scholarly journals Statistical Assessment of Hydraulic Properties of Unsaturated Soils

2016 ◽  
pp. 81-95
Author(s):  
Gilson de F. N. Gitirana ◽  
Delwyn G. Fredlund
Keyword(s):  
Hydraulic Conductivity ◽  
Soil Properties ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Hydraulic Properties ◽  
Characteristic Curve ◽  
Primary Objective ◽  
Soil Parameters ◽  
Statistical Assessment ◽  
Conductivity Function

The availability of statistical values for soil parameters is essential in reliability-based geotechnical design and sensitivity analysis. Unfortunately, there are few statistical studies available about unsaturated soil parameters. The primary objective of this paper is to present a methodology for the statistical assessment of hydraulic properties of unsaturated soil and to present the results of a statistical study carried out using a large database of soil properties. Two fundamental unsaturated soil properties are considered; namely, the soil-water characteristic curve (SWCC) and the hydraulic conductivity function. Appropriate nonlinear functions and fitting parameters with well-defined and unique physical and/or geometrical meanings were adopted. The main contribution of this article is the establishment of central tendency measures, standard deviations, and correlation coefficients for the unsaturated soil parameters, considering soil datasets grouped according to soil texture. It was determined based on the analyses results that the air-entry value, primary SWCC slope, residual SWCC slope, saturated hydraulic conductivity, and hydraulic conductivity function slope could be well described using lognormal probability density functions. Finally, general guidelines are provided regarding the statistical values to be adopted for the unsaturated soil properties studied.

Method for Quick Prediction of Hydraulic Conductivity and Soil-Water Retention of Unsaturated Soils

2018 ◽  
Vol 2672 (52) ◽  
pp. 108-117 ◽  
Author(s):  
Shaoyang Dong ◽  
Yuan Guo ◽  
Xiong (Bill) Yu
Keyword(s):  
Finite Element ◽  
Hydraulic Conductivity ◽  
Soil Properties ◽  
Soil Water ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Hydraulic Properties ◽  
Water Retention ◽  
Characteristic Curve ◽  
Soil Water Retention

Hydraulic conductivity and soil-water retention are two critical soil properties describing the fluid flow in unsaturated soils. Existing experimental procedures tend to be time consuming and labor intensive. This paper describes a heuristic approach that combines a limited number of experimental measurements with a computational model with random finite element to significantly accelerate the process. A microstructure-based model is established to describe unsaturated soils with distribution of phases based on their respective volumetric contents. The model is converted into a finite element model, in which the intrinsic hydraulic properties of each phase (soil particle, water, and air) are applied based on the microscopic structures. The bulk hydraulic properties are then determined based on discharge rate using Darcy’s law. The intrinsic permeability of each phase of soil is first calibrated from soil measured under dry and saturated conditions, which is then used to predict the hydraulic conductivities at different extents of saturation. The results match the experimental data closely. Mualem’s equation is applied to fit the pore size parameter based on the hydraulic conductivity. From these, the soil-water characteristic curve is predicted from van Genuchten’s equation. The simulation results are compared with the experimental results from documented studies, and excellent agreements were observed. Overall, this study provides a new modeling-based approach to predict the hydraulic conductivity function and soil-water characteristic curve of unsaturated soils based on measurement at complete dry or completely saturated conditions. An efficient way to measure these critical unsaturated soil properties will be of benefit in introducing unsaturated soil mechanics into engineering practice.

The relationship of the unsaturated soil shear strength to the soil-water characteristic curve

1996 ◽  
Vol 33 (3) ◽  
pp. 440-448 ◽  
Author(s):  
D G Fredlund ◽  
Anqing Xing ◽  
M D Fredlund ◽  
S L Barbour
Keyword(s):  
Shear Strength ◽  
Prediction Model ◽  
Soil Water ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Characteristic Curve ◽  
Strength Function ◽  
Soil Parameters ◽  
Angle Of Internal Friction ◽  
Soil Water Characteristic Curve

The measurement of soil parameters, such as the permeability and shear strength functions, used to describe unsaturate soil behaviour can be expensive, difficult, and often impractical to obtain. This paper proposes a model for predicting the shear strength (versus matric suction) function of unsaturated soils. The prediction model uses the soil-water characteristic curve and the shear strength parameters of the saturated soil (i.e., effective cohesion and effective angle of internal friction). Once a reasonable estimate of the soil-water characteristic curve is obtained, satisfactory predictions of the shear strength function can be made for the unsaturated soil. Closed-form solutions for the shear strength function of unsaturated soils are obtained for cases where a simple soil-water characteristic equation is used in the prediction model. Key words: soil suction, soil-water characteristic curve, shear strength function, unsaturated soil.

