scholarly journals POLARIMETRIC SAR TOMOGRAPHY USING l2,1 MIXED NORM SPARSE RECONSTRUCTION METHOD

2012 ◽  
Vol 130 ◽  
pp. 105-130 ◽  
Author(s):  
Shiqi Xing ◽  
Dahai Dai ◽  
Yongzhen Li ◽  
Xuesong Wang
Keyword(s):  
Sparse Reconstruction ◽  
Mixed Norm ◽  
Reconstruction Method ◽  
Polarimetric Sar

Sparse Reconstruction Method of Non-Uniform Sampling and its Application in Blade Tip Timing System

2020 ◽  
Author(s):  
Jie Tian ◽  
Xiaopu Zhang ◽  
Yong Chen ◽  
Peter Russhard ◽  
Hua Ouyang
Keyword(s):  
Compressive Sensing ◽  
Sparse Reconstruction ◽  
Reconstruction Method ◽  
Blade Vibration ◽  
Uniform Sampling ◽  
Blade Vibrations ◽  
Timing Data ◽  
Blade Tip ◽  
Simultaneous Identification ◽  
Multi Mode

Abstract Based on the blade vibration theory of turbomachinery and the basic principle of blade timing systems, a sparse reconstruction model is derived for the tip timing signal under an arbitrary sensor circumferential placement distribution. The proposed approach uses the sparsity of the tip timing signal in the frequency domain. The application of compressive sensing in reconstructing the blade tip timing signal and monitoring multi-mode blade vibrations is explored. To improve the reconstruction effect, a number of numerical experiments are conducted to examine the effects of various factors on synchronous and non-synchronous signals. This enables the specific steps involved in the compressive sensing reconstruction of tip timing signals to be determined. The proposed method is then applied to the tip timing data of a 27-blade rotor. The results show that the method accurately identifies the multi-mode blade vibrations at different rotation speeds. The proposed method has the advantages of low dependence on prior information, insensitivity to environmental noise, and simultaneous identification of synchronous and non-synchronous signals. The experimental results validate the effectiveness of the proposed approach in engineering applications.

scholarly journals Two 2-D DOA Estimation Methods with Full and Partial Generalized Virtual Aperture Extension Technology

2019 ◽  
Vol 2019 ◽  
pp. 1-11
Author(s):  
Riheng Wu ◽  
Yangyang Dong ◽  
Zhenhai Zhang ◽  
Le Xu
Keyword(s):  
Data Model ◽  
Doa Estimation ◽  
Nonsingular Matrix ◽  
Eigenvalue Decomposition ◽  
Estimation Methods ◽  
Sparse Reconstruction ◽  
Invariance Property ◽  
Reconstruction Method ◽  
Uniqueness Of Solutions ◽  
Moderate Complexity

We address the two-dimensional direction-of-arrival (2-D DOA) estimation problem for L-shaped uniform linear array (ULA) using two kinds of approaches represented by the subspace-like method and the sparse reconstruction method. Particular interest emphasizes on exploiting the generalized conjugate symmetry property of L-shaped ULA to maximize the virtual array aperture for two kinds of approaches. The subspace-like method develops the rotational invariance property of the full virtual received data model by introducing two azimuths and two elevation selection matrices. As a consequence, the problem to estimate azimuths represented by an eigenvalue matrix can be first solved by applying the eigenvalue decomposition (EVD) to a known nonsingular matrix, and the angles pairing is automatically implemented via the associate eigenvector. For the sparse reconstruction method, first, we give a lemma to verify that the received data model is equivalent to its dictionary-based sparse representation under certain mild conditions, and the uniqueness of solutions is guaranteed by assuming azimuth and elevation indices to lie on different rows and columns of sparse signal cross-correlation matrix; we then derive two kinds of data models to reconstruct sparse 2-D DOA via M-FOCUSS with and without compressive sensing (CS) involvements; finally, the numerical simulations validate the proposed approaches outperform the existing methods at a low or moderate complexity cost.

Use of delay and sum for sparse reconstruction improvement for structural health monitoring

2019 ◽  
Vol 30 (18-19) ◽  
pp. 2919-2931 ◽  
Author(s):  
Ali Nokhbatolfoghahai ◽  
Hossein M Navazi ◽  
Roger M Groves
Keyword(s):  
Structural Health Monitoring ◽  
Damage Detection ◽  
Health Monitoring ◽  
Guided Waves ◽  
Lamb Waves ◽  
Spot Size ◽  
Sparse Reconstruction ◽  
Reconstruction Method ◽  
Structural Health ◽  
Computational Performance

