scholarly journals A NOVEL PSO-BASED TRANSFER EFFICIENCY OPTIMIZATION ALGORITHM FOR WIRELESS POWER TRANSFER

2018 ◽  
Vol 85 ◽  
pp. 63-75 ◽  
Author(s):  
Meng Wang ◽  
Jing Feng ◽  
Yanyan Shi ◽  
Minghui Shen ◽  
Jianwei Jing
2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Qiang Zhao ◽  
Anna Wang

Magnetic coupling resonant wireless power transfer network (MCRWPTN) system can realize wireless power transfer for some electrical equipment real-time and high efficiency in a certain spatial scale, which resolves the contradiction between power transfer efficiency and the power transfer distance of the wireless power transfer. A fully coupled resonant energy transfer model for multirelay coils and ports is established. A dynamic adaptive impedance matching control based on fully coupling matrix and particle swarm optimization algorithm based on annealing is developed for the MCRWPTN. Furthermore, as an example, the network which has twenty nodes is analyzed, and the best transmission coefficient which has the highest power transfer efficiency is found using the optimization algorithm, and the coupling constraints are considered simultaneously. Finally, the effectiveness of the proposed method is proved by the simulation results.


Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1417
Author(s):  
Jung-Hoon Cho ◽  
Byoung-Hee Lee ◽  
Young-Joon Kim

Electronic devices usually operate in a variable loading condition and the power transfer efficiency of the accompanying wireless power transfer (WPT) method should be optimizable to a variable load. In this paper, a reconfigurable WPT technique is introduced to maximize power transfer efficiency in a weakly coupled, variable load wireless power transfer application. A series-series two-coil wireless power network with resonators at a frequency of 150 kHz is presented and, under a variable loading condition, a shunt capacitor element is added to compensate for a maximum efficiency state. The series capacitance element of the secondary resonator is tuned to form a resonance at 150 kHz for maximum power transfer. All the capacitive elements for the secondary resonators are equipped with reconfigurability. Regardless of the load resistance, this proposed approach is able to achieve maximum efficiency with constant power delivery and the power present at the load is only dependent on the input voltage at a fixed operating frequency. A comprehensive circuit model, calculation and experiment is presented to show that optimized power transfer efficiency can be met. A 50 W WPT demonstration is established to verify the effectiveness of this proposed approach.


2011 ◽  
Vol 383-390 ◽  
pp. 5984-5989
Author(s):  
Yan Ping Yao ◽  
Hong Yan Zhang ◽  
Zheng Geng

In this paper, we present theoretical analysis and detailed design of a class of wireless power transfer (WPT) systems based on strong coupled magnetic resonances. We established the strong coupled resonance conditions for practically implementable WPT systems. We investigated the effects of non-ideal conditions presented in most practical systems on power transfer efficiency and proposed solutions to deal with these problems. We carried out a design of WPT system by using PCB (Printed Circuit Board) antenna pair, which showed strong coupled magnetic resonances. The innovations of our design include: (1) a new coil winding pattern for resonant coils that achieves a compact space volume, (2) fabrication of resonant coils on PCBs, and (3) integration of the entire system on a pair of PCBs. Extensive experiments were performed and experimental results showed that our WPT system setup achieved a guaranteed power transfer efficiency 14% over a distance of two times characteristic length(44cm). The wireless power transfer efficiency in this PCB based experimental system was sufficiently high to lighten up a LED with a signal generator.


Sign in / Sign up

Export Citation Format

Share Document