Soil Strength Reduction Method Induced by Variation of Water Content

2012 ◽  
Vol 170-173 ◽  
pp. 847-852
Author(s):  
Peng Ming Jiang ◽  
Zhong Lei Yan ◽  
Peng Li
Keyword(s):  
Slope Stability ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Characteristic Curve ◽  
Strength Reduction ◽  
Actual State ◽  
Soil Slope ◽  
Simple Method ◽  
The Common ◽  
The Stability

As the complexity of unsaturated soil theory, and it must have a long test period when we study the unsaturated soils, so the conventional design analysis software does not provide such analysis, so we can imagine that such a slope stability analysis does not accurately reflect the actual state of the slope. Based on the known soil moisture content，this paper use the soil water characteristic curve and strength theory of unsaturated soil to calculate the strength reduction parameters of soil which can calculate the stability of the soil slope when using the common calculation method. It is noticeable that this method can be extended and applied if we establish regional databases for this simple method, and these databases can improve the accuracy of the calculation of slope stability.

scholarly journals Use of field and laboratory methods for estimating unsaturated hydraulic properties under different land uses

2015 ◽  
Vol 19 (3) ◽  
pp. 1193-1207 ◽  
Author(s):  
S. Siltecho ◽  
C. Hammecker ◽  
V. Sriboonlue ◽  
C. Clermont-Dauphin ◽  
V. Trelo-ges ◽  
...  
Keyword(s):  
Land Use ◽  
Unsaturated Soil ◽  
Hydraulic Properties ◽  
Rubber Tree ◽  
Measurement Methods ◽  
Soil Parameters ◽  
Forest Site ◽  
Land Uses ◽  
Soil Hydraulic Properties ◽  
Soil Hydraulic

Abstract. Adequate water management is required to improve the efficiency and sustainability of agricultural systems when water is scarce or over-abundant, especially in the case of land use changes. In order to quantify, to predict and eventually to control water and solute transport into soil, soil hydraulic properties need to be determined precisely. As their determination is often tedious, expensive and time-consuming, many alternative field and laboratory techniques are now available. The aim of this study was to determine unsaturated soil hydraulic properties under different land uses and to compare the results obtained with different measurement methods (Beerkan, disc infiltrometer, evaporation, pedotransfer function). The study has been realized on a tropical sandy soil in a mini-watershed in northeastern Thailand. The experimental plots were positioned in a rubber tree plantation in different positions along a slope, in ruzi grass pasture and in an original forest site. Non-parametric statistics demonstrated that van Genuchten unsaturated soil parameters (Ks, α and n) were significantly different according to the measurement methods employed, whereas the land use was not a significant discriminating factor when all methods were considered together. However, within each method, parameters n and α were statistically different according to the sites. These parameters were used with Hydrus1D for a 1-year simulation and computed pressure head did not show noticeable differences for the various sets of parameters, highlighting the fact that for modeling, any of these measurement methods could be employed. The choice of the measurement method would therefore be motivated by the simplicity, robustness and its low cost.

