Laboratory Test of Chemical Selection for Enhanced Oil Recovery in Fractured Carbonate Reservoirs, Case Study: Kais Formation on Wakamuk Field

2018 ◽  
Author(s):  
Jackson Andreas
Keyword(s):  
Laboratory Test ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Carbonate Reservoirs ◽  
Fractured Carbonate ◽  
Selection For ◽  
Chemical Selection

Flow Physics of Polymer Nanospheres and Diluted Microemulsion in Fractured Carbonate Reservoirs: An Investigation into Enhanced Oil Recovery Mechanisms

SPE Journal ◽  
2021 ◽  
pp. 1-14
Author(s):  
Hang Su ◽  
Fujian Zhou ◽  
Qing Wang ◽  
Fuwei Yu ◽  
Rencheng Dong ◽  
...  
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Recovery Rate ◽  
Carbonate Reservoirs ◽  
Wettability Alteration ◽  
Naturally Fractured ◽  
Fractured Carbonate ◽  
Recovery Mechanisms ◽  
Polymer Nanospheres ◽  
Depth Propagation

Summary Enhanced oil recovery (EOR) in fractured carbonate reservoirs is challenging because of the heterogeneous and oil-wet nature. In this work, a new application of using polymer nanospheres (PNSs) and diluted microemulsion (DME) is presented to plug fractures and enhance water imbibition to recover oil from the tight, naturally fractured carbonate reservoirs. DME with different electric charges is compared through contact-angle and core-imbibition tests to evaluate their performances on EOR. The cationic DME is chosen because it has the fastest wettability-alteration rate and thus the highest oil recovery rate. Migration and plugging efficiency tests are conducted to identify the screened particle sizes of PNSs for the target reservoir cores. PNSs with a particle size of 300 nm are demonstrated to have the best performance of in-depth propagation before swelling and plugging after swelling within the naturally fractured cores are used in this study. Then coreflooding experiments are conducted to evaluate the EOR performance when PNSs and DME are used together, and results indicate that the oil recovery rate is increased by 24.3 and 44.1% compared to using PNSs or DME alone. In the end, a microfluidic experiment is carried out to reveal how DME works with PNSs.

Computed-Tomography-Scan Monitoring of Foam-Based Chemical-Enhanced-Oil-Recovery Processes in Fractured Carbonate Cores

SPE Journal ◽  
2017 ◽  
Vol 22 (03) ◽  
pp. 912-923 ◽  
Author(s):  
B.. Bourbiaux ◽  
E.. Rosenberg ◽  
M.. Robin ◽  
M.. Chabert ◽  
E.. Chevallier ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Pressure Gradient ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Carbonate Reservoirs ◽  
Ct Scanner ◽  
Chemical Additives ◽  
Foaming Agents ◽  
Fractured Carbonate ◽  
The Matrix

Summary Waterflooding is often inefficient in carbonate reservoirs because of the presence of fractures and unfavorable wettability. Oil recovery can be improved by enhancing the following drive mechanisms: Capillary imbibition with wettability modifiers Viscous drive by increasing the pressure gradient in the fracture network Water/oil gravity drainage with low-interfacial-tension (IFT) surfactant formulations that also reduce oil trapping This paper presents an experimental approach that evaluates different chemical-enhanced-oil-recovery (EOR) alternatives on the basis of one or several of the three aforementioned recovery mechanisms. The experiments consist of injecting an aqueous chemical solution or a foam containing chemical additives into an artificially fractured carbonate core. The imbibition is monitored with a recent computed-tomography (CT) scanner allowing the local quantitative monitoring of three phases, including accurate quantification of matrix oil recovery. This paper is mainly focused on the impacts of foaming agents and wettability modifiers (WMs), implemented separately or jointly. The experiments have been conducted on several cores of different permeability, resulting in various permeability contrasts between matrix and fracture. A major result concerns the kinetics of oil recovery by chemical additives that is greatly increased when a viscous drive is applied across the matrix medium by means of the circulation of foam in the fracture. Experiments in fractured cores of different permeabilities indicate that foam does not penetrate the matrix, but drives the chemical aqueous phase into the matrix because of the generated pressure gradient. Detailed analysis of oil-mobilization dynamics is provided. These foam-flow experiments are compared with a former chemical imbibition test on a nonfractured core for further insight into the role played by viscous forces. The comparison of tested recovery scenarios leads to conclusions regarding optimal chemical-EOR strategies for naturally fractured carbonate reservoirs with poor secondary-recovery prognosis.

Saturated carbon dioxide nanofluids enhanced oil recovery in carbonate reservoir cores using nuclear magnetic resonance

2021 ◽  
Author(s):  
Yongsheng Tan ◽  
Qi Li ◽  
Liang Xu ◽  
Xiaoyan Zhang ◽  
Tao Yu
Keyword(s):  
Carbon Dioxide ◽  
Nuclear Magnetic Resonance ◽  
Magnetic Resonance ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Residual Oil ◽  
Core Flooding ◽  
Nuclear Magnetic

<p>The wettability, fingering effect and strong heterogeneity of carbonate reservoirs lead to low oil recovery. However, carbon dioxide (CO<sub>2</sub>) displacement is an effective method to improve oil recovery for carbonate reservoirs. Saturated CO<sub>2</sub> nanofluids combines the advantages of CO<sub>2</sub> and nanofluids, which can change the reservoir wettability and improve the sweep area to achieve the purpose of enhanced oil recovery (EOR), so it is a promising technique in petroleum industry. In this study, comparative experiments of CO<sub>2</sub> flooding and saturated CO<sub>2</sub> nanofluids flooding were carried out in carbonate reservoir cores. The nuclear magnetic resonance (NMR) instrument was used to clarify oil distribution during core flooding processes. For the CO<sub>2</sub> displacement experiment, the results show that viscous fingering and channeling are obvious during CO<sub>2</sub> flooding, the oil is mainly produced from the big pores, and the residual oil is trapped in the small pores. For the saturated CO<sub>2</sub> nanofluids displacement experiment, the results show that saturated CO<sub>2</sub> nanofluids inhibit CO<sub>2</sub> channeling and fingering, the oil is produced from the big pores and small pores, the residual oil is still trapped in the small pores, but the NMR signal intensity of the residual oil is significantly reduced. The final oil recovery of saturated CO<sub>2</sub> nanofluids displacement is higher than that of CO<sub>2</sub> displacement. This study provides a significant reference for EOR in carbonate reservoirs. Meanwhile, it promotes the application of nanofluids in energy exploitation and CO<sub>2</sub> utilization.</p>

Sign in / Sign up

Export Citation Format

Share Document