scholarly journals WIDEBAND APERTURE COUPLED PATCH ARRAY ANTENNAS - HIGH GAIN, LOW SIDE LOBE DESIGN

2017 ◽  
Vol 160 ◽  
pp. 71-87 ◽  
Author(s):  
Dhruva Poduval ◽  
Mohammod Ali
Keyword(s):  
Side Lobe ◽  
High Gain ◽  
Array Antennas

scholarly journals A Tutorial on Optical Feeding of Millimeter-Wave Phased Array Antennas for Communication Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-22 ◽  
Author(s):  
Ivan Aldaya ◽  
Gabriel Campuzano ◽  
Gerardo Castañón ◽  
Alejandro Aragón-Zavala
Keyword(s):  
Millimeter Wave ◽  
High Speed ◽  
Phased Array ◽  
Path Loss ◽  
High Gain ◽  
Interference Avoidance ◽  
Amplitude Control ◽  
Phased Array Antennas ◽  
Array Antennas ◽  
The Impact

Given the interference avoidance capacity, high gain, and dynamical reconfigurability, phased array antennas (PAAs) have emerged as a key enabling technology for future broadband mobile applications. This is especially important at millimeter-wave (mm-wave) frequencies, where the high power consumption and significant path loss impose serious range constraints. However, at mm-wave frequencies the phase and amplitude control of the feeding currents of the PAA elements is not a trivial issue because electrical beamforming requires bulky devices and exhibits relatively narrow bandwidth. In order to overcome these limitations, different optical beamforming architectures have been presented. In this paper we review the basic principles of phased arrays and identify the main challenges, that is, integration of high-speed photodetectors with antenna elements and the efficient optical control of both amplitude and phase of the feeding current. After presenting the most important solutions found in the literature, we analyze the impact of the different noise sources on the PAA performance, giving some guidelines for the design of optically fed PAAs.

Design and Analysis of High Gain Slotted SIW Array Antennas at Ka-Band

2020 ◽  
Author(s):  
Bharath Kunooru ◽  
Srujana Vahini Nandigama ◽  
Rama Krishna Dasari
Keyword(s):  
High Gain ◽  
Ka Band ◽  
Array Antennas

scholarly journals Ka-Band Lightweight High-Efficiency Wideband 3D Printed Reflector Antenna

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Yu Zhai ◽  
Ding Xu ◽  
Yan Zhang
Keyword(s):  
High Efficiency ◽  
Near Field ◽  
Side Lobe ◽  
High Gain ◽  
Reflector Antenna ◽  
Field Analysis ◽  
Side Lobe Level ◽  
Ka Band ◽  
3D Printed ◽  
Reflecting Surface

This paper presents a lightweight, cost-efficient, wideband, and high-gain 3D printed parabolic reflector antenna in the Ka-band. A 10 λ reflector is printed with polylactic acid- (PLA-) based material that is a biodegradable type of plastic, preferred in 3D printing. The reflecting surface is made up of multiple stacked layers of copper tape, thick enough to function as a reflecting surface (which is found 4 mm). A conical horn is used for the incident field. A center-fed method has been used to converge the energy in the broadside direction. The proposed antenna results measured a gain of 27.8 dBi, a side lobe level (SLL) of −22 dB, and a maximum of 61.2% aperture efficiency (at 30 GHz). A near-field analysis in terms of amplitude and phase has also been presented which authenticates the accurate spherical to planar wavefront transformation in the scattered field.

scholarly journals Design and Analysis of Novel Fractal Linear and Planar Array Antennas for Satellite Applications

2016 ◽  
Vol 5 (3) ◽  
pp. 56 ◽  
Author(s):  
V. A. Sankar ◽  
P. V. Y. Jayasree
Keyword(s):  
Design Methodology ◽  
Beam Width ◽  
Side Lobe ◽  
Circular Ring ◽  
Geometric Design ◽  
Side Lobe Level ◽  
Array Antennas ◽  
Repetitive Nature ◽  
Satellite Applications ◽  
Planar Array

This article proposed a new geometric design methodology for the systematic expansion of fractal linear and planar array antennas. Using this proposed geometric design methodology any deterministic polygon shape can be constructed. In this article, two element fractal linear and triangular array antennas are examined using proposed methodology up to four iterations of two expansion factors. Due to the repetitive nature of the proposed geometric design methodology, both linear and planar fractal arrays shows multi-beam behavior with excellent array factor properties. The behavior of the proposed arrays shows better performance than linear and planar fractal array antennas generated by concentric circular ring sub array geometric generator. Triangular planar fractal array of expansion factor two at fourth iteration achieved a single valued beam width of 3.80 with -31.6 side lobe level. The suggested fractal arrays are analyzed and simulated by MATLAB-13 programming.

