scholarly journals An Investigation of Local Site Effects Using Linear and Nonlinear analysis and Comparison Between Them

2016 ◽  
Vol 2 (4) ◽  
pp. 113-122 ◽  
Author(s):  
Ali Komak Panah ◽  
Aylin Nouri
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Earthquake Engineering ◽  
Shear Wave Velocity ◽  
Response Spectrum ◽  
Response Analysis ◽  
Site Classification ◽  
Ground Response Analysis ◽  
Soil Response ◽  
Design Response Spectrum

Recent code provisions for building and other structures (1994 and 1997 NEHRP provisions, 1997 UBC) have adopted new site classification. The new site classification system is based on average shear wave velocity to a depth of 30 m. when the shear wave velocity is not available; other soil properties such as undrained shear strength can be used. The study of propagation damages in various earthquakes illustrates the importance of the site effect on the ground seismic characteristics. From the point of the earthquake engineering view, the most important characteristics of the strong ground motion are amplitude, frequency content and duration. All of these properties have a significant effect on earthquake damage. The behavior of soils under cyclic loading is basically nonlinear and hysteretic. Ground response analysis is used to predict the movements of the ground and develop a design response spectrum in order to determine the dynamic stresses and strains and earthquake forces. The profile was studied by using various methods of soil response analysis and finally, the results were examined. In this paper, soil responses were examined by NERA, EERA software and the results compared with each other. Eventually, we concluded that the values obtained from the EERA are more than the value obtained from the NEERA software.

Estimation Study on Shear Wave Velocity of Seabed Using GRNN

2014 ◽  
Vol 580-583 ◽  
pp. 264-267
Author(s):  
Sheng Jie Di ◽  
Zhi Gang Shan ◽  
Xue Yong Xu
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Seismic Analysis ◽  
Site Response ◽  
Estimation Method ◽  
Response Analysis ◽  
Generalized Regression Neural Network ◽  
Engineering Practice ◽  
Site Classification

Characterization of the shear wave velocity of soils is an integral component of various seismic analysis, including site classification, hazard analysis, site response analysis, and soil-structure interaction. Shear wave velocity at offshore sites of the coastal regions can be measured by the suspension logging method according to the economic applicability. The study presents some methods for estimating the shear wave velocity profiles in the absence of site-specific shear wave velocity data. By applying generalized regression neural network (GRNN) for the estimation of in-situ shear wave velocity, it shows good performances. Therefore, this estimation method is worthy of being recommended in the later engineering practice.

Topographically-Derived Near-Surface Shear Wave Velocity Map for Pakistan

2017 ◽  
Vol 11 (02) ◽  
pp. 1650010 ◽  
Author(s):  
Saeed Zaman ◽  
Pennung Warnitchai
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Site Response ◽  
Response Analysis ◽  
Site Classification ◽  
Site Conditions ◽  
Data Set ◽  
Near Surface ◽  
Topographic Slope

Shear wave velocity ([Formula: see text]) through the uppermost subsurface (30 m) is usually considered an important parameter as it dictates the dynamic behavior of soil and also acts as an input parameter for site response analysis, seismic hazard analysis, and site classification. In majority of seismically active areas across the globe, especially in developing countries like Pakistan, the [Formula: see text] measurements are either not available or if available, they are very limited in number to develop a seismic site-conditions map. In the absence of proper geological studies and geotechnical investigation, the slope-derived method provides a simple solution to map the site-conditions. The current study presents the development of slope-derived [Formula: see text] map on the basis of a correlation between [Formula: see text] and topographic slope for active tectonic regions and its comparison with the [Formula: see text] values at various locations in Pakistan. The topographic slope is calculated from digital elevation model (CDEM) of the Shuttle Radar Topography Mission (SRTM) 30 arc-sec global topographic data set. The [Formula: see text] values comprise of directly available, values calculated/estimated from the standard penetration tests (SPTs [Formula: see text]-value) and primary waves at various locations in Pakistan. [Formula: see text] values at various parts/locations in Pakistan and values from the slope-derived [Formula: see text] map are found to be fairly comparable and based on these results for seismically active areas like Pakistan, slope-derived method can be applied for the first-order site-condition studies.

Effects of Site Classification on Empirical Correlation between Shear Wave Velocity and Standard Penetration Resistance for Soils

2013 ◽  
Vol 284-287 ◽  
pp. 1305-1310 ◽  
Author(s):  
Chee Ghuan Tan ◽  
Taksiah Abdul Majid ◽  
Kamar Shah Ariffin ◽  
Norazura Muhamad Bunnori
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Dynamic Property ◽  
Penetration Resistance ◽  
Empirical Correlation ◽  
Response Analysis ◽  
Site Classification ◽  
Seismic Engineering ◽  
Local Soil

In seismic engineering, the dynamic property of the soil is one of the most important aspects in ground response analysis. Dynamic property is significantly affected by local soil deposits. Shear wave velocity (Vs) of soil is one of the main parameters in determining the amplification factor on ground surface. It is not economically feasible to measure Vs for all sites. Therefore, a reliable empirical correlation between Vs and standard penetration resistance (Nspt) will be useful since Nspt data are easily obtainable in construction industry. This study aims to develop an empirical correlation between Vs and Nspt for all soils by considering the effect of site classification according to the Uniform Building Code. New empirical correlations for all soils are presented in this study and well compared with the previous study to evaluate prediction capability. Results show that site classification has a significant impact on the Vs estimation, and that the proposed correlations are the most appropriate for estimating the Vs profile in the studied area compared with existing correlations.

