Success Story of Single-Job Multiple Zones Chemical Sand Consolidation in Mahakam Delta

2020 ◽  
Author(s):  
S. Warsito
Keyword(s):  
Differential Pressure ◽  
Curing Time ◽  
Success Story ◽  
Additional Risk ◽  
Success Ratio ◽  
Coiled Tubing ◽  
Mahakam Delta ◽  
Resin Curing

Multiple zones chemical sand consolidation jobs are often avoided because of low success ratio. Strict operational and technical limitations must be respected to ensure the quality of the treatment. Conventional chemical sand consolidation operations performed in Delta Mahakam were done by using coiled tubing and packer to inject the resin into single reservoir. Multi-zone chemical sand consolidation poses additional risk of interfering with newly treated formation. Therefore, a temporary plug was installed in between the reservoirs which serve as temporary isolation to prevent the newly treated formation. The plug needs to withstand maximum differential pressure which would be exerted during the treatment. Other important factors include to test the limitations of resin curing time prior to proceed with the next treatment.

scholarly journals Proportion and risk factors for death by euthanasia in dogs in the UK

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Camilla Pegram ◽  
Carol Gray ◽  
Rowena M. A. Packer ◽  
Ysabelle Richards ◽  
David B. Church ◽  
...  
Keyword(s):  
Risk Factors ◽  
Poor Quality ◽  
Clinical Factors ◽  
Sampling Frame ◽  
Additional Risk ◽  
Factors Associated ◽  
Regression Modelling ◽  
The Uk ◽  
Logistic Regression Modelling

AbstractThe loss of a pet can be particularly distressing for owners, whether the method of death is euthanasia or is unassisted. Using primary-care clinical data, this study aimed to report the demographic and clinical factors associated with euthanasia, relative to unassisted death, in dogs. Method of death (euthanasia or unassisted) and clinical cause of death were extracted from a random sample of 29,865 dogs within the VetCompass Programme from a sampling frame of 905,544 dogs under UK veterinary care in 2016. Multivariable logistic regression modelling was used to evaluate associations between risk factors and method of death. Of the confirmed deaths, 26,676 (89.3%) were euthanased and 2,487 (8.3%) died unassisted. After accounting for confounding factors, 6 grouped-level disorders had higher odds in euthanased dogs (than dogs that died unassisted), using neoplasia as the baseline. The disorders with greatest odds included: poor quality of life (OR 16.28), undesirable behaviour (OR 11.36) and spinal cord disorder (OR 6.00). Breed, larger bodyweight and increasing age were additional risk factors for euthanasia. The results highlight that a large majority of owners will face euthanasia decisions and these findings can support veterinarians and owners to better prepare for such an eventuality.

scholarly journals In the pursuit of equity: COVID-19, data and Aboriginal and Torres Strait Islander people in Australia

2021 ◽  
Vol 37 (1) ◽  
pp. 37-45
Author(s):  
Kalinda Griffiths ◽  
Ian Ring ◽  
Richard Madden ◽  
Lisa Jackson Pulver
Keyword(s):  
Public Health ◽  
Torres Strait Islander ◽  
Self Determination ◽  
Quality Of Data ◽  
Success Story ◽  
Torres Strait Islander People ◽  
Pandemic Planning ◽  
The Future ◽  
Torres Strait

Since March 2020 in Australia, there has been decisive national, and state and territory policy as well as community led action involving Aboriginal and Torres Strait Islander people as information about COVID-19 arose. This has resulted in, what could only be framed as a success story in self-determination. However, there continues to be issues with the quality of data used for the surveillance and reporting of Aboriginal and Torres Strait Islander people during the pandemic. This article discusses some of the important events in pandemic planning regarding Aboriginal and Torres Strait Islander people and how this relates to surveillance and monitoring in the emerging and ongoing threat of COVID-19 within Aboriginal and Torres Strait Islander communities. The authors also identify some of the data considerations required in the future to monitor and address public health.

A Success Story: Utilizing Different Variables in Design and Execution of Coiled Tubing Extended Reach Milling Operations

2020 ◽  
Author(s):  
Kaveh Yekta ◽  
Benjamin Stang ◽  
Scott Hilling ◽  
Chris Schwartz ◽  
Bettina Cheung ◽  
...  
Keyword(s):  
Success Story ◽  
Coiled Tubing ◽  
Milling Operations

Barge Assisted Coiled Tubing in Malay Basin of South China Sea - Pilot Project Success Story

2010 ◽  
Author(s):  
Mohd Hairi Abdul Razak ◽  
Fuad M. Noordin ◽  
M.N. Afendy Yusoff ◽  
Rahmat Wibisono
Keyword(s):  
South China Sea ◽  
South China ◽  
Project Success ◽  
Pilot Project ◽  
Success Story ◽  
China Sea ◽  
Coiled Tubing

