scholarly journals Factors determining the Phytoplankton variability in the swamps of the Momposina depression (Colombia)

2011 ◽  
Vol 4 (4) ◽  
pp. 105-122
Author(s):  
Yasmín Plata-Díaz ◽  
Astrid-Lorely Pimienta-Rueda
Keyword(s):  
Chloride Content ◽  
Oil Field ◽  
Organic Load ◽  
Significant Variable ◽  
Industrial Operation ◽  
Phytoplankton Dynamic ◽  
Phytoplankton Variability ◽  
Area Of Influence ◽  
Total Hydrocarbons ◽  
Pennate Diatoms

Description  of  the main  environmental  factors  that structure phytoplankton  dynamic  in 27  swamps of the Momposina  Depression  located  in the area  of  influence  of  the Cicuco-Boquete  oil field.  Accor- ding to the results, the parameters  that determined the variations in the physics and  chemistry of the water are related to system hydrology, followed by the variables associated with the industrial operation, particularly in relation to chloride content and natural mineralization, which is due to conductivity and alkalinity. The euglenoids were the most common throughout the study, particularly during low water periods; cyanobacteria density increased in high waters and pennate diatoms in rising water. The lowest average diversity and richness were reported in the systems with the highest domestic and industrial impact as well as in the swamp referenced herein. Variations in phytoplankton composition were not related to the hydrological periods studied. pH, NO3, conducti- vity and the organic load (BOD5), as well as variables indirectly related to the industrial operation (chlorides and COD) were determining variables. Total hydrocarbons were not a significant variable in the community structure.

Characterization of radioiodine therapy failures in Graves’ disease

2001 ◽  
Vol 40 (01) ◽  
pp. 1-6 ◽  
Author(s):  
M. Zimny ◽  
M. Schreckenberger ◽  
P. Reinartz ◽  
B. Nowak ◽  
E. Ostwald ◽  
...  
Keyword(s):  
Radioiodine Therapy ◽  
Thyroid Volume ◽  
Absorbed Dose ◽  
Stepwise Logistic Regression ◽  
Graves Disease ◽  
Significant Variable ◽  
Absorbed Energy ◽  
Volume Function ◽  
Energy Dose

Summary Aim of this study was a characterization of radioiodine therapy (RIT) failures in Graves’ disease without simultaneous Carbimazole. Method: 226 patients with a confirmed diagnosis of Graves’ disease received 686.8 ± 376.4 MBq of iodine-131 orally for thyroid ablation. Target dose was 250 Gy. All patients were followed up for 6 months. Therapy failures were compared with successes regarding possible influencing variables initial thyroid volume, thyroid function, immune activity (TRAb), 1-131 uptake, effective half-life, absorbed energy dose, age and gender. Results: 212 of 226 patients (93.8%) were treated successfully, 14 (6.2%) showed a hyperthyroidism relapse within 6 months which required a second radioiodine therapy. A success rate of 92.5% (62/67) could also be achieved with 67 patients who were hyperthyroid at the time of RIT. Compared to the therapy successes, the 14 failures achieved significantly lower absorbed doses (223.8 ±76.6 Gyvs. 285.2 ±82.1 Gy, ρ <0.005), but with no significant differences regarding age, thyroid volume, function or TRAb (all ρ >0.2). Of the 14 failures, η = 8 reached an absorbed dose <200 Gy and η = 1 a dose <250 Gy, although 5 of the failures reached an absorbed dose of >250 Gy. Stepwise logistic regression revealed only absorbed energy dose as a variable significantly influencing therapy success (p <0.005), but no influence of initial thyroid volume, function, TRAb value, age (all ρ >0.2) or gender (p = 0.13). Two-tailed Fisher’s exact test showed no significant influence of gender on success rates (failures/successes: male 1 /36, female 13/176, ρ = 0.48). Conclusions: Except for the absorbed energy dose, no other significant variable influencing the outcome of radioiodine therapy in Graves’ disease without simultaneous Carbimazole could be found. It should be noted, though, that 5 therapy failures (2.2%) reached an absorbed energy dose of >250 Gy.

Pilot-scale combustion studies with kraft lignin in a powder burner and a CFB boiler

TAPPI Journal ◽  
2010 ◽  
Vol 9 (6) ◽  
pp. 24-30 ◽  
Author(s):  
NIKLAS BERGLIN ◽  
PER TOMANI ◽  
HASSAN SALMAN ◽  
SOLVIE HERSTAD SVÄRD ◽  
LARS-ERIK ÅMAND
Keyword(s):  
Circulating Fluidized Bed ◽  
Black Liquor ◽  
Chloride Content ◽  
Pilot Scale ◽  
High Energy ◽  
Kraft Lignin ◽  
High Energy Density ◽  
Alkali Chloride ◽  
Cfb Boiler ◽  
Solid Biofuel

