scholarly journals Appraisal of the Challenges to Ensuring Occupational Health and Safety Compliance within the Nigerian Construction Industry

Author(s):  
Charles I. Arum ◽  
Temidayo O. Osunsanmi ◽  
Clinton O. Aigbavboa

The construction industry is known for the high number of accidents occurring within the industry. This is due to the hazardous working processes which have led to severe injuries, disabilities and fatalities. Towards reducing this hazards numerous health and safety regulations have been provided by construction firms in Nigeria. Despite the provision of the regulations hazards and accidents is still experienced on construction sites. Thus, this study appraised the challenges of ensuring compliance with health and safety regulations by construction workers in the Nigeria construction industry. Data were obtained from safety personnel and construction professionals using questionnaires through a convenience sampling method. One hundred and thirty-eight were used for the analysis out of one hundred and sixty-eight that was distributed to the respondents. The questionnaire was analysed using SPSS V 24 adopting Factor analysis and mean item score. The findings clearly show that construction workers compliance to health and safety requirements is below average while the factor analysis shows inadequate safety equipment, low awareness to occupational health and poor compliance to health and safety requirements are the major challenges hindering the compliance rate. The study recommends that implementation of the use of innovative measures and hi-tech devices such as radio frequency identification for effective monitoring of construction workers. It also recommends the involvement of construction workers when making the health and safety policies. This study contributes towards improving the occupational safety experienced on construction sites within the country.

2017 ◽  
Vol 5 (1) ◽  
pp. 60
Author(s):  
Emma Maano Nghitanwa ◽  
Lindiwe I Zungu

The purpose of this study is to discuss the awareness on the provision of occupational health and safety (OHS) among construction workers in the construction industry of Windhoek, Namibia. A quantitative, descriptive, cross sectional design was applied. Interviewer- led questionnaires were used to collect the data among 549 participants. The study results showed that most construction workers express poor awareness on construction industry OHS provision. The interventions such as OHS training enforcement is needed in order to increase construction workers OHS awareness through training. The employees need to establish OHS programs on the construction sites which include the development of the OHS policies which shows organisation commitment towards occupational health and safety of its workers.


2020 ◽  
Vol 10 (19) ◽  
pp. 6690
Author(s):  
Marek Sawicki ◽  
Mariusz Szóstak

The value, care, and customs of workers are essential in terms of occupational health and safety. The abuse of alcohol is widely regarded as a serious threat to the lives, health, and safety of employees. The aim of the research was to identify the main problems that are associated with alcohol abuse and consumption at work among employees in the construction industry, with particular emphasis on workstations where work is carried out on construction scaffoldings. Data for the analysis were obtained from two different sources. The first one was post-accident documentation on occupational accidents. The second one was surveys collected during the research project. This study confirmed that excessive and disproportionate alcohol consumption can be the cause of an accident, and consequently death at workplaces with scaffolding. Of 219 accident reports, 17.4% indicated alcohol as a contributing factor. Analysis of accident documentations shows that in cases where alcohol was indicated as a contributing factor in an accident, the alcohol was consumed during the workday. The results obtained on the basis of the conducted research were able to constitute a justification for the directions of preventive actions carried out in order to reduce the number of occupational accidents in the construction industry caused by alcohol.


2010 ◽  
Vol 16 (4) ◽  
pp. 499-509 ◽  
Author(s):  
Romuald A. Rwamamara ◽  
Ove Lagerqvist ◽  
Thomas Olofsson ◽  
Bo M. Johansson ◽  
Kazys Algirdas Kaminskas

