scholarly journals Influence Of Pressing Time On Physical And Mechanical Properties Of Particleboards Made From Scots Pine (Pinus sylvestris L.)

2020 ◽  
Vol 4 (2) ◽  
pp. 78-81
Author(s):  
Miglena VALYOVA ◽  
Daniel KOYNOV
Keyword(s):  
Mechanical Properties ◽  
Pinus Sylvestris ◽  
Scots Pine ◽  
Physical And Mechanical Properties ◽  
Pressing Time

scholarly journals Selected physical and mechanical properties of Scots pine (Pinus sylvestris L.) wood from stands of younger age classes as criteria for rational utilization of timber

2021 ◽  
Vol 27 (1) ◽  
Author(s):  
Przemysław Marcin Pikiński ◽  
Jaroslav Szaban ◽  
Gerda Šilingienė ◽  
Robert Korzeniewicz ◽  
Witold Pazdrowski
Keyword(s):  
Mechanical Properties ◽  
Pinus Sylvestris ◽  
Scots Pine ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Growth Conditions ◽  
Tree Age ◽  
Coniferous Forests ◽  
Forest Site ◽  
Quality Coefficient

The aim of this study was to assess the quality of Scots pine (Pinus sylvestris L.) wood depending on the age of trees, forest site conditions and social class of tree position in the stand. Analyses were based on the determination of specific density and static bending strength, as well as the strength quality coefficient. It was to determine changes in physical and mechanical properties of timber depending on tree age as well as growth conditions reflected in the forest site such as fresh mixed coniferous forests and fresh mixed broadleaved forests. Experimental plots were established in 6 localities with 30, 40 and 60-year-old trees. In each of the stands, a 1-hectare experimental plot was established. Based on the measured DBH and tree height, dimensions of three mean sample trees were calculated, while the classification of social class of tree position in the stand developed by Kraft (1884) was also applied. Analyses were conducted on wood samples with 12% moisture content. Strength tests on wood samples were performed on an Instron 33RH204 universal strength testing machine. A detailed analysis showed properties of pine wood are improved with an increase of tree age in both forest sites. Statistically significant differences were observed for wood density and static bending strength. More advantageous properties were observed for wood of pines from the less fertile forest site, i.e., fresh mixed coniferous forests. Density and static bending strength were markedly determined by tree age and growth conditions. The static bending strength quality coefficient from pines growing in the fresh mixed coniferous forests increased between 30 and 40 years, similarly as it was for the fresh mixed broadleaved forests, while between 40 and 60 years, it deteriorated for the fresh mixed coniferous forests. Wood density from the fresh mixed coniferous forests was by 3% to 7% greater than pines growing in fresh mixed broadleaved forests. In turn, static bending strength of wood from pines growing in fresh mixed coniferous forests was by 4% to 10% greater than trees from the fresh mixed broadleaved forests.  Keywords: Scots pine, wood properties, forest site, Poland

scholarly journals Influence of Scots Pine (Pinus sylvestris L.) Veneers Quality on Selected Properties of Layered Composite for Flooring Materials

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1017
Author(s):  
Izabela Burawska-Kupniewska ◽  
Paweł Mycka ◽  
Piotr Beer
Keyword(s):  
Mechanical Properties ◽  
Pinus Sylvestris ◽  
Scots Pine ◽  
Modulus Of Elasticity ◽  
Bending Strength ◽  
Deformation Modulus ◽  
Physical And Mechanical Properties ◽  
Production Costs ◽  
Base Layer ◽  
Class A

The article concerns the quality issues in wood industry, and especially the advisability of removing defects from veneers. The research purpose of the study was to analyse the influence of the layered structure of plywood base layer made of low-quality wood on selected mechanical properties of floor composites. The utilitarian purpose is to analyse the possibility of producing floors from low-quality materials reducing waste. Four quality classes of Scots pine veneers (Pinus sylvestris L.) were taken into account: A, B, C, D, from the highest class-A without defects to the lowest class-D characterized by a lot of knots (including broken and falling out ones) and cracks. The base layer of the floors was made of these wood quality classes. The value of the modulus of elasticity in elastic deformation, modulus of elasticity in the dynamic and fatigue tests, stiffness and static bending strength were investigated. The test results showed that, as expected, the samples made of class A had the highest values of the measured parameters (static bending strength, static and dynamic modulus of elasticity, and stiffness). However, the values of the tested parameters for the remaining classes B, C, and D did not significantly differ. It was concluded from the research that the change of the plywood base layer conditions regarding the quality of veneers does not significantly affect the physical and mechanical properties of composites. Hence, it is possible to use wood of lower quality classes for production without verification of which class they belong to, which will significantly reduce the production costs.