Case Study- Real Time Downhole Telemetry CCL and Tension Compression, a Differentiator for Successful Manipulation of ICD's in Horizontal Wells

2021 ◽  
Author(s):  
Usman Ahmed ◽  
Zhiheng Zhang ◽  
Ruben Ortega Alfonzo
Keyword(s):  
Saudi Arabia ◽  
Real Time ◽  
Oil Recovery ◽  
Horizontal Wells ◽  
Differential Pressure ◽  
Successful Operation ◽  
Coiled Tubing ◽  
Electric Line ◽  
Wide Range ◽  
Ict System

Abstract Horizontal well completions are often equipped with Inflow Control Devices (ICDs) to optimize flow rates across the completion for the whole length of the interval and to increase the oil recovery. The ICD technology has become useful method of optimizing production from horizontal wells in a wide range of applications. It has proved to be beneficial in horizontal water injectors and steam assisted gravity drainage wells. Traditionally the challenges related to early gas or water breakthrough were dealt with complex and costly workover/intervention operations. ICD manipulation used to be done with down-hole tractor conveyed using an electric line (e-line) cable or by utilization of a conventional coiled tubing (CT) string. Wellbore profile, high doglegs, tubular ID, drag and buoyancy forces added limitations to the e-line interventions even with the use of tractor. Utilization of conventional CT string supplement the uncertainties during shifting operations by not having the assurance of accurate depth and forces applied downhole. A field in Saudi Arabia is completed with open-hole packer with ICD completion system. The excessive production from the wells resulted in increase of water cut, hence ICD's shifting was required. As operations become more complex due to fact that there was no mean to assure that ICD is shifted as needed, it was imperative to find ways to maximize both assurance and quality performance. In this particular case, several ICD manipulating jobs were conducted in the horizontal wells. A 2-7/8-in intelligent coiled tubing (ICT) system was used to optimize the well intervention performance by providing downhole real-time feedback. The indication for the correct ICD shifting was confirmed by Casing Collar Locator (CCL) and Tension & Compression signatures. This paper will present the ICT system consists of a customized bottom-hole assembly (BHA) that transmits Tension, compression, differential pressure, temperature and casing collar locator data instantaneously to the surface via a nonintrusive tube wire installed inside the coiled tubing. The main advantages of the ICT system in this operation were: monitoring the downhole force on the shifting tool while performing ICD manipulation, differential pressure, and accurately determining depth from the casing collar locator. Based on the known estimated optimum working ranges for ICD shifting and having access to real-time downhole data, the operator could decide that required force was transmitted to BHA. This bring about saving job time while finding sleeves, efficient open and close of ICD via applying required Weight on Bit (WOB) and even providing a mean to identify ICD that had debris accumulation. The experience acquired using this method in the successful operation in Saudi Arabia yielded recommendations for future similar operations.

scholarly journals Effect of Post-Process Curing and Washing Time on Mechanical Properties of mSLA Printouts

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4856
Author(s):  
Bartłomiej Nowacki ◽  
Paweł Kowol ◽  
Mateusz Kozioł ◽  
Piotr Olesik ◽  
Jakub Wieczorek ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Bending Strength ◽  
Curing Time ◽  
Cross Sectional ◽  
Post Process ◽  
Order Of Magnitude ◽  
Static Tensile ◽  
High Roughness ◽  
Ambiguous Effect

The article discusses the influence of the post-process on the mechanical properties of elements produced with the use of the mask stereolithography (mSLA) method. Printed samples were subjected to the following post-process steps: Washing and post-curing, at various times. Then, static tensile and static bending tests were carried out, as well as Shore D hardness measurements for the inner and surface part of the sample, as well as profilographometric analysis of the surface. The post-curing time has been found to strongly affect the tensile and bending strength of printouts, and to improve their surface quality. Washing has an ambiguous effect on the strength of the printouts, but, in the end, it was found that extended washing slightly reduces the strength. Washing significantly affects the quality of the printout surface. A washing time that is too short results in a surface that strongly resembles the printing process, with high roughness. Increasing the washing time to 10 min lowers the roughness by one order of magnitude. Post-curing has also been shown to be beneficial for the cured sample with the application of shielding water. This approach results in an improvement in the flexural strength of the printouts. In general, the obtained research results indicate that, for printouts with cross-sectional dimensions of several mm, the optimal washing time is no more than 10 min and the post-curing time is at least 30 min.

scholarly journals AKSEPTABILITAS DAN SIFAT DAGING ITIK AFKIR YANG DILAKUKAN CURING MENGGUNAKAN EKSTRAK KURKUMIN KUNYIT UNTUK MENGHAMBAT OKSIDASI LEMAK SELAMA PENYIMPANAN