A UNIFIED FRACTAL MODEL FOR PERMEABILITY COEFFICIENT OF UNSATURATED SOIL

Fractals ◽  
2019 ◽  
Vol 27 (01) ◽  
pp. 1940012 ◽  
Author(s):  
GAOLIANG TAO ◽  
XIAOKANG WU ◽  
HENGLIN XIAO ◽  
QINGSHENG CHEN ◽  
JIANCHAO CAI
Keyword(s):  
Relative Permeability ◽  
Unsaturated Soil ◽  
Permeability Coefficient ◽  
Unsaturated Soils ◽  
Fractal Theory ◽  
Characteristic Curve ◽  
Fractal Model ◽  
Computational Effort ◽  
Model Parameters ◽  
Mechanical Coupling

Due to the significant challenges in the measurements, evaluation of permeability coefficient for unsaturated soil is of immense importance for investigating the seepage and hydro-mechanical coupling problems of unsaturated soil. However, the predictions of existing typical models reveal significance divergence for permeability coefficient of unsaturated soils even under identical conditions. In particular, the existing models are greatly restricted in their practical application due to their complexity in the form of integral expressions that require significant computational effort. Here, a simplified unified model is presented to estimate the relative permeability coefficient. First, a fractal-form of soil–water characteristic curve (SWCC) is derived from fractal theory. Then, on the basis of the proposed SWCC models, the classical models (i.e. Childs and Collis-George (CCG) model, Burdine model, Mualem model and Tao and Kong model, respectively) for evaluating the permeability coefficient of unsaturated soil are converted to be presented in fractal forms. It is interestingly found that the fractal forms of these models are enormously similar. Based on these observations, a simplified unified fractal model for the relative permeability coefficient of unsaturated soil is proposed, where only two parameters (i.e. fractal dimension and air-entry value) are included, thereby significantly reducing the computational efforts. The detailed procedure for determining model parameters is elaborated. The accuracy of this model is verified by comparing its predictions with the experimental data for over 12 types of unsaturated soils. The results highlight that, compared with existing models, the proposed model would be much more efficiently used for estimating the relative permeability coefficient of unsaturated soils, thereby facilitating its application for investigating the associated seepage and hydro-mechanical coupling problems in practice.

Estimation of hydraulic conductivity of unsaturated soils using a geotechnical centrifuge

2002 ◽  
Vol 39 (3) ◽  
pp. 684-694 ◽  
Author(s):  
D N Singh ◽  
Sneha J Kuriyan
Keyword(s):  
Hydraulic Conductivity ◽  
Water Content ◽  
Soil Sample ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Soil Hydraulic Conductivity ◽  
Centrifuge Testing ◽  
Geotechnical Centrifuge ◽  
Silty Soil ◽  
Unsaturated Hydraulic Conductivity

A saturated silty soil sample is centrifuged in a geotechnical centrifuge to create an unsaturated state. The change in water content of the soil sample is recorded at different points along the length of the sample to obtain the water-content profile, which is then used to obtain the unsaturated hydraulic conductivity of the soil sample. These hydraulic conductivity values are compared with those obtained and reported by previous researchers by conducting accelerated falling-head tests on this soil sample in a centrifuge. The study demonstrates the use of centrifugation techniques to obtain hydraulic conductivities of unsaturated soils.Key words: silty soil, saturated soil, unsaturated soil, hydraulic conductivity, centrifuge testing.

scholarly journals Prediction of soil water characteristic curve using artificial neural network: a new approach

2018 ◽  
Vol 162 ◽  
pp. 01014
Author(s):  
Abdul-Kareem Esmat Zainal ◽  
Shaimaa Hasan Fadhil
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Soil Properties ◽  
Soil Water ◽  
Unsaturated Soil ◽  
Characteristic Curve ◽  
New Approach ◽  
Soil Water Characteristic Curve ◽  
Important Relationship ◽  
Artificial Neural

Soil-Water Characteristic Curve (SWCC) is an important relationship between matric suction and volumetric water content of soils especially when dealing with unsaturated soil problems, these problems may include seepage, bearing capacity, volume change, etc. where the matric or total suction may have a considerable effect on unsaturated soil properties. Obtaining an accurate SWCC for a soil could be cumbersome and sometimes it is time consuming and needs effort for some soils, either through laboratory tests or through field tests. Accurate prediction of this curve can give more precise expectations in design or analysis that include some unsaturated soil properties, which can save more effort and time. This work will concentrate on proposing a new approach for determining the SWCC using Artificial Neural Network (ANN) depending on some soil properties (air-entry point and residual degree of saturation) through computer software MatLab as a tool for ANN. The new approach is to plot the SWCC curve points instead of obtaining the parameters used in Brooks and Corey (BC) Model (1964), van Genuchten (VG) Model (1980), or Fredlund and Xing (FX) Model (1994). Results showed close agreement in determination of the SWCC by verification of the ANN results with an additional curve sample.

