Experimental and Numerical Study of Gravity Effects on Oil Recovery in Fractured Carbonates

2014 ◽  
Author(s):  
Amar J Alshehri ◽  
Anthony Robert Kovscek
Keyword(s):  
Oil Recovery ◽  
Numerical Study ◽  
Gravity Effects ◽  
Fractured Carbonates

scholarly journals CO$$_{2}$$ Convection in Hydrocarbon Under Flowing Conditions

2021 ◽  
Author(s):  
Trine S. Mykkeltvedt ◽  
Sarah E. Gasda ◽  
Tor Harald Sandve
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Flow Behavior ◽  
Cost Effective ◽  
Fine Grid ◽  
Cost Effective Method ◽  
Gravity Effects ◽  
Petroleum Resources ◽  
Nearby Point ◽  
Diffusive Processes

AbstractCarbon-neutral oil production is one way to improve the sustainability of petroleum resources. The emissions from produced hydrocarbons can be offset by injecting capture CO$$_{2}$$ 2 from a nearby point source into a saline aquifer for storage or a producing oil reservoir. The latter is referred to as enhanced oil recovery (EOR) and would enhance the economic viability of CO$$_{2}$$ 2 sequestration. The injected CO$$_{2}$$ 2 will interact with the oil and cause it to flow more freely within the reservoir. Consequently, the overall recovery of oil from the reservoir will increase. This enhanced oil recovery (EOR) technique is perceived as the most cost-effective method for disposing captured CO$$_{2}$$ 2 emissions and has been performed for many decades with the focus on oil recovery. The interaction between existing oil and injected CO$$_{2}$$ 2 needs to be fully understood to effectively manage CO$$_{2}$$ 2 migration and storage efficiency. When CO$$_{2}$$ 2 and oil mix in a fully miscible setting, the density can change non-linearly and cause density instabilities. These instabilities involve complex convective-diffusive processes, which are hard to model and simulate. The interactions occur at the sub-centimeter scale, and it is important to understand its implications for the field scale migration of CO$$_{2}$$ 2 and oil. In this work, we simulate gravity effects, namely gravity override and convective mixing, during miscible displacement of CO$$_{2}$$ 2 and oil. The flow behavior due to the competition between viscous and gravity effects is complex, and can only be accurately simulated with a very fine grid. We demonstrate that convection occurs rapidly, and has a strong effect on breakthrough of CO$$_{2}$$ 2 at the outlet. This work for the first time quantifies these effects for a simple system under realistic conditions.

scholarly journals Breccia interlayer effects on steam-assisted gravity drainage performance: experimental and numerical study

2021 ◽  
Author(s):  
Qichen Zhang ◽  
Xiaodong Kang ◽  
Huiqing Liu ◽  
Xiaohu Dong ◽  
Jian Wang
Keyword(s):  
Numerical Simulation ◽  
Oil Recovery ◽  
Oil Sands ◽  
Numerical Study ◽  
Middle Part ◽  
Experimental Results ◽  
Production Performance ◽  
Peak Oil ◽  
Steam Chamber ◽  
The Impact

AbstractCurrently, the reservoir heterogeneity is a serious challenge for developing oil sands with SAGD method. Nexen’s Long Lake SAGD project reported that breccia interlayer was widely distributed in lower and middle part of reservoir, impeding the steam chamber expansion and heated oil drainage. In this paper, two physical experiments were conducted to study the impact of breccia interlayer on development of steam chamber and production performance. Then, a laboratory scale numerical simulation model was established and a history match was conducted based on the 3D experimental results. Finally, the sensitivity analysis of thickness and permeability of breccia layer was performed. The influence mechanism of breccia layer on SAGD performance was analyzed by comparing the temperature profile of steam chamber and production dynamics. The experimental results indicate that the existence of breccia interlayer causes a thinner steam chamber profile and longer time to reach the peak oil rate. And, the ultimate oil recovery reduced 15.8% due to much oil stuck in breccia interlayer areas. The numerical simulation results show that a lower permeability in breccia layer area has a serious adverse impact on oil recovery if the thickness of breccia layer is larger, whereas the effect of permeability on SAGD performance is limited when the breccia layer is thinner. Besides, a thicker breccia layer can increase the time required to reach the peak oil rate, but has a little impact on the ultimate oil recovery.