To perform active structural health monitoring, guided Lamb waves for damage detection have recently gained extensive attention. Many algorithms are used for damage detection with guided waves and among them, the delay-and-sum method is the most commonly used algorithm because of its robustness and simplicity. However, delay-and-sum images tend to have poor accuracy with a large spot size and a high noise floor, especially in the presence of multiple damages. To overcome these problems, another method that is based on sparse reconstruction can be used. Although the images produced by the sparse reconstruction method are superior to the conventional delay-and-sum method, it has the challenges of the time and cost of computations in comparison with the delay-and-sum method. Also, in some cases in multi-damage detection, the sparse reconstruction method totally fails. In this article, using prior support information of the structure achieved by the delay-and-sum method, a hybrid method based on sparse reconstruction method is proposed to improve the computational performance and robustness of sparse reconstruction method in the case of multi-damage presence. The effectiveness of the proposed method in detecting damages is demonstrated experimentally and numerically on a simple aluminum plate. The technique is also shown to accurately identify and localize multi-site damages as well as single damage with low sampled signals.

scholarly journals A sparse reconstruction method for the estimation of multi-resolution emission fields via atmospheric inversion

2015 ◽  
Vol 8 (4) ◽  
pp. 1259-1273 ◽  
Author(s):  
J. Ray ◽  
J. Lee ◽  
V. Yadav ◽  
S. Lefantzi ◽  
A. M. Michalak ◽  
...  
Keyword(s):  
Field Model ◽  
Computational Cost ◽  
Estimation Method ◽  
Sparse Reconstruction ◽  
Model Parameters ◽  
Reconstruction Method ◽  
Reconstruction Procedure ◽  
Reconstruction Methods ◽  
Atmospheric Inversion ◽  
Atmospheric Inversions

Abstract. Atmospheric inversions are frequently used to estimate fluxes of atmospheric greenhouse gases (e.g., biospheric CO2 flux fields) at Earth's surface. These inversions typically assume that flux departures from a prior model are spatially smoothly varying, which are then modeled using a multi-variate Gaussian. When the field being estimated is spatially rough, multi-variate Gaussian models are difficult to construct and a wavelet-based field model may be more suitable. Unfortunately, such models are very high dimensional and are most conveniently used when the estimation method can simultaneously perform data-driven model simplification (removal of model parameters that cannot be reliably estimated) and fitting. Such sparse reconstruction methods are typically not used in atmospheric inversions. In this work, we devise a sparse reconstruction method, and illustrate it in an idealized atmospheric inversion problem for the estimation of fossil fuel CO2 (ffCO2) emissions in the lower 48 states of the USA. Our new method is based on stagewise orthogonal matching pursuit (StOMP), a method used to reconstruct compressively sensed images. Our adaptations bestow three properties to the sparse reconstruction procedure which are useful in atmospheric inversions. We have modified StOMP to incorporate prior information on the emission field being estimated and to enforce non-negativity on the estimated field. Finally, though based on wavelets, our method allows for the estimation of fields in non-rectangular geometries, e.g., emission fields inside geographical and political boundaries. Our idealized inversions use a recently developed multi-resolution (i.e., wavelet-based) random field model developed for ffCO2 emissions and synthetic observations of ffCO2 concentrations from a limited set of measurement sites. We find that our method for limiting the estimated field within an irregularly shaped region is about a factor of 10 faster than conventional approaches. It also reduces the overall computational cost by a factor of 2. Further, the sparse reconstruction scheme imposes non-negativity without introducing strong nonlinearities, such as those introduced by employing log-transformed fields, and thus reaps the benefits of simplicity and computational speed that are characteristic of linear inverse problems.

Adaptive Dual Conjudate Gradient Projection Algorithm for Compressed Sensing Image Reconstruction

2013 ◽  
Vol 347-350 ◽  
pp. 2600-2604
Author(s):  
Hai Xia Yan ◽  
Yan Jun Liu
Keyword(s):  
Image Reconstruction ◽  
Compressed Sensing ◽  
Gradient Projection ◽  
Projection Algorithm ◽  
Sparse Reconstruction ◽  
Reconstruction Method ◽  
Reconstruction Accuracy ◽  
Reconstruction Quality ◽  
Dual Gradient

In order to improve the quality of noise signals reconstruction method, an algorithm of adaptive dual gradient projection for sparse reconstruction of compressed sensing theory is proposed. In ADGPSR algorithm, the pursuit direction is updated in two conjudate directions, the better original signals estimated value is computed by conjudate coefficient. Thus the reconstruction quality is improved. Experiment results show that, compared with the GPSR algorithm, the ADGPSR algorithm improves the signals reconstruction accuracy, improves PSNR of reconstruction signals, and exhibits higher robustness under different noise intensities.

Sign in / Sign up

Export Citation Format

Share Document