Many construction work tasks are physically very strenuous and the incidence of work‐related musculoskeletal disorders (WMSDs) among construction workers is considerably higher than those in most other occupations. The aim of the study presented in this paper was to contribute to understanding a healthy construction site brought about by the best practices implemented by large construction sites to prevent WMSDs. A triangulation method made of interviews, site observations and studies on company's documents was used to identify the best practices in 13 several construction projects. A range of the best practices both in the pre‐construction and construction phases of the projects were identified in six different areas of the balance of the construction workplace system; however, there seems to be a significant need for good practices in the management of a systematic work environment. It is now established that Swedish construction industry has several best practices to protect work‐related musculoskeletal health. However, inadequate worker participation and the neglect of health and safety issues by designers in the planning process as well as the implications of some remuneration methods on the production schedule were perceived as detrimental to the musculoskeletal health of construction workers. Santrauka Daug statybos darbu yra fiziškai labai itempti, o su darbu susijusiu raumenu ir skeleto sistemos pažeidimu dažnis tarp statybininku yra kur kas aukštesnis negu tarp daugelio kitu profesiju. Šio tyrimo tikslas – pletoti supratima apie sveikatos būkle ir jos svarba dirbant statybu aikštelese, igyvendinant didelius statybos objektus, siekiant išvengti su darbu susijusiu raumenu ir skeleto sistemos pažeidimu. Tyrimams buvo taikytas interviu, pagristas trianguliacijos metodu, darbo procesu stebejimo statybos aikštelese metodas, buvo nagrineti statybos kompaniju dokumentai, siekiant identifikuoti 13 skirtingu statybos projektu. Geriausia praktika, prieš pradedant statybas ir jau statant, buvo nustatyta šešiuose skirtinguose statybu regionuose, tačiau tokia praktika yra svarbi darbo aplinkos vadyboje. Pripažinta, kad Švedijos statybos pramoneje taikomi keli būdai, kaip apsaugoti statybininkus nuo raumenu ir skeleto sistemos pažeidimu. Vis delto mažas darbininku domejimasis šia problema, sveikatos bei saugos problemu nepaisymas planavimo procese, kai kuriu atsilyginimo būdu itraukimas i gamybos veiksniu saraša buvo vertinti kaip faktoriai, žalingai veikiantys statybininku raumenu ir skeleto sistema.


2021 ◽  
Vol 11 (1) ◽  
pp. 30-36
Author(s):  
Patricia Omega Kukoyi ◽  
Innocent Chigozie Osuizugbo ◽  
Hosea Shemang Yohanna ◽  
Uche Emmanuel Edike ◽  
Israel Esther Ohiseghame

AbstractContractors, among other construction stakeholders, are vital in achieving the set goals of a project. Adequately engaging a capable contractor is an important task for a client. This study aims at determining the reasons for clients contending with contractors that are not committed to health and safety (H&S). The study was conducted through a literature review, a questionnaire was developed and distributed to 286 construction stakeholders in the Nigerian construction industry. Cronbach alpha was used to test the reliability of the questionnaire used for data collection. Mean scores (MSs) were adopted to determine the major factors that influence clients’ selections and factor analysis was used to cluster variables of high inter-correlations. Findings from the survey reveal that H&S is not a clients’ goal or a project value hence, H&S is not viewed as a vital pre-qualification criterion for contractor selection. This results in a poor checklist concerning contractors’ quality assurance and inadequate verification of contractors’ H&S history. Therefore, appointing non-compliant H&S contractors. The findings provide information on the influence clients have respecting H&S as a prequalification criterion and towards construction workers’ H&S. This will enable construction stakeholders to make the right decision in the pre-qualification of contractors.


2018 ◽  
Vol 65 ◽  
pp. 03003 ◽  
Author(s):  
Ismaila Oladunni Muhammed ◽  
Adegbenga Raphael Ashiru

Construction industry has been attributed to be the growth of Nigerian economic and infrastructural development. Annual reports show that consistent accidents on construction sites in Zamfara State has affected substantial number of workers as they become temporarily or permanently disabled, thereby making many construction sites a death trap. It is as a result of high construction site accident currently experiencing in Zamfara state that this research was carried out to appraise the sustainability of health and safety of construction workers on sites. Subsequently, SPSS Version 20 was used to analyse descriptive statistical analysis. Furthermore, the findings highlighted that the performance and output of construction workers on construction sites depends on proper practice of health and safety. The research findings also recommended ways to enhance employers and employee’s compliance to existing laws guiding health and safety on Zamfara State construction sites.


2019 ◽  
Vol 24 (3) ◽  
pp. 655-671
Author(s):  
Lesiba George Mollo ◽  
Fidelis Emuze ◽  
John Smallwood