scholarly journals Further tests of the HYPROP evaporation method for estimating the unsaturated soil hydraulic properties

2018 ◽  
Vol 66 (2) ◽  
pp. 161-169 ◽  
Author(s):  
Camila R. Bezerra-Coelho ◽  
Luwen Zhuang ◽  
Maria C. Barbosa ◽  
Miguel Alfaro Soto ◽  
Martinus Th. van Genuchten
Keyword(s):  
Hydraulic Conductivity ◽  
Unsaturated Soil ◽  
Hydraulic Properties ◽  
Water Retention ◽  
Measurement Techniques ◽  
Richards Equation ◽  
Water Retention Curve ◽  
Soil Hydraulic Properties ◽  
Evaporation Method ◽  
Soil Hydraulic

AbstractMany soil, hydrologic and environmental applications require information about the unsaturated soil hydraulic properties. The evaporation method has long been used for estimating the drying branches of the soil hydraulic functions. An increasingly popular version of the evaporation method is the semi-automated HYPROP©measurement system (HMS) commercialized by Decagon Devices (Pullman, WA) and UMS AG (München, Germany). Several studies were previously carried out to test the HMS methodology by using the Richards equation and the van-Genuchten-Mualem (VG) or Kosugi-Mualem soil hydraulic functions to obtain synthetic data for use in the HMS analysis, and then to compare results against the original hydraulic properties. Using HYDRUS-1D, we carried out independent tests of the HYPROP system as applied to the VG functions for a broad range of soil textures. Our results closely agreed with previous findings. Accurate estimates were especially obtained for the soil water retention curve and its parameters, at least over the range of available retention measurements. We also successfully tested a dual-porosity soil, as well as an extremely coarse medium with a very high van Genuchtennvalue. The latter case gave excellent results for water retention, but failed for the hydraulic conductivity. In many cases, especially for soils with intermediate and highnvalues, an independent estimate of the saturated hydraulic conductivity should be obtained. Overall, the HMS methodology performed extremely well and as such constitutes a much-needed addition to current soil hydraulic measurement techniques.

Model for the prediction of shear strength with respect to soil suction

1996 ◽  
Vol 33 (3) ◽  
pp. 379-392 ◽  
Author(s):  
S K Vanapalli ◽  
D G Fredlund ◽  
D E Pufahl ◽  
A W Clifton
Keyword(s):  
Shear Strength ◽  
Soil Water ◽  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Characteristic Curve ◽  
Experimental Studies ◽  
Matric Suction ◽  
Glacial Till ◽  
Soil Suction ◽  
Soil Water Characteristic Curve

Experimental studies on unsaturated soils are generally costly, time-consuming, and difficult to conduct. Shear strength data from the research literature suggests that there is a nonlinear increase in strength as the soil desaturates as a result of an increase in matric suction. Since the shear strength of an unsaturated soil is strongly related to the amount of water in the voids of the soil, and therefore to matric suction, it is postulated that the shear strength of an unsaturated soil should also bear a relationship to the soil-water characteristic curve. This paper describes the relationship between the soil-water characteristic curve and the shear strength of an unsaturated soil with respect to matric suction. Am empirical, analytical model is developed to predict the shear strength in terms of soil suction. The formulation makes use of the soil-water characteristic curve and the saturated shear strength parameters. The results of the model developed for predicting the shear strength are compared with experimental results for a glacial till. The shear strength of statically compacted glacial till specimens was measured using a modified direct shear apparatus. Specimens were prepared at three different water contents and densities (i.e., corresponding to dry of optimum, and wet of optimum conditions). Various net normal stresses and matric suctions were applied to the specimens. There is a good correlation between the predicted and measured values of shear strength for the unsaturated soil. Key words: soil-water characteristic curve, shear strength, unsaturated soil, soil suction, matric suction.

Sign in / Sign up

Export Citation Format

Share Document