scholarly journals DEVELOPMENT OF ELECTROCHEMICAL SENSORS FOR QUANTITATIVE ANALYSIS OF METHYLDOPA AT MODIFIED-GCE AND PGE ELECTRODES BY VOLTAMMETRY

2020 ◽  
Vol 4 (4) ◽  
pp. 223-236
Author(s):  
Suzan YANIK ◽  
Saliha B. KURT ◽  
Betul ARI ◽  
Sahin DEMIRCI ◽  
Selehattin YILMAZ
Keyword(s):  
Glassy Carbon ◽  
Sulfonic Acid ◽  
Electrochemical Sensors ◽  
Limit Of Detection ◽  
Modified Electrodes ◽  
Differential Pulse ◽  
Electrochemical Methods ◽  
Limit Of Quantification ◽  
Spectrophotometric Methods ◽  
Concentration Graphs

Methyldopa is one of the important drugs used in the treatment of high blood pressure (hypertension). In addition to various methods such as chromatographic and spectrophotometric methods, electrochemical methods are used for the determination of methyldopa. However, poly (p-aminobenzene sulfonic acid), pen-tip graphite electrode (PGE) study was not found in the literature search. Modified electrodes are important because they increase the sensitivity of the analysis. Furthermore, electrochemical methods have advantages such as being faster and cheaper than other instrumental analysis methods, being more sensitive, not requiring long pretreatments in the preparation of samples. In this study, the glassy carbon electrode (GCE) was modified with poly(p-aminobenzene sulfonic acid) to prepare poly (p-aminobenzene sulfonic acid) -modified glassy carbon electrodes. Cyclic voltammetry (CV) technique was used for the electropolymerization process. Methyldopa was selected in various concentrations of phosphate pH 7.40 buffer, anodic and cathodic voltamograms were taken and oxidation and reduction properties were investigated. Measurements were taken at different scanning rates by CV technique and the current type of methyldopa was determined. Peak flow-concentration graphs were drawn from the measurements taken by Differential Pulse Voltammetry (DPV) technique and the linearity range was 0.020- 2.500 µM for modified-GCE and 0.020-2.820 µM for PGE. The limit of detection (LOD) was calculated as 0.006 µM for modified-GCE, 0.012 µM for PGE. The limit of quantification (LOQ) was calculated as 0.020 µM for modified-GCE and 0.040 µM for PGE.

scholarly journals Electrochemical Detection of Endosulfan Using an AONP-PANI-SWCNT Modified Glassy Carbon Electrode

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 723
Author(s):  
Kgotla K. Masibi ◽  
Omolola E. Fayemi ◽  
Abolanle S. Adekunle ◽  
Amal M. Al-Mohaimeed ◽  
Asmaa M. Fahim ◽  
...  
Keyword(s):  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Limit Of Detection ◽  
Modified Electrodes ◽  
Antimony Oxide ◽  
Current Response ◽  
Carbon Electrode ◽  
Trace Detection ◽  
Limit Of Quantification ◽  
Walled Carbon Nanotubes

This report narrates the successful application of a fabricated novel sensor for the trace detection of endosulfan (EDS). The sensor was made by modifying a glassy-carbon electrode (GCE) with polyaniline (PANI), chemically synthesized antimony oxide nanoparticles (AONPs), acid-functionalized, single-walled carbon nanotubes (fSWCNTs), and finally, the AONP-PANI-SWCNT nanocomposite. The electrochemical properties of the modified electrodes regarding endosulfan detection were investigated via cyclic voltammetry (CV) and square-wave voltammetry. The current response of the electrodes to EDS followed the trend GCE-AONP-PANI-SWCNT (−510 µA) > GCE-PANI (−59 µA) > GCE-AONPs (−11.4 µA) > GCE (−5.52 µA) > GCE-fSWCNTs (−0.168 µA). The obtained results indicated that the current response obtained at the AONP-PANI-SWCNT/GCE was higher with relatively low overpotential compared to those from the other electrodes investigated. This demonstrated the superiority of the AONP-PANI-SWCNT-modified GCE. The AONP-PANI-SWCNT/GCE demonstrated good electrocatalytic activities for the electrochemical reduction of EDS. The results obtained in this study are comparable with those in other reports. The sensitivity, limit of detection (LoD), and limit of quantification (LoQ) of AONP-PANI-SWCNT/GCE towards EDS was estimated to be 0.0623 µA/µM, 6.8 µM, and 20.6 µM, respectively. Selectivity, as well as the practical application of the fabricated sensor, were explored, and the results indicated that the EDS-reduction current was reduced by only 2.0% when interfering species were present, whilst average recoveries of EDS in real samples were above 97%.