Impact of Matrix Block Size on Oil Recovery Response Using Surfactants in Fractured Carbonates

2012 ◽  
Author(s):  
Ali Goudarzi ◽  
Mojdeh Delshad ◽  
Kishore K. Mohanty ◽  
Kamy Sepehrnoori
Keyword(s):  
Oil Recovery ◽  
Block Size ◽  
Matrix Block ◽  
Recovery Response ◽  
Fractured Carbonates

scholarly journals Compositional Modeling for Optimum Design of Water-Alternating CO2-LPG EOR under Complicated Wettability Conditions

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Jinhyung Cho ◽  
Sung Soo Park ◽  
Moon Sik Jeong ◽  
Kun Sang Lee
Keyword(s):  
Interfacial Tension ◽  
Mole Fraction ◽  
Oil Recovery ◽  
Net Present Value ◽  
Numerical Study ◽  
Present Value ◽  
Compositional Simulation ◽  
Maximum Enhancement ◽  
Tension Reduction ◽  
Improved Oil Recovery

The addition of LPG to the CO2stream leads to minimum miscible pressure (MMP) reduction that causes more oil swelling and interfacial tension reduction compared to CO2EOR, resulting in improved oil recovery. Numerical study based on compositional simulation has been performed to examine the injectivity efficiency and transport behavior of water-alternating CO2-LPG EOR. Based on oil, CO2, and LPG prices, optimum LPG concentration and composition were designed for different wettability conditions. Results from this study indicate how injected LPG mole fraction and butane content in LPG affect lowering of interfacial tension. Interfacial tension reduction by supplement of LPG components leads to miscible condition causing more enhanced oil recovery. The maximum enhancement of oil recovery for oil-wet reservoir is 50% which is greater than 22% for water-wet reservoir. According to the result of net present value (NPV) analysis at designated oil, CO2, propane, and butane prices, the optimal injected LPG mole fraction and composition exist for maximum NPV. At the case of maximum NPV for oil-wet reservoir, the LPG fraction is about 25% in which compositions of propane and butane are 37% and 63%, respectively. For water-wet reservoir, the LPG fraction is 20% and compositions of propane and butane are 0% and 100%.

A Laboratory and Numerical-Simulation Study of Co-Optimizing CO2 Storage and CO2 Enhanced Oil Recovery

SPE Journal ◽  
2015 ◽  
Vol 20 (06) ◽  
pp. 1227-1237 ◽  
Author(s):  
Fatemeh Kamali ◽  
Furqan Hussain ◽  
Yildiray Cinar
Keyword(s):  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Co2 Storage ◽  
Immiscible Displacement ◽  
Sandstone Sample ◽  
Miscible Displacements ◽  
Gravity Effects ◽  
Optimization Function ◽  
Carbon Dioxide Co2 ◽  
And Storage

Summary This paper presents experimental observations that delineate co-optimization of carbon dioxide (CO2) enhanced oil recovery (EOR) and storage. Pure supercritical CO2 is injected into a homogeneous outcrop sandstone sample saturated with oil and immobile water under various miscibility conditions. A mixture of hexane and decane is used for the oil phase. Experiments are run at 70°C and three different pressures (1,300, 1,700, and 2,100 psi). Each pressure is determined by use of a pressure/volume/temperature simulator to create immiscible, near-miscible, and miscible displacements. Oil recovery, differential pressure, and compositions are recorded during experiments. A co-optimization function for CO2 storage and incremental oil is defined and calculated using the measured data for each experiment. A compositional reservoir simulator is then used to examine gravity effects on displacements and to derive relative permeabilities. Experimental observations demonstrate that almost similar oil recovery is achieved during miscible and near-miscible displacements whereas approximately 18% less recovery is recorded in the immiscible displacement. More heavy component (decane) is recovered in the miscible and near-miscible displacements than in the immiscible displacement. The co-optimization function suggests that the near-miscible displacement yields the highest CO2-storage efficiency and displays the best performance for coupling CO2 EOR and storage. Numerical simulations show that, even on the laboratory scale, there are significant gravity effects in the near-miscible and miscible displacements. It is revealed that the near-miscible and miscible recoveries depend strongly on the endpoint effective CO2 permeability.

Secondary Oil Recovery by Water Injection: A Numerical Study

2013 ◽  
Vol 334-335 ◽  
pp. 83-88
Author(s):  
A. de Lima Cunha ◽  
Severino Rodrigues de Farias Neto ◽  
Antônio Gilson Barbosa de Lima ◽  
E. Santos Barbosa
Keyword(s):  
Oil Recovery ◽  
Numerical Study ◽  
Water Injection ◽  
Recovery Process ◽  
Recovery Factor ◽  
Oil Reservoir ◽  
Isothermal Process ◽  
Ansys Cfx ◽  
Commercial Package ◽  
Secondary Oil Recovery

In this work we carried out a numerical study of the heavy oil recovery process in oil reservoir through water injection. We performed transient tridimensional numerical simulations, considering an isothermal process, with a variation in the position of water injection section (interior and surface) in the reservoir, using the ANSYS CFX 11 commercial package and evaluated its effects on the recovery factor of oil. The numerical results showed that varying the flow rate of water injection from 0.10 to 0.25 kg/s there was an increase in the flow of water and oil produced in 193% and 28%, respectively, and the recovery factor in 16.7%

Sign in / Sign up

Export Citation Format

Share Document