scholarly journals Ore Minerals from the Lamproite Ground Mass

2019 ◽  
Keyword(s):  
Ore Minerals ◽  
Ground Mass

Spectrographic Studies on Some Ore Minerals (Part 1)

1958 ◽  
Vol 3 (6) ◽  
pp. 693-701
Author(s):  
Kiyoshi Takimoto ◽  
Taneo Minato
Keyword(s):  
Ore Minerals

scholarly journals Characterization and mapping of hematite ore mineral classes using hyperspectral remote sensing technique: a case study from Bailadila iron ore mining region

2021 ◽  
Vol 3 (2) ◽  
Author(s):  
Ibrahim Shaik ◽  
S. K. Begum ◽  
P. V. Nagamani ◽  
Narayan Kayet
Keyword(s):  
Infrared Absorption ◽  
Near Infrared ◽  
Spectral Feature ◽  
Absorption Feature ◽  
X Ray ◽  
Remote Sensing Technique ◽  
Ore Minerals ◽  
Feature Fitting ◽  
Hematite Ore

AbstractThe study demonstrates a methodology for mapping various hematite ore classes based on their reflectance and absorption spectra, using Hyperion satellite imagery. Substantial validation is carried out, using the spectral feature fitting technique, with the field spectra measured over the Bailadila hill range in Chhattisgarh State in India. The results of the study showed a good correlation between the concentration of iron oxide with the depth of the near-infrared absorption feature (R2 = 0.843) and the width of the near-infrared absorption feature (R2 = 0.812) through different empirical models, with a root-mean-square error (RMSE) between < 0.317 and < 0.409. The overall accuracy of the study is 88.2% with a Kappa coefficient value of 0.81. Geochemical analysis and X-ray fluorescence (XRF) of field ore samples are performed to ensure different classes of hematite ore minerals. Results showed a high content of Fe > 60 wt% in most of the hematite ore samples, except banded hematite quartzite (BHQ) (< 47 wt%).

Mechanism of mixed dithiophosphate and mercaptobenzothiazole collectors for Cu sulfide ore minerals

2017 ◽  
Vol 109 ◽  
pp. 80-97 ◽  
Author(s):  
Alan N. Buckley ◽  
Gregory A. Hope ◽  
Gretel K. Parker ◽  
Johan Steyn ◽  
Ronald Woods
Keyword(s):  
Sulfide Ore ◽  
Ore Minerals

scholarly journals Rare and Critical Metals in Pyrite, Chalcopyrite, Magnetite, and Titanite from the Vathi Porphyry Cu-Au±Mo Deposit, Northern Greece

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 630
Author(s):  
Christos L. Stergiou ◽  
Vasilios Melfos ◽  
Panagiotis Voudouris ◽  
Lambrini Papadopoulou ◽  
Paul G. Spry ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Mineral Chemistry ◽  
Critical Metals ◽  
Northern Greece ◽  
Inductively Coupled ◽  
Porphyry Cu ◽  
Icp Ms ◽  
Quartz Monzonite ◽  
Ore Minerals ◽  
Plasma Mass Spectrometry

The Vathi porphyry Cu-Au±Mo deposit is located in the Kilkis ore district, northern Greece. Hydrothermally altered and mineralized samples of latite and quartz monzonite are enriched with numerous rare and critical metals. The present study focuses on the bulk geochemistry and the mineral chemistry of pyrite, chalcopyrite, magnetite, and titanite. Pyrite and chalcopyrite are the most abundant ore minerals at Vathi and are related to potassic, propylitic, and sericitic hydrothermal alterations (A- and D-veins), as well as to the late-stage epithermal overprint (E-veins). Magnetite and titanite are found mainly in M-type veins and as disseminations in the potassic-calcic alteration of quartz monzonite. Disseminated magnetite is also present in the potassic alteration in latite, which is overprinted by sericitic alteration. Scanning electron microscopy and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) analyses of pyrite and chalcopyrite reveal the presence of pyrrhotite, galena, and Bi-telluride inclusions in pyrite and enrichments of Ag, Co, Sb, Se, and Ti. Chalcopyrite hosts bornite, sphalerite, galena, and Bi-sulfosalt inclusions and is enriched with Ag, In, and Ti. Inclusions of wittichenite, tetradymite, and cuprobismutite reflect enrichments of Te and Bi in the mineralizing fluids. Native gold is related to A- and D-type veins and is found as nano-inclusions in pyrite. Titanite inclusions characterize magnetite, whereas titanite is a major host of Ce, Gd, La, Nd, Sm, Th, and W.

Gravity-flotation gold-bearing ore concentration

2021 ◽  
Vol 1 (1) ◽  
pp. 4-15
Author(s):  
P. K. Fedotov ◽  
A. E. Senchenko ◽  
K. V. Fedotov ◽  
A. E. Burdonov
Keyword(s):  
High Performance ◽  
Gold Recovery ◽  
Gold Content ◽  
Flotation Concentrate ◽  
Stage Scheme ◽  
Study Results ◽  
Ore Minerals ◽  
Concentrate Yield ◽  
Flotation Concentration ◽  
Gold Bearing

