scholarly journals SPATIALLY SQUEEZED ELECTROMAGNETIC MODES OF A TRANSFORMATIONAL OPTICS BASED CAVITY RESONATOR FOR TARGETED MATERIAL HEATING

2021 ◽  
Vol 106 ◽  
pp. 205-214
Author(s):  
Barakathulla Asrafali ◽  
Chakravarthy Venkateswaran ◽  
Natesan Yogesh
Keyword(s):  
Cavity Resonator ◽  
Material Heating

Microwave resonance method for measuring microliter volumes of free moisture in aviation fuels

2020 ◽  
pp. 49-56
Author(s):  
Vitaly V. Volkov ◽  
Michael A. Suslin ◽  
Jamil U. Dumbolov
Keyword(s):  
Solid Surface ◽  
Free Water ◽  
Resonance Method ◽  
Cavity Resonator ◽  
Maximum Error ◽  
Aviation Fuel ◽  
Fuel Quality ◽  
Microwave Resonance ◽  
Free Moisture ◽  
Microwave Losses

One of the conditions for ensuring the safety of air transport operation is the quality of aviation fuel refueled in aircraft. Fuel quality control is a multi-parameter task that includes monitoring the free moisture content. Regulatory documents establish the content of free water no more than 0.0015% by weight. It is developed a direct electrometric microwave resonance method for controlling free moisture in aviation fuels, which consists in changing the shape of the water drops by pressing them on a solid surface inside a cylindrical cavity resonator. This can dramatically increase dielectric losses. Analytical and experimental analysis of the proposed method is carried out. The control range from 0,5 to 30 μl of absolute volume of moisture in aviation fuels with a maximum error of not morethan 25 % is justified. The sensitivity of the proposed method for monitoring microwave losses in free moisture drops transformed into a thin layer by pressing is an order of magnitude greater than the sensitivity of the method for monitoring microwave losses in moisture drops on a solid surface in a resonator. The proposed method can be used as a basis for the development of devices for monitoring the free moisture of aviation fuels in the conditions of the airfield and laboratory. The direction of development of the method is shown.

Effect of Varied Probe Length on the Resonant Frequency of a Circular Cross-Sectional Cavity

2005 ◽  
Vol 2 (2) ◽  
pp. 79
Author(s):  
Mohd Khairul Mohd Salleh ◽  
Mohamad Syukri Suhaili ◽  
Zuhani Ismail ◽  
Zaiki Awang
Keyword(s):  
Resonant Frequency ◽  
Cavity Resonator ◽  
Simple Design ◽  
Cross Sectional ◽  
Probe Length ◽  
Mode Wave ◽  
The One

A simple design of a metallic circular cross-sectional air-filled cavity is presented. Two probes of varied lengths are used to excite TE112-mode wave into the cavity to give a resonant frequency of 5.86 GHz. The experiments show that the resonant frequency of the cavity resonator decreases as the lengths of the probes are increased. The shortest probe in the range of study gives the closest resonant frequency to the one desired.

Sign in / Sign up

Export Citation Format

Share Document