APPLICATION OF ARTIFICIAL GROUND PLANES IN DUAL-BAND ORTHOGONALLY-POLARIZED LOW-PROFILE HIGH-GAIN PLANAR ANTENNA DESIGN

2008 ◽  
Vol 84 ◽  
pp. 407-436 ◽  
Author(s):  
Alireza Foroozesh ◽  
Malcolm Ng Mou Kehn ◽  
Lotfollah Shafai
Keyword(s):  
High Gain ◽  
Antenna Design ◽  
Dual Band ◽  
Planar Antenna ◽  
Low Profile

scholarly journals Miniaturized Broadband-Multiband Planar Monopole Antenna in Autonomous Vehicles Communication System Device

Electronics ◽  
2021 ◽  
Vol 10 (21) ◽  
pp. 2715
Author(s):  
Ming-An Chung ◽  
Chih-Wei Yang
Keyword(s):  
Communication System ◽  
Autonomous Vehicles ◽  
Low Cost ◽  
Antenna Design ◽  
Dual Band ◽  
Impedance Change ◽  
Antenna Structure ◽  
Low Profile ◽  
Performance Results ◽  
Wireless Standards

The article mainly presents that a simple antenna structure with only two branches can provide the characteristics of dual-band and wide bandwidths. The recommended antenna design is composed of a clockwise spiral shape, and the design has a gradual impedance change. Thus, this antenna is ideal for applications also recommended in these wireless standards, including 5G, B5G, 4G, V2X, ISM band of WLAN, Bluetooth, WiFI 6 band, WiMAX, and Sirius/XM Radio for in-vehicle infotainment systems. The proposed antenna with a dimension of 10 × 5 mm is simple and easy to make and has a lot of copy production. The operating frequency is covered with a dual-band from 2000 to 2742 MHz and from 4062 to beyond 8000 MHz and, it is also demonstrated that the measured performance results of return loss, radiation, and gain are in good agreement with simulations. The radiation efficiency can reach 91% and 93% at the lower and higher bands. Moreover, the antenna gain can achieve 2.7 and 6.75 dBi at the lower and higher bands, respectively. This antenna design has a low profile, low cost, and small size features that may be implemented in autonomous vehicles and mobile IoT communication system devices.

Dual-band low-profile planar antenna for mobile communication application

2015 ◽  
Vol 9 (2) ◽  
pp. 447-452 ◽  
Author(s):  
Xi-Wang Dai ◽  
Tao Zhou ◽  
Bo-Ran Guan
Keyword(s):  
Frequency Band ◽  
Mobile Communication ◽  
High Frequency ◽  
Microstrip Line ◽  
Low Frequency ◽  
Dual Band ◽  
Planar Antenna ◽  
Frequency Resonance ◽  
Low Profile ◽  
High Frequency Resonance

A novel dual-band planar antenna with a low profile for mobile communication system is proposed in this paper. The antenna is composed of one shorted patch with two radiating notches for low frequency resonance and one square patch for high frequency resonance. The low profile is achieved via the shorting patch, which introduces the parallel electrical field between the reflector and antenna. A step-impedance microstrip line is used to feed the antenna. The coupling between the square patch and microstrip line cancels out the inductance of shorting probe, which increases the working bandwidth of proposed antenna. A prototype with a low profile of 0.0286λ is fabricated and measured. The antenna achieves dual impedance bandwidths of 1.6% for the low frequency band and 60% for the high frequency band, covering the frequency range 851–865 MHz and 1.97–3.65 GHz, respectively. The measured results show good agreements with the simulated ones.

Comparison of wideband High-Impedance Surfaces for low-profile high-gain UHF antenna design

2015 ◽  
Author(s):  
Nora Mohamed Mohamed-Hicho ◽  
Eva Antonino-Daviu ◽  
Marta Cabedo-Fabres ◽  
Miguel Ferrando-Bataller ◽  
Daniel Sanchez-Escuderos
Keyword(s):  
High Gain ◽  
Antenna Design ◽  
High Impedance ◽  
Low Profile ◽  
Uhf Antenna
Sign in / Sign up

Export Citation Format

Share Document