scholarly journals Electrochemical determination of acetaminophen at a carbon electrode modified in the presence of β-cyclodextrin: role of the activated glassy carbon and the electropolymerised β-cyclodextrin

2021 ◽  
Author(s):  
Bronach Healy ◽  
Francesco Rizzuto ◽  
Marida de Rose ◽  
Tian Yu ◽  
Carmel B. Breslin
Keyword(s):  
Glassy Carbon ◽  
Electrochemical Sensors ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Electrochemical Determination ◽  
Phosphate Solution ◽  
Carbon Electrode ◽  
Provide Pain Relief ◽  
High Concentrations

AbstractAcetaminophen is a well-known drug commonly used to provide pain relief, but it can also lead to acute liver failure at high concentrations. Therefore, there is considerable interest in monitoring its concentrations. Sensitive and selective acetaminophen electrochemical sensors were designed by cycling a glassy carbon electrode (GCE) to high potentials in the presence of β-CD in a phosphate electrolyte, or by simply activating the GCE electrode in the phosphate solution. Using cyclic voltammetry, adsorption-like voltammograms were recorded. The acetaminophen oxidation product, N-acetyl benzoquinone imine, was protected from hydrolysis, and this was attributed to the adsorption of acetaminophen at the modified GCE. The rate constants for the oxidation of acetaminophen were estimated as 4.3 × 10–3 cm2 s–1 and 3.4 × 10–3 cm2 s–1 for the β-CD-modified and -activated electrodes, respectively. Using differential pulse voltammetry, the limit of detection was calculated as 9.7 × 10–8 M with a linear concentration range extending from 0.1 to 80 μM. Furthermore, good selectivity was achieved in the presence of caffeine, ascorbic acid and aspirin, enabling the determination of acetaminophen in a commercial tablet. Similar electrochemical data were obtained for both the β-CD-modified and activated GCE surfaces, suggesting that the enhanced detection of acetaminophen is connected mainly to the activation and oxidation of the GCE. Using SEM, EDX and FTIR, no evidence was obtained to indicate that the β-CD was electropolymerised at the GCE.

Electroanalysis of Catecholamine Drugs using Graphene Modified Electrodes

2019 ◽  
Vol 15 (4) ◽  
pp. 443-466 ◽  
Author(s):  
Mahya Karami Mosammam ◽  
Mohammad Reza Ganjali ◽  
Mona Habibi-Kool-Gheshlaghi ◽  
Farnoush Faridbod
Keyword(s):  
Electrochemical Sensors ◽  
Modified Electrodes ◽  
Electrochemical Methods ◽  
High Signal ◽  
Signal To Noise ◽  
Low Level ◽  
Biological Studies

Background: Catecholamine drugs are a family of electroactive pharmaceutics, which are widely analyzed through electrochemical methods. However, for low level online determination and monitoring of these compounds, which is very important for clinical and biological studies, modified electrodes having high signal to noise ratios are needed. Numerous materials including nanomaterials have been widely used as electrode modifies for these families during the years. Among them, graphene and its family, due to their remarkable properties in electrochemistry, were extensively used in modification of electrochemical sensors. Objective: In this review, working electrodes which have been modified with graphene and its derivatives and applied for electroanalyses of some important catecholamine drugs are considered.

