulations of the electron dynamics of oriented benzene and Mg-porphyrin driven by short (<10 fs) laser pulses yield electron symmetry breaking during attosecond charge migration. Nuclear motions are negligible on this time domain, i.e., the point group symmetries G = D6h and D4h of the nuclear scaffolds are conserved. At the same time, the symmetries of the one-electron densities are broken, however, to specific subgroups of G for the excited superposition states. These subgroups depend on the polarization and on the electric fields of the laser pulses. They can be determined either by inspection of the symmetry elements of the one-electron density which represents charge migration after the laser pulse, or by a new and more efficient group-theoretical approach. The results agree perfectly with each other. They suggest laser control of symmetry breaking. The choice of the target subgroup is restricted, however, by a new theorem, i.e., it must contain the symmetry group of the time-dependent electronic Hamiltonian of the oriented molecule interacting with the laser pulse(s). This theorem can also be applied to confirm or to falsify complementary suggestions of electron symmetry breaking by laser pulses.

scholarly journals Cylindrically and non-cylindrically symmetric expansion dynamics of tin microdroplets after ultrashort laser pulse impact

2021 ◽  
Vol 127 (2) ◽  
Author(s):  
Tiago de Faria Pinto ◽  
Jan Mathijssen ◽  
Randy Meijer ◽  
Hao Zhang ◽  
Alex Bayerle ◽  
...  
Keyword(s):  
Laser Pulse ◽  
Laser Pulses ◽  
Femtosecond Laser Pulses ◽  
Droplet Deformation ◽  
Cylindrically Symmetric ◽  
Linearly Polarized ◽  
Particle Hydrodynamics ◽  
Deformation Dynamics ◽  
Smoothed Particle ◽  
Asymmetric Shock

AbstractIn this work, the expansion dynamics of liquid tin micro-droplets irradiated by femtosecond laser pulses were investigated. The effects of laser pulse duration, energy, and polarization on ablation, cavitation, and spallation dynamics were studied using laser pulse durations ranging from 220 fs to 10 ps, with energies ranging from 1 to 5 mJ, for micro-droplets with an initial radius of 15 and 23 $$\upmu$$ μ m. Using linearly polarized laser pulses, cylindrically asymmetric shock waves were produced, leading to novel non-symmetric target shapes, the asymmetry of which was studied as a function of laser pulse parameters and droplet size. A good qualitative agreement was obtained between smoothed-particle hydrodynamics simulations and high-resolution stroboscopic experimental data of the droplet deformation dynamics.

scholarly journals Nanometre-Scale Visualization of Chemical Parameter Changes by T1-Weighted ODMR Imaging Using a Fluorescent Nanodiamond

Chemosensors ◽  
2020 ◽  
Vol 8 (3) ◽  
pp. 68
Author(s):  
Takahiro Fujisaku ◽  
Ryuji Igarashi ◽  
Masahiro Shirakawa
Keyword(s):  
Magnetic Resonance ◽  
Laser Pulse ◽  
Real Time ◽  
Physical Parameters ◽  
Biological Processes ◽  
Chemical Parameter ◽  
Ph Conditions ◽  
Optically Detected ◽  
Life Phenomena ◽  
Selection Of

The dynamics of physical parameters in cells is strongly related to life phenomena; thus, a method to monitor and visualize them on a single-organelle scale would be useful to reveal unknown biological processes. We demonstrate real-time nanometre-scale T1-weighted imaging using a fluorescent nanodiamond. We explored optically detected magnetic resonance (ODMR) contrast at various values of interval laser pulse (τ), showing that sufficient contrast is obtained by appropriate selection of τ. By this method, we visualized nanometre-scale pH changes using a functionalized nanodiamond whose T1 has a dependence on pH conditions.

ENERGETIC PROTON ACCELERATION BY ULTRAINTENSE LASER PULSES IN INHOMOGENEOUS PLASMA TARGETS

2007 ◽  
Vol 21 (03n04) ◽  
pp. 642-646 ◽  
Author(s):  
A. ABUDUREXITI ◽  
Y. MIKADO ◽  
T. OKADA
Keyword(s):  
Laser Pulse ◽  
Inhomogeneous Plasma ◽  
Laser Pulses ◽  
Proton Acceleration ◽  
Particle In Cell ◽  
Target Plasma ◽  
Plasma Target ◽  
Experimental Process ◽  
Foil Target ◽  
Proton Bunch

Particle-in-Cell (PIC) simulations of fast particles produced by a short laser pulse with duration of 40 fs and an intensity of 1020W/cm2 interacting with a foil target are performed. The experimental process is numerically simulated by considering a triangular concave target illuminated by an ultraintense laser. We have demonstrated increased acceleration and higher proton energies for triangular concave targets. We also determined the optimum target plasma conditions for maximum proton acceleration. The results indicated that a change in the plasma target shape directly affects the degree of contraction accelerated proton bunch.

Sign in / Sign up

Export Citation Format

Share Document