Purpose The manufacturing industry is a well-known source of interventions adapted to solve problems in the construction industry. The use of Training-Within-Industry (TWI) is one such intervention adopted in the construction industry to solve the construction problem relating to occupational health and safety (OHS). The objectives of TWI are to help the industry to transfer knowledge and skills from management to the employees. Therefore, the purpose of this paper was to investigate whether TWI can reduce OHS problems by promoting “learning by doing” on construction sites. Design/methodology/approach A case-based-research method was used to investigate the reported OHS problems in the construction industry in South Africa. The data were quantitative and qualitative in nature; the questionnaire survey, semi-structured interview and focus group interview techniques were used to collect data in the study. Findings The findings provide a better understanding of the human contributions influencing the behaviour of people causing accidents on construction sites. The data show that construction project leaders struggle to promote “learning by doing” because of inappropriate behaviour, lack of communication and inadequate training provided to new workers on construction sites. Also, there is significant scope for TWI deployment in construction because of the inability of supervisors or management to promote “learning by doing” on construction sites. Practical implications Based on the research findings, it is discovered that OHS is a serious concern in the construction industry. Therefore, the adoption of learning by doing on a construction site would help to improve OHS outcome. Originality/value The study highlights the need to introduce TWI on construction sites to reduce human failure causing accidents. TWI could lead to improving the knowledge- and skills-transfer programmes for construction workers in favour of better safety performance.


2017 ◽  
Vol 1 (2) ◽  
pp. 55-64
Author(s):  
Chioma Sylvia Okoro ◽  
Innocent Musonda

The health and safety (H&S) of site workers in the construction industry has been overwhelmingly studied for decades. However, there is scant literature which analyses underlying structures of safety performance measures especially as related to their unhealthy and unsafe eating behavior. The paper presents findings on an exploratory factor analysis of H&S performance measures. A 10-item questionnaire which was developed after an extensive literature review was used to collect empirical data on SP of construction workers in the Gauteng Province of South Africa. Findings revealed that safety performance of site workers could be reasonably measured by two constructs. The two constructs were clearly defined as trailing and prevailing. The emerged trailing measures were named lagging indicators while the prevailing ones were designated as leading indicators. The results support extant literature which advocates the use of both leading and lagging safety performance indicators for effectively assessing construction workers’ safety performance. The study provides evidence which could be beneficial in psychometric evaluation of construction workers’ safety performance and behaviours on construction sites.Keywords: construction workers, factor analysis, Gauteng, safety performance 


Author(s):  
Amadou Barrow ◽  
Solomon P. S. Jatta ◽  
Musa Nget ◽  
Rex A. Kuye

Background: Providing occupational health and safety (OHS) services to employees has been a global problem for an extended period. A safe workplace should pose no avoidable risk to employees' physical, psychological, or social wellbeing and should provide opportunities for employees to improve and support their health. This study aimed to assess the occupational health and safety risks and hazards among workers at the construction sites in Kombo North District of the Gambia. Methods: A mixed-method study design was conducted across construction workers in Kombo North District, West Coast Region of the Gambia. Data was generated using validated OHS risk assessment matrix, structured questionnaires, environmental and physical inspection and key informant interviews. Descriptive statistics, including a composite scoring system, were used to present the results of this study. Results: Of the 157 respondents in this study, 98.1% were males, and about one-third of these construction workers were 31-40 years of age. About 46% and 34.4% spent 1-5 and 6-10 years in the construction industry, while about 40.2% of the respondents never been to school. The study revealed that physical risks and hazards in the form of falling from a height, electric shock, etc. were the most common forms compared to other categories such as ergonomics, biological and chemical risks and hazards. There is no reporting system or registry in place across the study sites. Conclusion: This study provides evidence that physical hazards reported being the most common across other forms of ergonomics, biological and chemical risk and hazards. There is an urgent need for reactivation and implementation of OHS advocacies, health education, and other preventive strategies to control common workplace risks and hazards in their various forms.


2017 ◽  
Vol 5 (1) ◽  
pp. 67 ◽  
Author(s):  
Emma Maano Nghitanwa ◽  
Lindiwe I Zungu

Non compliances towards occupational health and safety legislations has been on increase globally which leads to higher incidence of occupational accidents, injuries and diseases. The aim of the study is to determine the presence of occupational hazards in the construction industry and to investigate the occupational health and safety provision and compliance among construction sites in Windhoek. A quantitative, cross-sectional, descriptive design was used to conduct the study. Census sampling was used to include ten construction sites with project running during data collection time and whose site managers agreed to participate in the study. Data was collected in ten construction sites with the site inspection checklist to assess the occupational hazards and OHS compliance in participated construction sites. Data was analysed with SPSS software. The study findings indicated that occupational hazards are prevalent in the construction industry, but there is poor mechanism to control hazards and to prevent hazard exposures. Furthermore, most construction sites are non compliant towards OHS legislations. It is recommended that OHS legislations should be enforced to promote the OHS in the construction industry.


Sign in / Sign up

Export Citation Format

Share Document