scholarly journals Finite Element Modeling of Axially Loaded CFRP-Confined Rectangular Reinforced Concrete Columns

2016 ◽  
Vol 2 (8) ◽  
pp. 414-425 ◽  
Author(s):  
Hamed Akbarpour ◽  
Masoumeh Akbarpour
Keyword(s):  
Compressive Strength ◽  
Ultimate Strength ◽  
Fiber Orientation ◽  
Concrete Strength ◽  
High Strength ◽  
Concrete Columns ◽  
Fiber Reinforced Polymer ◽  
Strength Concrete ◽  
Reinforced Polymer ◽  
Number Of Layers

This paper investigates numerically the behaviour of rectangular RC columns strengthened with carbon fiber reinforced polymer (CFRP) composites under uniaxial loading. For this a reason, a parametric study is conducted and the effects of CFRP layers number, compressive strength of unconfined concrete, and fiber orientation on the behaviour of such columns have been studied. The number of CFRP layers has been changed from one to five layers while the fibers are oriented transversely. Compressive strength of unconfined concrete has been increased from 26 MPa to 45 MPa. In addition, three different fiber orientations are considered. The results show that an increase in the number of CFRP layers would enhance the ultimate strength of specimens. Although increasing the number of layers would not increase the ultimate strength of specimens exponentially, but the rate of strength gain would also decrease. Moreover, it is shown that lateral strains increase as the layer number increases. The effect of unconfined concrete strength on the ultimate strength is less for low strength concrete than high strength concrete. Evaluating the effect of fiber orientation shows that the maximum ultimate strength is obtained from transverse orientation and as the angle of orientation increases, the ultimate strength decreases.

A Simple Design-Oriented Model for FRP-Confined High-Strength Concrete

2013 ◽  
Vol 743 ◽  
pp. 45-49
Author(s):  
Jian Chin Lim ◽  
Togay Ozbakkloglu
Keyword(s):  
High Strength Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Fiber Reinforced Polymer ◽  
Simple Design ◽  
Compressive Behavior ◽  
Strength Concrete ◽  
Strength Enhancement ◽  
Reinforced Polymer ◽  
Test Database

This paper presents a study on the axial compressive behavior of fiber reinforced polymer (FRP)-confined high-strength concrete (HSC). A large experimental test database assembled from the published literature was used to investigate and quantify factors influencing the compressive behavior of FRP-confined HSC. The database consisted of 976 test data having unconfined concrete strength ranging from 6.2 to 169.7MPa. Based on the analysis results of the database, it was found that the threshold confinement stiffness increases significantly with an increase in concrete strength, which in turn adversely affects the strength enhancement of confined concrete. It was also observed that the hoop rupture strain of FRP shell decreases with an increase in concrete strength. Existing confinement models that are applicable to FRP-confined HSC were assessed using the database. Finally, a new simple design-oriented model for FRP-confined HSC developed on the basis of the database is presented.

scholarly journals BEHAVIOUR OF HIGH-STRENGTH CONCRETE CIRCULAR COLUMNS CONFINED BY HIGH-STRENGTH SPIRALS UNDER CONCENTRIC COMPRESSION

2020 ◽  
Vol 26 (6) ◽  
pp. 564-578
Author(s):  
Chongchi Hou ◽  
Wenzhong Zheng ◽  
Wei Chang
Keyword(s):  
Compressive Strength ◽  
High Strength Concrete ◽  
Concrete Strength ◽  
High Strength ◽  
Concrete Columns ◽  
Confined Concrete ◽  
Concrete Compressive Strength ◽  
Strength Concrete ◽  
Proposed Model ◽  
High Strength Concrete Columns

This paper tested the behaviour of 32 high-strength concrete columns confined by high-strength spirals under concentric compression. The test parameters included unconfined concrete compressive strength, spiral yield strength, volumetric ratio, and spiral spacing. The results showed that bulging and shear sliding were the two characteristic types of failure patterns of the thirty-two confined columns, depending on spiral spacing and concrete strength. Moreover, the spiral in most specimens did not yield at the confined concrete compressive strength. An analytical confinement model for high-strength concrete columns confined by high-strength spirals was proposed. In this proposed model, the calculated value of the spiral stress at the confined concrete compressive strength was used to calculate the feature points of the stressstrain curve. The proposed model showed good correlations with available experimental results of 64 columns.