scholarly journals Vertical variability of selected macrostructural properties of juvenile wood organization in trunks of Scots pine (Pinus sylvestris L.) trees

2011 ◽  
Vol 76 (1) ◽  
pp. 27-33
Author(s):  
Arkadiusz Tomczak ◽  
Witold Pozdrowski ◽  
Tomasz Jelonek ◽  
Ireneusz Stypuła
Keyword(s):  
Mechanical Properties ◽  
Pinus Sylvestris ◽  
Scots Pine ◽  
Annual Ring ◽  
Juvenile Wood ◽  
Physical And Mechanical Properties ◽  
Wood Structure ◽  
Annual Rings ◽  
Tree Trunk ◽  
Wood Tissue

The study makes an attempt to analyse the width of annual rings, the width of the latewood zone and the proportion of the latewood within juvenile wood along trunks of Scots pine (<em>Pinus sylvestris</em> L.) trees and to verify the hypothesis about the heterogeneous properties of juvenile wood in a single trunk. It was found that the above-mentioned macrostructural elements of wood structure showed a curvilinear correlation with the height of measurement points along the tree trunk. As the distance from the base of trunk increased, the width of the annual ring and the width of the latewood zone decreased, while the proportion of the latewood increased. These types of changes can affect positively physical and mechanical properties of wood tissue. It can be assumed that there is a mechanism which modifies properties of juvenile wood causing axial diversification of the analysed type of wood tissue. It is probable that axial heterogeneity results in advantageous changes in the mechanics of the tree trunk.

Effect of thermomechanical densification of pine wood (Pinus sylvestris L.) on cutting forces and roughness during milling

2021 ◽  
Vol 113 ◽  
pp. 36-42
Author(s):  
Barbara Białowąs ◽  
Karol Szymanowski
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Statistical Analysis ◽  
Pinus Sylvestris ◽  
Cutting Forces ◽  
Physical And Mechanical Properties ◽  
Milling Process ◽  
Pine Wood ◽  
Roughness Index ◽  
Modified Wood

Effect of thermomechanical densification of pine wood (Pinus sylvestris L.) on cutting forces and roughness during milling. The paper presents the results of research concerning the assessment of machinability of pine wood thermomechanically compacted. The assessment was made on the basis of the cutting forces and surface roughness after the milling process. Selected properties of native and modified wood were examined. Based on the research, it was found that compacted wood is characterized by higher cutting forces during milling. The surface quality after milling was examined and the roughness index Ra values were determined. The research shows that the modified wood is characterized by a lower Ra value both along and across the grain. Statistical analysis showed that the modification had a statistically significant effect on the values of cutting forces and the physical and mechanical properties of the tested wood.

scholarly journals Environmentally-Friendly High-Density Polyethylene-Bonded Plywood Panels

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1166 ◽  
Author(s):  
Pavlo Bekhta ◽  
Ján Sedliačik
Keyword(s):  
Mechanical Properties ◽  
Hot Pressing ◽  
High Density Polyethylene ◽  
Phenol Formaldehyde ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
Core Layer ◽  
High Density ◽  
Pressing Pressure ◽  
Pressing Time

Thermoplastic films exhibit good potential to be used as adhesives for the production of veneer-based composites. This work presents the first effort to develop and evaluate composites based on alder veneers and high-density polyethylene (HDPE) film. The effects of hot-pressing temperature (140, 160, and 180 °C), hot-pressing pressure (0.8, 1.2, and 1.6 MPa), hot-pressing time (1, 2, 3, and 5 min), and type of adhesives on the physical and mechanical properties of alder plywood panels were investigated. The effects of these variables on the core-layer temperature during the hot pressing of multiplywood panels using various adhesives were also studied. Three types of adhesives were used: urea–formaldehyde (UF), phenol–formaldehyde (PF), and HDPE film. UF and PF adhesives were used for the comparison. The findings of this work indicate that formaldehyde-free HDPE film adhesive gave values of mechanical properties of alder plywood panels that are comparable to those obtained with traditional UF and PF adhesives, even though the adhesive dosage and pressing pressure were lower than when UF and PF adhesives were used. The obtained bonding strength values of HDPE-bonded alder plywood panels ranged from 0.74 to 2.38 MPa and met the European Standard EN 314-2 for Class 1 plywood. The optimum conditions for the bonding of HDPE plywood were 160 °C, 0.8 MPa, and 3 min.

scholarly journals Comparative Assessment Of Some Physical And Mechanical Properties Of Wood Of Different Scots Pine Climatypes