The paper focuses on the study of the gold-bearing ore dressability. According to technological research, the average gold content is 11.88 g/t. The silver content is insignificant – 2.43 g/t. Main ore minerals in the sample are pyrite and pyrrhotite. According to mineralogical and X-ray structural analysis, the average content of these minerals in the ore is about 6 % (in total). Main rock-forming minerals of the original ore are: quartz (60.1 %), quartz-chlorite-mica aggregates (3.8 %), carbonates (7.1 %). According to the study results, it was found that the gold recovery in the GRG test was 72.75 % with a total concentrate yield of 1.34 % and a content of 664.78 g/t. At the same time, the gold content in tailings was 3.29 g/t. A stage test showed that it is advisable to use a two-stage scheme for ore processing by gravity technology only. The first stage is in the grinding cycle with the 60–70 % ore size, and the second stage is with the final classifier overflow size of 90 % –0.071 mm. Centrifugal separation has high performance as a free gold recovery operation in the grinding cycle. A concentrate with a gold content of 2426 g/t was obtained with a yield of 0.31 % and a recovery of 63.74 %. The beneficiation of first stage tailings ground to 90 % –0.071 mm at the KC-CVD concentrator (modeling) made it possible to extract gold into a total gravity concentrate (KC-MD + KC-CVD) of 87.25 % with a concentrate yield of 22.63 %. The gold content in tailings was 1.97 g/t. The results of gravity and flotation concentration of the original ore indicate the feasibility of using a combined gravity-flotation technological scheme. In a closed experiment of the initial ore beneficiation according to the gravity-flotation scheme at a natural pH of the pulp (without adding acid), the following products were obtained: gravity concentrate with a gold content of 2426 g/t at a yield of 0.31 % and recovery of 64.06 %; flotation concentrate (after the II cleaning) with a gold content of 122 g/t at a yield of 2.90 % and recovery of 33.01 %; the total gold recovery in the gravity-flotation concentrate was 94.07 % with a yield of 3.21 % and an Au content of 345.87 g/t, the gold content in the flotation tailings was 0.72 g/t.

scholarly journals Indium and selenium distribution in the Neves-Corvo deposit, Iberian Pyrite Belt, Portugal

2018 ◽  
Vol 82 (S1) ◽  
pp. S5-S41 ◽  
Author(s):  
J. R. S. Carvalho ◽  
J. M. R. S. Relvas ◽  
A. M. M. Pinto ◽  
M. Frenzel ◽  
J. Krause ◽  
...  
Keyword(s):  
Massive Sulfide ◽  
Iberian Pyrite Belt ◽  
Sulfide Deposit ◽  
Massive Sulfide Deposit ◽  
Actual Distribution ◽  
Shear Structures ◽  
Ore Minerals ◽  
High Concentrations ◽  
Ore Types ◽  
Zinc Concentrate

ABSTRACTHigh concentrations of indium (In) and selenium (Se) have been reported in the Neves-Corvo volcanic-hosted massive sulfide deposit, Portugal. The distribution of these ore metals in the deposit is complex as a result of the combined effects of early ore-forming processes and late tectonometamorphic remobilization. The In and Se contents are higher in Cu-rich ore types, and lower in Zn-rich ore types. At the deposit scale, both In and Se correlate positively with Cu, whereas their correlations with Zn are close to zero. This argues for a genetic connection between Cu, In and Se in terms of metal sourcing and precipitation. However, re-distribution and re-concentration of In and Se associated with tectonometamorphic deformation are also processes of major importance for the actual distribution of these metals throughout the whole deposit. Although minor roquesite and other In-bearing phases were recognized, it is clear that most In within the deposit is found incorporated within sphalerite and chalcopyrite. When chalcopyrite and sphalerite coexist, the In content in sphalerite (avg. 1400 ppm) is, on average, 2–3 times higher than in chalcopyrite (avg. 660 ppm). The In content in stannite (avg. 1.3 wt.%) is even higher than in sphalerite, but the overall abundance of stannite is subordinate to either sphalerite or chalcopyrite. Selenium is dispersed widely between many different ore minerals, but galena is the main Se-carrier. On average, the Se content in galena is ~50 times greater than in either chalcopyrite (avg. 610 ppm) or sphalerite (avg. 590 ppm). The copper concentrate produced at Neves-Corvo contains very significant In (+Se) content, well above economic values if the copper smelters recovered it. Moreover, the high In content of sphalerite from some Cu-Zn ores, or associated with shear structures, could possibly justify, in the future, a selective exploitation strategy for the production of an In-rich zinc concentrate.

The Mineral Characteristics and Occurrence of Gold in Nali Gold Deposit, Guangxi

2014 ◽  
Vol 936 ◽  
pp. 2383-2388
Author(s):  
Zhi Wen Li ◽  
Cheng Dong Liu ◽  
Xuan Qing Zhao ◽  
Jian Hui Lu ◽  
Guo Lin Guo
Keyword(s):  
Gold Deposit ◽  
Mineral Composition ◽  
Electron Probe ◽  
Mining Area ◽  
Optical Microscope ◽  
Analysis Techniques ◽  
Mineral Characteristics ◽  
Ore Minerals

Using the analysis techniques of polarizing optical microscope and electron probe, mineral composition, ore texture and structure and the occurrence of Au in the primary ore are studied. The research shows that the main ore minerals in the ore include realgar, pyrite and arsenopyrite etc. Sulfur-stibarsen is the main carrier of Au, and is the major associated mineral of realgar, surrounded mainly by realgar, and partly is the associated mineral of arsenopyrite. The existence of visible gold and microscopic gold in the ore of this mining area can be excluded, and the gold might exist mainly in the form of inclusion gold, which is the so-called “nanoAu”.

Sign in / Sign up

Export Citation Format

Share Document