scholarly journals Empirical relationships of shear wave velocity, SPT-N value and vertical effective stress for different soils in Mashhad, Iran

2015 ◽  
Vol 58 (3) ◽  
Author(s):  
Azam Ghazi ◽  
Naser Hafezi Moghadas ◽  
Hosein Sadeghi ◽  
Mohamad Ghafoori ◽  
Gholam Reza Lashkaripur
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Effective Stress ◽  
Shear Wave Velocity ◽  
Response Analysis ◽  
Empirical Relationships ◽  
Data Set ◽  
Fine Grain ◽  
Geophysical Investigations ◽  
Vertical Effective Stress

<p>Shear wave velocity, V<sub>s</sub>, is one of the important input parameters in seismic response analysis of the ground. Various methods have been examined to measure the soil V<sub>s</sub> directly. Direct measurement of V<sub>s</sub> is time consuming and costly, therefore many researchers have been trying to update empirical relationships between V<sub>s</sub> and other geotechnical properties of soils such as SPT Blow count, SPT-N. In this study the existence of a statistical relationship between V<sub>s</sub>, SPT-N<sub>60 </sub>and vertical effective stress, signa<sub>nu</sub>´, is investigated. Data set we used in this study was gathered from geotechnical and geophysical investigations reports. The data have been extracted from more than 130 numbers of geotechnical boreholes from different parts of Mashhad city. In each borehole the V<sub>s</sub> has been measured by downhole method at two meter intervals. The SPT test also has performed at the same depth. Finally relationships were developed by regression analysis for gravels, sands and fine grain soils. The proposed relationships indicate that V<sub>s</sub> is strongly dependent on signa<sub>nu</sub>´. In this paper the effect of fine percent also is considered on the V<sub>s</sub> estimation.</p>

Multiscale Random Field-Based Shear Wave Velocity Mapping and Site Classification

Geo-Risk 2017 ◽  
2017 ◽  
Author(s):  
Wenxin Liu ◽  
Chaofeng Wang ◽  
Qiushi Chen ◽  
Guoxing Chen ◽  
C. Hsein Juang
Keyword(s):  
Random Field ◽  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Site Classification ◽  
Velocity Mapping

An Empirical Geotechnical Seismic Site Response Procedure

2001 ◽  
Vol 17 (1) ◽  
pp. 65-87 ◽  
Author(s):  
Adrián Rodríguez-Marek ◽  
Jonathan D. Bray ◽  
Norman A. Abrahamson
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Classification System ◽  
Soil Depth ◽  
Site Response ◽  
Dynamic Stiffness ◽  
Evaluation Procedure ◽  
Site Classification ◽  
Seismic Site Response

A simplified empirically based seismic site response evaluation procedure that includes measures of the dynamic stiffness of the surficial materials and the depth to bedrock as primary parameters is introduced. This geotechnical site classification scheme provides an alternative to geologic-based and shear wave velocity-based site classification schemes. The proposed scheme is used to analyze the ground motion data from the 1989 Loma Prieta and 1994 Northridge earthquakes. Period-dependent and intensity-dependent spectral acceleration amplification factors for different site conditions are presented. The proposed scheme results in a significant reduction in standard error when compared with a simpler “rock vs. soil” classification system. Moreover, results show that sites previously grouped as “rock” should be subdivided as competent rock sites and weathered soft rock/shallow stiff soil sites to reduce uncertainty in defining site-dependent ground motions. Results also show that soil depth is an important parameter in estimating seismic site response. The standard errors resulting from the proposed site classification system are comparable with those obtained using the more elaborate code-based average shear-wave velocity classification system.

scholarly journals A Comparative Study on the VS30 and N30 Based Seismic Site Classification in Kahramanmaras, Turkey

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Dalia Munaff Naji ◽  
Muge K. Akin ◽  
Ali Firat Cabalar
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Soil Structure ◽  
Site Response ◽  
Dead Sea ◽  
Site Classification ◽  
Earthquake Hazards ◽  
Class D ◽  
Average Shear

Assessment of seismic site classification (SSC) using either the average shear wave velocity (VS30) or the average SPT-N values (N30) for upper 30 m in soils is the simplest method to carry out various studies including site response and soil-structure interactions. Either the VS30- or the N30-based SSC maps designed according to the National Earthquake Hazards Reduction Program (NEHRP) classification system are effectively used to predict possible locations for future seismic events. The main goal of this study is to generate maps using the Geographic Information System (GIS) for the SSC in Kahramanmaras city, influenced by both East Anatolian Fault and Dead Sea Fault Zones, using both VS30 and N30 values. The study also presents a series of GIS maps produced using the shear wave velocity (VS) and SPT-N values at the depths of 5 m, 10 m, 15 m, 20 m, and 25 m. Furthermore, the study estimates the bed rock level and generates the SSC maps for the average VS values through overburden soils by using the NEHRP system. The VS30 maps categorize the study area mainly under class C and limited number of areas under classes B and D, whereas the N30 maps classify the study area mainly under class D. Both maps indicate that the soil classes in the study area are different to a high extent. Eventually, the GIS maps complied for the purpose of urban development may be utilized effectively by engineers in the field.

Sign in / Sign up

Export Citation Format

Share Document