scholarly journals A NEW TRIPLE BAND CIRCULARLY POLARIZED SQUARE SLOT ANTENNA DESIGN WITH CROOKED T AND F-SHAPE STRIPS FOR WIRELESS APPLICATIONS

2011 ◽  
Vol 121 ◽  
pp. 1-18 ◽  
Author(s):  
Sasan Ahdi Rezaeieh ◽  
Mesut Kartal
Keyword(s):  
Antenna Design ◽  
Slot Antenna ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Triple Band

scholarly journals Design of Circularly Polarized Triple-Band Wearable Textile Antenna with Safe Low SAR for Human Health

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1366 ◽  
Author(s):  
Ashok Yadav ◽  
Vinod Kumar Singh ◽  
Pranay Yadav ◽  
Amit Kumar Beliya ◽  
Akash Kumar Bhoi ◽  
...  
Keyword(s):  
Microstrip Line ◽  
Radiation Effect ◽  
Axial Ratio ◽  
Antenna Design ◽  
Circularly Polarized ◽  
Frequency Bands ◽  
Textile Antenna ◽  
Peak Gain ◽  
Triple Band ◽  
Ku Band

In this manuscript, an antenna on textile (jeans) substrate is presented for the WLAN, C band and X/Ku band. This is a wearable textile antenna, which was formed on jeans fabric substrate to reduce surface-wave losses. The proposed antenna design consists of a patch and a defected ground. To energize the wearable textile antenna, a microstrip line feed technique is used in the design. The impedance band width of 23.37% (3.4–4.3 GHz), 56.48% (4.7–8.4 GHz) and 31.14% (10.3–14.1 GHz) frequency bands are observed, respectively. The axial ratio bandwidth (ARBW) of 10.10% (4.7–5.2 GHz), 4.95% (5.9–6.2 GHz) and 10.44% (11.8–13.1 GHz) frequency bands are observed, respectively. A peak gain of 4.85 dBi is analyzed at 4.1-GHz frequency during the measurement. The SAR value was calculated to observe the radiation effect and it was found that its utmost SAR value is 1.8418 W/kg and 1.919 W/kg at 5.2/5.5-GHz frequencies, which is less than 2 W/kg of 10 gm tissue. The parametric study is performed for the validation of the proper functioning of the antenna.

A Compact CPW Fed Wideband Slot Antenna for Wireless Communications

2020 ◽  
pp. 2050184
Author(s):  
Amrita Gorai ◽  
Bappadittya Roy ◽  
G. K. Mahanti
Keyword(s):  
Wireless Communications ◽  
Coplanar Waveguide ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Fractional Bandwidth ◽  
Ieee 802.11A ◽  
Circularly Polarized ◽  
Wireless Applications ◽  
Simulation Results

A compact circularly polarized CPW-fed slot antenna is proposed here. The antenna consists of a pentagonal patch within an asymmetrical slot with a single coplanar waveguide feed. The proposed antenna is excited with CPW feed mechanism and investigated experimentally. The structure is fabricated on FR4 epoxy substrate with a permittivity of 4.4. The impedance bandwidth of 10[Formula: see text]GHz (4[Formula: see text]GHz to 14[Formula: see text]GHz) and the axial ratio bandwidth of 1.2[Formula: see text]GHz with the corresponding fractional bandwidth of 113%. The simulation results fulfil the bandwidth requirements of IEEE 802.11a (5.15–5.35[Formula: see text]GHz/5.47–5.725[Formula: see text]GHz) for wireless applications. In terms of bandwidth, compactness and circular polarization comparable results between simulated and measured results clearly show the validity of the proposed structure.

scholarly journals SINGLE-FEED TRIPLE-BAND CIRCULARLY POLARIZED SPIDRON FRACTAL SLOT ANTENNA

2013 ◽  
Vol 143 ◽  
pp. 207-221 ◽  
Author(s):  
Thuy Nguyen Thi ◽  
Son Trinh-Van ◽  
Gina Kwon ◽  
Keum Cheol Hwang
Keyword(s):  
Slot Antenna ◽  
Circularly Polarized ◽  
Triple Band

Design of a compact broadband circularly-polarized slot antenna for wireless applications

2012 ◽  
Vol 55 (2) ◽  
pp. 413-418 ◽  
Author(s):  
Sasan Ahdi Rezaeieh ◽  
Serkan Şimşek ◽  
Javad Pourahmadazar
Keyword(s):  
Slot Antenna ◽  
Circularly Polarized ◽  
Wireless Applications
Sign in / Sign up

Export Citation Format

Share Document