scholarly journals Simultaneous electrochemical sensing of dihydroxy benzene isomers at cost-effective allura red polymeric film modified glassy carbon electrode

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Pattan-Siddappa Ganesh ◽  
Ganesh Shimoga ◽  
Seok-Han Lee ◽  
Sang-Youn Kim ◽  
Eno E. Ebenso
Keyword(s):  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Limit Of Detection ◽  
Tap Water ◽  
Differential Pulse ◽  
Oxidation Potential ◽  
Electrochemical Sensing ◽  
Carbon Electrode ◽  
Buffer Solution ◽  
Allura Red

Abstract Background A simple and simultaneous electrochemical sensing platform was fabricated by electropolymerization of allura red on glassy carbon electrode (GCE) for the interference-free detection of dihydroxy benzene isomers. Methods The modified working electrode was characterized by electrochemical and field emission scanning electron microscopy methods. The modified electrode showed excellent electrocatalytic activity for the electrooxidation of catechol (CC) and hydroquinone (HQ) at physiological pH of 7.4 by cyclic voltammetric (CV) and differential pulse voltammetric (DPV) techniques. Results The effective split in the overlapped oxidation signal of CC and HQ was achieved in a binary mixture with peak to peak separation of 0.102 V and 0.103 V by CV and DPV techniques. The electrode kinetics was found to be adsorption-controlled. The oxidation potential directly depends on the pH of the buffer solution, and it witnessed the transfer of equal number of protons and electrons in the redox phenomenon. Conclusions The limit of detection (LOD) for CC and HQ was calculated to be 0.126 μM and 0.132 μM in the linear range of 0 to 80.0 μM and 0 to 110.0 μM, respectively, by ultra-sensitive DPV technique. The practical applicability of the proposed sensor was evaluated for tap water sample analysis, and good recovery rates were observed. Graphical abstract Electrocatalytic interaction of ALR/GCE with dihydroxy benzene isomers.

scholarly journals Surface-Enhanced Oxidation and Determination of Isothipendyl Hydrochloride at an Electrochemical Sensing Film Constructed by Multiwalled Carbon Nanotubes

2012 ◽  
Vol 2012 ◽  
pp. 1-6
Author(s):  
S. N. Prashanth ◽  
Shankara S. Kalanur ◽  
Nagappa L. Teradal ◽  
J. Seetharamappa
Keyword(s):  
Limit Of Detection ◽  
Biological Fluids ◽  
Differential Pulse ◽  
Electrochemical Sensing ◽  
Good Precision ◽  
Multiwalled Carbon ◽  
Limit Of Quantification ◽  
Surface Enhanced ◽  
Ph Range

The electrochemical behavior of isothipendyl hydrochloride (IPH) was investigated at bare and multiwalled-carbon-nanotube modified glassy carbon electrode (MWCNT-GCE). IPH (55 μM) showed two oxidation peaks in Britton-Robinson (BR) buffer of pH 7.0. The oxidation process of IPH was observed to be irreversible over the pH range of 2.5–9.0. The influence of pH, scan rate, and concentration of the drug on anodic peak was studied. A differential pulse voltammetric method with good precision and accuracy was developed for the determination of IPH in pure and biological fluids. The peak current was found to be linearly dependent on the concentration of IPH in the range of 1.25–55 μM. The values of limit of detection and limit of quantification were noticed to be 0.284 and 0.949 μM, respectively.

scholarly journals Supramolecular assemblies of carbon nanocoils and tetraphenylporphyrin derivatives for sensing of catechol and hydroquinone in aqueous solution

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Syeda Aqsa Batool Bukhari ◽  
Habib Nasir ◽  
Lujun Pan ◽  
Mehroz Tasawar ◽  
Manzar Sohail ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Linear Trend ◽  
Differential Pulse ◽  
Peak Potential ◽  
Limit Of Quantification ◽  
Efficient Detection ◽  
Good Repeatability ◽  
Ft Ir ◽  
Pulse Voltammetry

