scholarly journals New Operational Support System for High Nitrogen Removal in Batch Type Activated Sludge Process Using Intermittent Aeration.

1996 ◽  
Vol 32 (4) ◽  
pp. 235-245
Author(s):  
SEIJI FURUKAWA ◽  
JUNJI HIROTSUJI ◽  
AKIRA IKEDA ◽  
SATORU SHIONO
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Support System ◽  
Activated Sludge Process ◽  
Intermittent Aeration ◽  
High Nitrogen ◽  
Batch Type ◽  
Operational Support System

scholarly journals Characteristics of N2O Emission and Nitrogen Removal at A DO Controlled Intermittent Aeration Activated Sludge Process.

1998 ◽  
Vol 34 (2) ◽  
pp. 1-14 ◽  
Author(s):  
YUZURU KIMOCHI ◽  
YUHEI INAMORI ◽  
NOBORU FURUYA ◽  
TOICHI EBISUNO ◽  
MASATOSHI MATSUMURA
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
N2o Emission ◽  
Activated Sludge Process ◽  
Intermittent Aeration

Mechanism and design of intermittent aeration activated sludge process for nitrogen removal

2011 ◽  
Vol 46 (1) ◽  
pp. 9-16 ◽  
Author(s):  
Oytun Hanhan ◽  
Güçlü Insel ◽  
Nevin Ozgur Yagci ◽  
Nazik Artan ◽  
Derin Orhon
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Activated Sludge Process ◽  
Intermittent Aeration

Effect of loading rate and intermittent aeration cycle on nitrogen removal in membrane separation activated sludge process

2002 ◽  
Vol 46 (8) ◽  
pp. 119-126 ◽  
Author(s):  
H. Nagaoka ◽  
C. Kudo
Keyword(s):  
Activated Sludge ◽  
Nitrogen Removal ◽  
Loading Rate ◽  
Membrane Separation ◽  
Organic Loading Rate ◽  
Aeration Tank ◽  
Activated Sludge Process ◽  
Intermittent Aeration ◽  
Organic Loading ◽  
Mixed Liquor

The performance of the submerged membrane separation activated sludge process with intermittent aeration was investigated in a laboratory scale experiment by changing organic loading rate and intermittent aeration cycle. A rectangular PVC tank was used as an aeration tank, in which a flat-sheet type Micro-Filtration membrane made of poly-olefin with a pore size of 0.2 mm was submerged. Organic loading rate to the reactor was set at 0.3 and 0.8 g-TOC/L/day. C/N ratio in the feed was set at around 5.0 for every condition. Aeration cycle was changed from 10 min-10 min (aeration - stop) to 120 min-120 min in different organic loading conditions. Flux through the membrane was set at 0.25 m/day. Membrane fouling proceeded rapidly in 0.8 g-TOC/L/day conditions. However, when organic loading rate was 0.3 g-TOC/L/day, bacterial metabolic substances were degraded rapidly compared to the production, thereby decreasing viscosity in mixed liquor. Nitrogen removal rate was between 60% and 80% for 0.8 g-TOC/L/day loading, and between 50% and 65% for 0.3 g-TOC/L/day loading. And the nitrogen removal was highest in 40 min to 60 min aeration cycle conditions. Too short aeration cycle did not result in sufficiently long anoxic periods for denitrification while too long a cycle resulted in unnecessary anaerobic periods after depletion of nitrate. Intermittent aeration was effective also for decreasing viscosity in mixed liquor.

Process evaluation of HASP with IMET system through SNR and SDNR for the efficient management of Sewage Treatment Plant

2008 ◽  
Vol 3 (1) ◽  
Author(s):  
Young H. Yoon ◽  
Jae R. Park ◽  
Sang W. Ahn ◽  
Kwang B. Ko ◽  
Kyung J. Min ◽  
...  
Keyword(s):  
Activated Sludge ◽  
Linear Regression Analysis ◽  
Sewage Treatment Plant ◽  
Treatment Plant ◽  
Reaction Rates ◽  
Nitrification Rate ◽  
Activated Sludge Process ◽  
Type Experiment ◽  
Batch Type ◽  
Nitrification And Denitrification

Hybrid Activated Sludge Process (HASP) with IMET was developed and applied to an activated sludge process for the advanced nutrient treatment in Korea. The characteristics of nitrogen removal from the HASP were investigated through a kinetic study by batch-type experiment. Online DB analysis produced from the IMET was conducted for the nutrient removal performance in the field demonstration plant treating 10,000 m3/day in G city of Korea. In this paper, we aimed to determine the effect of increasing NHM4+-N load on the specific nitrification rate (SNR) and the specific denitrification rate (SDNR) through a batch-type experiment, and to estimate the net reaction time for the phase-transfer rate using online DB analysis in the HASP operation. Experimental results include: (1) both the nitrification and denitrification followed first-order kinetics; (2) the maximum SNR and SDNR were 4.0301 mgN/gVSS·hr and 2.785 mgN/gVSS·hr, respectively; (3) comparison of reaction rates between nitrification and denitrification from the non-linear regression analysis found that nitrification rate was higher than denitrification.

Operational Results of the Wolfsburg Wastewater Treatment Plant

1992 ◽  
Vol 25 (4-5) ◽  
pp. 203-209 ◽  
Author(s):  
R. Kayser ◽  
G. Stobbe ◽  
M. Werner
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Nitrogen Content ◽  
Total Nitrogen ◽  
Nitrogen Removal ◽  
Wastewater Treatment Plant ◽  
Treatment Plant ◽  
Phosphate Removal ◽  
Total Nitrogen Content ◽  
Activated Sludge Process

At Wolfsburg for a load of 100,000 p.e., the step-feed activated sludge process for nitrogen removal is successfully in operation. Due to the high denitrification potential (BOD:TKN = 5:1) the effluent total nitrogen content can be kept below 10 mg l−1 N; furthermore by some enhanced biological phosphate removal about 80% phosphorus may be removed without any chemicals.

Sign in / Sign up

Export Citation Format

Share Document