2021 ◽  
Vol 24 (2) ◽  
pp. 27-36
Author(s):  
Siarhei Rabko ◽  
Aliaksandr Kozel ◽  
Ivan Kimeichuk ◽  
Vasyl Yukhnovskyi
Keyword(s):  
Mechanical Properties ◽  
Scots Pine ◽  
Bending Strength ◽  
Geographical Origin ◽  
Testing Machine ◽  
Physical And Mechanical Properties ◽  
Forest Steppe ◽  
Siberian Pine ◽  
North Latitude

For a more efficient and rational use in the production of Scots pine wood of various geographical origin, it is necessary to know its physical and mechanical properties. The purpose of this study was to determine the physical and mechanical properties of wood of 17 climatic ecotypes of Scots pine and to carry out a comparative analysis of the indicators obtained for the studied climatypes separately and when they are grouped into subspecies in accordance with the classification of L.F. Pravdin. The range of the geographical origin of the places of seed procurement is from 47 to 62° north latitude and from 22 to 85° east longitude. The modern density universal testing machine MTS INSIGHT 100 was used for research. As a result of the research, it was found that the density of wood in an absolutely dry state varies from 370 kg/m3 (Kursk climatype) to 524 kg/m3 (Volgograd climatype), and at 12% humidity – from 397 kg/m3 (Kursk climatype) to 550 kg/m3 (Volgograd climatype). The index of the strength of wood of the studied climatypes for compression along the fibres was from 32 MPa (Kursk climatype) to 54 MPa (Volgograd climatype), and for static bending – from 55 to 92 MPa for the Vologda and Ulyanovsk climatypes, respectively. Distribution of Scots pine climatypes into subspecies in accordance with the classification of L.F. Pravdin and the obtained data on the physical and mechanical properties of wood have a certain pattern. The maximum density of wood at 12% moisture is typical for the European Scots pine subspecies is 497±8 kg/m3 , the minimum value of this indicator for the Siberian Scots pine subspecies is 423±30 kg/m3 . An intermediate position is occupied by the subspecies of Lapland pine and Forest-steppe pine with values of 483±16 and 464±12 kg/m3 , respectively. The strength index of wood in the studied subspecies for compression along the fibres ranged from 47±1 MPa (European subspecies) to 33±4 MPa (Siberian subspecies), in the Lapland pine subspecies – 44±2 MPa and somewhat lower in the Forest-steppe pine subspecies – 42±2 MPa. The maximum value of the static bending strength of wood is typical for the European pine subspecies – 78±4 MPa, and the minimum – for the Siberian pine subspecies – 61±14 MPa. This indicator turned out to be equal in subspecies of forest-steppe and Lapland pine and amounted to 72±4 MPa. The practical value of the work lies in identifying the existing differences and variability among climatypes according to the studied physical and mechanical properties of wood and selecting the most promising of them for further breeding purposes

scholarly journals EFFECTS OF HOT PRESSING PARAMETERS ON THE PROPERTIES OF HARDBOARDS PRODUCED FROM MIXED HARDWOOD TREE SPECIES

Wood Research ◽  
2021 ◽  
Vol 66 (3) ◽  
pp. 437-448
Author(s):  
Petar Antov ◽  
Viktor Savov ◽  
Nikolay Neykov ◽  
Ľuboš Krišťák
Keyword(s):  
Mechanical Properties ◽  
Tree Species ◽  
Hot Pressing ◽  
Raw Materials ◽  
Physical And Mechanical Properties ◽  
European Beech ◽  
Pressing Pressure ◽  
Wet Process ◽  
Pressing Time ◽  
Hardwood Tree

In this work, wet-process fibreboards (hardboards) were produced in the laboratory using industrial wood fibres of the species European beech (Fagus sylvatica L.) and Turkey oak (Quercus cerris L.) at the total volume of 40%, and white poplar (Populus alba L.) at 60% volume. The effects of hot pressing pressure (varied from 3.3 MPa to 5.3 MPa) and pressing time (from 255 s to 355 s) on the physical and mechanical properties of hardboards were investigated and optimal values of the parameters for fulfilling the European standard requirements were determined. It was concluded that hardboards with acceptable physical and mechanical properties may be produced from 60% poplar wood waste and residues, combined with 40% hardwood raw materials (beech and oak) by regulating the hot pressing regime only, i.e. pressure and pressing time. The following minimum parameters for producing hardboards from mixed hardwood tree species were determined: a pressure of 4.6 MPa and a pressing time of 280 s.

Sign in / Sign up

Export Citation Format

Share Document