AbstractNon-enzymatic electrochemical detection of catechol (CC) and hydroquinone (HQ), the xenobiotic pollutants, was carried out at the surface of novel carbon nanocoils/zinc-tetraphenylporphyrin (CNCs/Zn-TPP) nanocomposite supported on glassy carbon electrode. The synergistic effect of chemoresponsive activity of Zn-TPP and a large surface area and electron transfer ability of CNCs lead to efficient detection of CC and HQ. The nanocomposite was characterized by using FT-IR, UV/vis. spectrophotometer, SEM and energy dispersive X-ray spectroscopy (EDS). Cyclic voltammetry, differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy were used for the electrochemical studies. CNCs/Zn-TPP/GCE nanosensor displayed a limit of detection (LOD), limit of quantification (LOQ) and sensitivity for catechol as 0.9 µM, 3.1 µM and 0.48 µA µM−1 cm−2, respectively in a concentration range of 25–1500 µM. Similarly, a linear trend in the concentration of hydroquinone detection was observed between 25 and 1500 µM with an LOD, LOQ and sensitivity of 1.5 µM, 5.1 µM and 0.35 µA µM−1 cm−2, respectively. DPV of binary mixture pictured well resolved peaks with anodic peak potential difference, ∆Epa(CC-HQ), of 110 mV showing efficient sensing of CC and HQ. The developed nanosensor exhibits stability for up to 30 days, better selectivity and good repeatability for eight measurements (4.5% for CC and 5.4% for HQ).

Method Development and Validation of Spectrophotometric Methods for The Estimation of Rizatriptan Benzoate in Pure and Pharmaceutical Dosage Form

2021 ◽  
pp. 6003-6006
Author(s):  
Pushpa Latha E. ◽  
Sailaja B.
Keyword(s):  
Dosage Form ◽  
Method Development ◽  
Limit Of Detection ◽  
Limit Of Quantification ◽  
Pharmaceutical Dosage Form ◽  
Rizatriptan Benzoate ◽  
Spectrophotometric Methods ◽  
Ich Guidelines ◽  
Development And Validation ◽  
Tablet Dosage

Analytical UV derivative spectrophotometric method was developed and validated to quantify Rizatriptan Benzoate in pure drug and tablet dosage form. Based on the spectrophotometric characteristics of Rizatriptan Benzoate, a signal of zero (225nm), first (216nm), second (237nm), third (233nm), fourth (231nm) order derivative spectra were found to be adequate for quantification. The methods obeyed Beer's law in the concentration range of (0.1-360µg/ml) with square correlation coefficient (r2) of 0.999. The mean percentage recovery was found to be 100.01 ± 0.075. As per ICH guidelines the results of the analysis were validated in terms of linearity, precision, accuracy, limit of detection and limit of quantification, and were found to be satisfactory.

Sensitive Determination of Epinephrine in the Presence of Ascorbic Acid at Poly(diphenylamine sulfonic acid) Modified Sensor

2020 ◽  
Vol 18 (4) ◽  
pp. 253-258
Author(s):  
Gamze Erdoğdu
Keyword(s):  
Ascorbic Acid ◽  
Sulfonic Acid ◽  
Limit Of Detection ◽  
Phosphate Buffer Solution ◽  
Differential Pulse ◽  
Buffer Solution ◽  
Sensitive Determination ◽  
Pulse Voltammetry ◽  
Modified Sensor