Load-deformation Behaviour of Eccentrically Loaded SSTT-confined High Strength Concrete Columns

2015 ◽  
Vol 74 (4) ◽  
Author(s):  
Ma Chau Khun ◽  
Abdullah Zawawi Awang ◽  
Wahid Omar
Keyword(s):  
High Strength Concrete ◽  
Deformation Behaviour ◽  
High Strength ◽  
Concrete Columns ◽  
Fiber Reinforced Polymer ◽  
Capacity Enhancement ◽  
Strength Concrete ◽  
Reinforced Polymer ◽  
Concentric Loading ◽  
Future Work

The application of steel-straps confinement or better known as steel-strapping tensioning technique (SSTT) has been proven to be effective in increasing the strength and ductility of High-Strength Concrete (HSC) column comparable to Fiber-Reinforced Polymer (FRP).  However, most of the research of confined HSC column has mainly concentrated on concentric loading. In actual practical condition, most of the columns are subjected to eccentric loading. The scarcity of the experimental data for eccentric loaded confined HSC column has prevented the potential use of this type of structure element. In this paper, five HSC columns were tested. The specimens were SSTT-confined and tested with 25mm and 50 mm eccentric loading. The results show that SSTT confinement can increase the strength and deformability of high-strength concrete column, although the strain gradient reduces the confining efficiency. Therefore, smaller capacity enhancement factor should be used in eccentrically loaded SSTT-confined HSC columns compared to concentrically loaded columns. Furthermore, the non-linear theoretical model established in this study can be used for templates for future work on SSTT-confined HSC columns.

Loading Process Simulation of GFRP Tube Filled with Steel-Reinforced High-Strength Concrete Columns Subjected to Eccentric Compression

2011 ◽  
Vol 71-78 ◽  
pp. 4203-4206
Author(s):  
Le Zhou ◽  
Hong Tao Liu
Keyword(s):  
High Strength Concrete ◽  
Slenderness Ratio ◽  
Concrete Strength ◽  
High Strength ◽  
Concrete Columns ◽  
Composite Columns ◽  
Strength Concrete ◽  
Finite Strip Method ◽  
Eccentric Compression ◽  
High Strength Concrete Columns

For the further study of bearing compressive capacity of GFRP tube filled with SHC（steel-reinforced high-strength concrete）columns subjected to eccentric compression, and analysis its whole bearing compressive process under eccentric compression. Based on the flat section assumption finite strip method, the calculating program of bearing eccentric compressive capacity of GFRP tube filled with SHC columns is proposed according to existing retrofit theory and related technical procedures. The relation curves of load-deformation is gotten using this calculating program, at the same time it can get the effect curves of concrete strength, slenderness ratio, eccentricity and containing bone rate to load-deformation. Calculations show that the ultimate bearing compressive capacity of composite column decreases with the increase of slenderness ratio, and elastic stage of component curve gradually shortens and stiffness gradually loses; The ultimate bearing compressive capacity of composite columns decreases with the increase of eccentricity; component ductility improves; the ultimate bearing compressive capacity of composite columns increases with the increase of concrete strength. The calculated results agree well with the experimental results and this study provides a basis for practical design.

Experimental Studies on High Strength Concrete Beams Reinforced with Steel and GFRP Rebars

2012 ◽  
Vol 238 ◽  
pp. 669-673 ◽  
Author(s):  
Ying Hao Liu ◽  
Yong Yuan
Keyword(s):  
High Strength Concrete ◽  
Experimental Studies ◽  
High Strength ◽  
Fiber Reinforced Polymer ◽  
Structural Behavior ◽  
Strength Concrete ◽  
Reinforced Polymer ◽  
Glass Fiber Reinforced ◽  
Steel Rebars ◽  
Gfrp Rebars

The paper analyzes the structural behavior of high strength concrete (HSC) beams reinforced with hybrid glass fiber reinforced polymer (GFRP) and steel reinforcements. The analysis refers to HSC beams reinforced with GFRP rebars and steel rebars placed in different layers. Results of the experimental and theoretical investigation are represented and discussed. Significant features of the structural behavior regarding flexural strength, deflection, are pointed out.

Sign in / Sign up

Export Citation Format

Share Document