Sub-terahertz (THz) antenna for Internet of Things and 6G Communication

Frequenz ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Hamsakutty Vettikalladi ◽  
Waleed Tariq Sethi ◽  
Wonsuk Ko
Keyword(s):  
Internet Of Things ◽  
Wireless Communication ◽  
Communication Systems ◽  
Side Lobe ◽  
High Gain ◽  
Impedance Bandwidth ◽  
Single Element ◽  
High Frequency Structure Simulator ◽  
Sixth Generation ◽  
Intelligent Communication

Abstract Sub-terahertz (THz) technology is expected to deliver exceptional data rates for future sixth generation wireless communication systems especially for intelligent communication among devices falling under the Internet of Things (IoT) category. Moving from current 5G millimeter wave (mmW) technology towards THz spectrum will eventually provide unprecedented solutions that will guarantee higher transmission rates and channel capacity for any wireless communication system. With various electronic and wireless components working together to fulfill this promise, high gain antennas having compact profile is one such technology that will aid in achieving sub-THz communication while offering low path and power losses with reliable and fast data transfers. In this context, this work proposes a novel deformed patch antenna operating in the sub-THz spectrum i.e. at 300 GHz band. The proposed antenna is fed via a microstrip line following the proximity coupled feeding technique. Utilizing this technique provides a wide impedance bandwidth with a broadside radiation pattern having minimum side lobe levels of around −12 dB and a directivity of 10–15 dBi for the single and array elements respectively. The proposed design has a small footprint of 1.5 × 1.5 × 0.06 mm3 for the single element while the array element has dimensions of 6 × 5 × 0.06 mm3. Both the designs have been simulated in Computer Simulation Technology-Microwave Studio (CST-MWS) and the results verified via high-frequency structure simulator (HFSS) simulator. The results confirm the viability of the proposed designs to be potential candidates for future sixth generation and IoT based applications.

scholarly journals Wide-Angle Scanning Phased Array Antenna using High Gain Pattern Reconfigurable Antenna Elements

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
ByungKuon Ahn ◽  
In-June Hwang ◽  
Kwang-Seok Kim ◽  
Soo-Chang Chae ◽  
Jong-Won Yu ◽  
...  
Keyword(s):  
Phased Array ◽  
High Gain ◽  
Array Antenna ◽  
Reconfigurable Antenna ◽  
Wide Angle ◽  
Phased Array Antenna ◽  
Design Guideline ◽  
Phased Array Antennas ◽  
Array Antennas ◽  
Scanning Range

AbstractThis paper presents a wide-angle scanning phased array antenna using high gain pattern reconfigurable antenna (PRA) elements. Using PRA elements is an attractive solution for wide-angle scanning phased array antennas because the scanning range can be divided into several subspaces. To achieve the desired scanning performance, some characteristics of the PRA element such as the number of switching modes, tilt angle, and maximum half-power beamwidth (HPBW) are required. We analyzed the required characteristics of the PRA element according to the target scanning range and element spacing, and presented a PRA element design guideline for phased array antennas. In accordance with the guideline, the scanning range was set as ±70° and a high gain PRA element with three reconfigurable patterns was used to compose an 8x1 array antenna with 0.9 λ0 spacing. After analyzing whether the active element patterns meet the guideline, the array antenna was fabricated and measured to demonstrate the scanning performance. The fabricated array can scan its beam from -70° to 70° by dividing the scanning range into three subspaces. It shows that even if the array antenna has large element spacing, the desired scanning performance can be obtained using the elements designed under the guideline.

IMPROVEMENT OF DIPOLE ANTENNA GAIN USING 8 CBU AMC-EBG AND 8 CBU FSS

2017 ◽  
Vol 79 (4) ◽  
Author(s):  
Maisarah Abu ◽  
Siti Adlina Md Ali ◽  
Siti Normi Zabri
Keyword(s):  
Transport System ◽  
Ground Plane ◽  
Side Lobe ◽  
High Gain ◽  
Dipole Antenna ◽  
Intelligent Transport System ◽  
Antenna Gain ◽  
Radiation Patterns ◽  
Intelligent Transport

This paper investigates the performances of dipole antenna incorporated with and without 8 CBU AMC-EBG and 8 CBU FSS at 5.8 GHz. The designs are simulated on Rogers RO 3010. Due to the flexibility of the material used as a substrate, the effect of a different angle is investigated. Both 8 CBU AMC-EBG and 8 CBU FSS act as reasonably good ground plane for the dipole antenna and help improving the realised gain and improve the radiation patterns by push the front lobe at the same time reduce the side lobes. The maximum improvements led by dipole antenna with 8 CBU AMC-EBG thus 8.543 dB of realised gain achieved and the front lobe is pushed higher and the side lobe is significantly lowered than with 8 CBU FSS. The designs of dipole antenna with 8 CBU AMC-EBG and 8 CBU FSS can be applied as high gain  atenna for Intelligent Transport System (ITS).

Sign in / Sign up

Export Citation Format

Share Document