A sensitive and simple modified sensor was prepared by electrodeposition of diphenylamine sulfonic acid (DPSA) to the glassy carbon electrode surface by cyclic voltammetry (CV) technique. The electrooxidation of epinephrine (EP) was accomplished by CV and differential pulse voltammetry at poly(DPSA) modified sensor. As a result of the findings, the current values were enhanced and both substances were separated at the modified sensor compared to the bare electrode. There was linearly between the oxidation current and concentration of EP from 0.2 to 100 μM in phosphate buffer solution at pH 7.0. The limit of detection was 5.0 nM and the sensitivity was 0.4205 μA/μM. The determination of EP was successfully and satisfactorily carried out in real samples such as human blood serum and urine at the poly(DPSA) sensor. To the best knowledge of this work, this is the first study that detect the EP in the presence of ascorbic acid at poly(DPSA) sensor in the literature.

scholarly journals Electrodes Modification Based on Metal-Free Phthalocyanine: Example of Electrochemical Sensors for the Detection of Acetic Acid

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Amadou L. Ndiaye ◽  
Alain Pauly ◽  
Sebastien Delile ◽  
Jérôme Brunet ◽  
Christelle Varenne ◽  
...  
Keyword(s):  
Acetic Acid ◽  
Electrochemical Sensors ◽  
Limit Of Detection ◽  
Modified Electrodes ◽  
Reduction Peak ◽  
Metal Free ◽  
Signal Decay ◽  
A Value ◽  
Working Electrode ◽  
Deposition Techniques

Electroanalytical properties of tetra-tert-butyl phthalocyanine (PcH2-tBu) modified electrodes are studied by cyclic voltammetry (CV). The modified electrodes are obtained by CV deposition techniques on gold (Au) and glassy carbon (C) screen-printed electrodes (SPEs) and used for the electrochemical detection of acetic acid (AA). Based on the CV experiments, the electrodeposition mechanism is detailed. The modified PcH2-tBu electrodes reveal one oxidation and one reduction peak within the potential window of the working electrodes. In the presence of the analyte (acetic acid), the modified electrodes show sensitivity in the range of 10 mM to 400 mM. For the PcH2-tBu modified Au electrode, a limit of detection (LOD) of 5.89 mM (based on the +0.06 V peak) was obtained while for the PcH2-tBu modified C electrode a LOD of 17.76 mM (based on the +0.07 V peak) was achieved. A signal decay of 17%, based on 20 experiments, is obtained when gold is used as working electrode. If carbon is used as working electrode a value of 7% is attained. A signal decay is observed after more than 50 cycles of experiments and is more pronounced when higher concentrations of acetic acid are used. A mechanism of sensing is proposed at the end.

scholarly journals Magnetic and Mesoporous Silica-Niobia Material as Modifier of Carbon Paste Electrode for p-Nitrophenol Electrochemical Determination

2021 ◽  
Author(s):  
Oleg Tkachenko ◽  
Danielle da Rosa ◽  
Anike Virgili ◽  
Marcos Vasconcellos ◽  
Tania Costa ◽  
...  
Keyword(s):  
Mesoporous Silica ◽  
Carbon Paste Electrode ◽  
Electrochemical Sensors ◽  
Limit Of Detection ◽  
Sol Gel ◽  
Synthesis Method ◽  
Differential Pulse ◽  
Carbon Paste ◽  
Wide Range ◽  
Paste Electrode

In the present work, the sol-gel synthesis method was employed as strategy to obtain a magnetic and mesoporous silica-niobia material. The planned synthesis was based on the heterocondensation of niobium and silicon alkoxide precursors, in the presence of spherical magnetite particles. The resulting material presented interesting characteristics such as magnetism, large mesopores, in the range from 20 to 50 nm, and 68 m2 g−1 of surface area. These features allowed its use as modifier of carbon paste electrode for p-nitrophenol determination, since niobia has never been used in electrochemical sensors for the determination of nitrophenol compounds. By using differential pulse voltammetry technique, the electrode can be applied in a wide range of p-nitrophenol concentration, from 10 to 490 μmol L−1, with a limit of detection of 1.2 µmol L−1 and sensitivity up to 0.60 µA L µmol−1. The proposed electrode presented good sensitivity and selectivity and it was applied in real water samples.

Sign in / Sign up

Export Citation Format

Share Document