2015 ◽  
Vol 34 (04) ◽  
pp. 415 ◽  
Author(s):  
Sri Hartati Candra Dewi ◽  
Niken Astuti
Keyword(s):  
Fatty Acids ◽  
Peroxide Value ◽  
Frozen Storage ◽  
Oxidation Potential ◽  
Curing Time ◽  
Turmeric Extract ◽  
Randomized Design ◽  
Fatty Acid Peroxidation ◽  
Age Range

Rejected-duck meat was obtained from old laying duck that unproductive aged 24-26 months. The purpose of this study was to determine the oxidation potential of curcumin extract and its potential in curing rejects the acceptability of duck meat and meat properties during frozen storage. The material used was 36 female rejected-duck the age range 24-26months. The experimental design used was completely randomized design with 3x4 factorial variation. This factor of 0.0 %; 0.1 % ; 0.2 % and 0.3 % curcumin extract and the curing time 5, 10 and 20 minutes. The parameters examined included the acceptability of duck meat cured was determined by the method of Hedonic Test, moisture content , fatcontent, fatty acids and peroxide value of frozen storage for 8 weeks. The results showed that duck meatwas acceptable salvage most of duck meat with curing using 0.3 % turmeric extract with a curing time for 10 minutes. The addition of curcumin turmeric extract the meat of rejected-ducks could inhibit fatty acid peroxidation approximately 39.55 m.eq in frozen storage for five weeks. Water content and fat showed no real difference. However, free fatty acids increased significantly up to 5 weeks. Peroxide value increased until the fifth week of 39.55 %, and then decreased. From thisstudy it can be concluded that the best use extract acceptability of curcumin 0.3 % with long curing 10 minutes, the frozen storagefor8weeks.Keywords: Rejected- ducks meat, curcumin, antioxidant, acceptability and quality of the meat ABSTRAKDaging itik afkir diperoleh dari itik petelur yang sudah tidak produktif yang berumur 24-26 bulan. Tujuan penelitian ini adalah untuk mengetahui potensi oksidasi dari ekstrak kurkumin dan potensinya dalam curing daging itik afkir terhadap akseptabilitas dan sifat daging selama penyimpanan beku.Materi yang digunakan 36 ekor itik betina afkirdengan kisaran umur 24-26 bulan. Rancangan percobaan yang digunakan adalah rancangan acak lengkap pola faktorial 3x4 dengan faktor variasi ekstrak kurkumin 0,0%; 0,1%; 0,2% dan 0,3% dan lama curing 5, 10 dan 20 menit. Parameter yang diteliti meliputi akseptabilitas daging itik curing ditentukan dengan metode Hedonic Test, kadar air, kadar lemak,asam lemak dan angka peroksida penyimpanan beku selama 8 minggu. Hasil penelitian menunjukkan bahwa daging itik afkir yang paling akseptabel adalah daging itik dengan curing menggunakan 0,3% ekstrak kunyit dengan lama curing selama 10 menit. Penambahan ekstrak kurkumin kunyit pada daging itik afkir mampu menghambat peroksidasi asam lemak sekitar 39,55% pada penyimpanan beku selama lima minggu. Kadar air dan lemak menunjukkan perbedaan yang tidak nyata. Namun asam lemak bebas mengalami kenaikan yang signifikan sampai minggu ke 5. Angka peroksida meningkat sampai minggu kelima sebesar 39,55 m.eq, kemudian menurun. Dari penelitian ini dapat disimpulkan bahwa akseptabilitas terbaik menggunakan ekstrak kurkumin 0,3% dengan lama curing 10 menit, pada penyimpanan beku selama 8 minggu.Kata kunci:Daging itik afkir, antioksidan kurkumin, akseptabilitas dan kualitas daging

Moisture Absorption Finishing of Polyester Fabric

2013 ◽  
Vol 275-277 ◽  
pp. 2182-2185
Author(s):  
Jun Zhang
Keyword(s):  
Moisture Absorption ◽  
Process Condition ◽  
Polyester Fabric ◽  
Curing Temperature ◽  
Optimum Process ◽  
Curing Time ◽  
Drying Time ◽  
Moisture Management ◽  
Finishing Agent

Polyester fabric was finished by water-absorbent and quick-dry agent Casofter-252 and moisture management agent Hipom-790 for improving its moisture management property. The quality of moisture absorption finishing of the polyester fabric was detected in terms of wicking height and fast drying time. And the influence of agent concentration, pH, and curing temperature and time on moisture management property was studied in order to obtain the optimum process condition. The best choice for Casofter-252 was agent concentration 20g/L, pH 3, curing temperature 135 oC, curing time 120s, and the optimum finishing condition for Hipom-790 was as follows: agent concentration 30g/L, pH 5, curing at 115 oC for 140 s. The finished polyester fabric under the optimum condition showed much better air permeability. The tensile strength of the fabric increased after moisture finishing with Hipom-790 while it decreased for Casofter-252 used as a finishing agent.

Sign in / Sign up

Export Citation Format

Share Document