Processes have been developed to produce a solid biofuel with high energy density and low ash content from kraft lignin precipitated from black liquor. Pilot-scale tests of the lignin biofuel were carried out with a 150 kW powder burner and a 12 MW circulating fluidized bed (CFB) boiler. Lignin powder could be fired in a powder burner with good combustion performance after some trimming of the air flows to reduce swirl. Lignin dried to 10% moisture content was easy to feed smoothly and had less bridging tendencies in the feeding system than did wood/bark powder. In the CFB boiler, lignin was easily handled and cofired together with bark. Although the filter cake was broken into smaller pieces and fines, the combustion was not disturbed. When cofiring lignin with bark, the sulfur emission increased compared with bark firing only, but most of the sulfur was captured by calcium in the bark ash. Conventional sulfur capture also occurred with addition of limestone to the bed. The sulfur content in the lignin had a significantly positive effect on reducing the alkali chloride content in the deposits, thus reducing the high temperature corrosion risk.

NATO adaptation to current challenges and mechanisms of Ukraine’s cooperation with the North Atlantic Treaty Organization

2019 ◽  
pp. 73-81
Author(s):  
Oleh Poshedin
Keyword(s):  
North Atlantic ◽  
Task Force ◽  
Response Force ◽  
Cyber Attack ◽  
Adaptation Measures ◽  
Joint Force ◽  
Security Environment ◽  
The North ◽  
The North Atlantic ◽  
Area Of Influence

The purpose of the article is to describe the changes NATO undergoing in response to the challenges of our time. Today NATO, as a key element of European and Euro-Atlantic security, is adapting to changes in the modern security environment by increasing its readiness and ability to respond to any threat. Adaptation measures include the components required to ensure that the Alliance can fully address the security challenges it might face. Responsiveness NATO Response Force enhanced by developing force packages that are able to move rapidly and respond to potential challenges and threats. As part of it, was established a Very High Readiness Joint Task Force, a new Allied joint force that deploy within a few days to respond to challenges that arise, particularly at the periphery of NATO’s territory. NATO emphasizes, that cyber defence is part of NATO’s core task of collective defence. A decision as to when a cyber attack would lead to the invocation of Article 5 would be taken by the North Atlantic Council on a case-by-case basis. Cooperation with NATO already contributes to the implementation of national security and defense in state policy. At the same time, taking into account that all decision-making in NATO based on consensus, Ukraine’s membership in the Alliance quite vague perspective. In such circumstances, in Ukraine you often can hear the idea of announcement of a neutral status. It is worth reminding that non-aligned status did not save Ukraine from Russian aggression. Neutral status will not accomplish it either. All talks about neutrality and the impossibility of Ukraine joining NATO are nothing but manipulations, as well as recognition of the Ukrainian territory as Russian Federation area of influence (this country seeks to sabotage the Euro-Atlantic movement of Ukraine). Think about it, Moldova’s Neutrality is enshrined in the country’s Constitution since 1994. However, this did not help Moldova to restore its territorial integrity and to force Russia to withdraw its troops and armaments from Transnistria.

Characterization of Impressed Current Technique to Model Corrosion of Reinforcement in Concrete

2020 ◽  
Vol 11 (1) ◽  
pp. 93-99
Author(s):  
Abu Zakir Morshed ◽  
Sheikh Shakib ◽  
Tanzim Jahin
Keyword(s):  
Immersion Time ◽  
Chloride Content ◽  
Engineering Science ◽  
Coastal Regions ◽  
Faraday’S Law ◽  
Current Technique ◽  
Corrosion Cell ◽  
Impressed Current

Corrosion of reinforcement is an important durability concern for the structures exposed to coastal regions. Since corrosion of reinforcement involves long periods of time, impressed current technique is usually used to accelerate the corrosion of reinforcement in laboratories. Characterization of impressed current technique was the main focus of this research,which involved determination of optimum chloride content and minimum immersion time of specimens for which the application of Faraday’s law could be efficient. To obtain optimum chloride content, the electrolytes in the corrosion cell were prepared similar to that of concrete pore solutions. Concrete prisms of 200 mm by 200 mm by 300 mm were used to determine the minimum immersion time for saturation. It was found that the optimum chloride content was 35 gm/L and the minimum immersion time for saturation was 140 hours. Accounting the results, a modified expression based on Faraday’s law was proposed to calculate weight loss due to corrosion. Journal of Engineering Science 11(1), 2020, 93-99

Evaluation of hydrogeomechanical risks for mining operations in the area of influence of floor operations

2020 ◽  
pp. 190-202
Author(s):  
I.А. Sadovenko ◽  
◽  
V.I. Tymoshchuk ◽  
A.N. Zahrytsenko ◽  
N.I. Dereviahina ◽  
...  
Keyword(s):  
Mining Operations ◽  
Area Of Influence
Sign in / Sign up

Export Citation Format

Share Document