scholarly journals Absorption of H2S and CO2in Alkanolamine Aqueous Solution: Experimental Data and Modelling with the Electrolyte-NRTL Model

2006 ◽  
Vol 61 (3) ◽  
pp. 345-361 ◽  
Author(s):  
A. Barreau ◽  
E. Blanchon le Bouhelec ◽  
K.N. Habchi Tounsi ◽  
P. Mougin ◽  
F. Lecomte
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Nrtl Model ◽  
Electrolyte Nrtl

Utilization of Waste of Enzymes Biomass as Biosorbent for the Removal of Dyes from Aqueous Solution in Batch and Fluidized Bed Column

2020 ◽  
Vol 71 (1) ◽  
pp. 1-12
Author(s):  
Salman H. Abbas ◽  
Younis M. Younis ◽  
Mohammed K. Hussain ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Fluidized Bed ◽  
Flow Rate ◽  
Fungal Biomass ◽  
Solution Flow Rate ◽  
Maximum Adsorption Capacity ◽  
Solution Flow

The biosorption performance of both batch and liquid-solid fluidized bed operations of dead fungal biomass type (Agaricusbisporus ) for removal of methylene blue from aqueous solution was investigated. In batch system, the adsorption capacity and removal efficiency of dead fungal biomass were evaluated. In fluidized bed system, the experiments were conducted to study the effects of important parameters such as particle size (701-1400�m), initial dye concentration(10-100 mg/L), bed depth (5-15 cm) and solution flow rate (5-20 ml/min) on breakthrough curves. In batch method, the experimental data was modeled using several models (Langmuir,Freundlich, Temkin and Dubinin-Radushkviechmodels) to study equilibrium isotherms, the experimental data followed Langmuir model and the results showed that the maximum adsorption capacity obtained was (28.90, 24.15, 21.23 mg/g) at mean particle size (0.786, 0.935, 1.280 mm) respectively. In Fluidized-bed method, the results show that the total ion uptake and the overall capacity will be decreased with increasing flow rate and increased with increasing initial concentrations, bed depth and decreasing particle size.

Capillary flows and self-assembly of porous hydrate structures

2012 ◽  
Vol 9 (1) ◽  
pp. 22-25
Author(s):  
S.V. Amel’kin ◽  
D.Ye. Igoshin
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Self Assembly ◽  
Capillary Flow ◽  
Secondary Crystallization ◽  
Assembly Model ◽  
Physical Processes ◽  
Good Correspondence ◽  
Solution Formation ◽  
Capillary Flows

A self-assembly model for porous hydrate structures is proposed, which takes into account the sequence of basic physical processes: hydrate growth on the surface of the aqueous solution, formation of islet structure, capillary flow, separation and transfer of secondary crystallization nuclei to the meniscus. The model was studied within the cellular automata method. A good correspondence between the results of the simulation and the experimental data is obtained.

Separation of phenylenediamine isomers by using decamethylcucurbit[5]uril

2021 ◽  
Author(s):  
Long Cao ◽  
Han-Ling Guo ◽  
Rui Lian Lin ◽  
Li-Fei Tian ◽  
Zhi-Hua Zhang ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Solid State ◽  
Phenylenediamine Isomers

Using multiple techniques, this work studied the binding behaviors of decamethylcucurbit[5]uril (Me10Q[5]) with o-, m- and p-phenylenediamine (PDA) isomers both in solid state and in aqueous solution. Experimental data indicate...

Preparation of crosslinked chitosan magnetic membrane for cations sorption from aqueous solution

2017 ◽  
Vol 75 (9) ◽  
pp. 2034-2046 ◽  
Author(s):  
Adnan Khan ◽  
Samina Begum ◽  
Nauman Ali ◽  
Sabir Khan ◽  
Sajjad Hussain ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Adsorption Capacity ◽  
Magnetic Particles ◽  
Isotherm Models ◽  
Chitosan Membrane ◽  
Dilute Aqueous Solution ◽  
Chitosan Membranes ◽  
The Fourier Transform ◽  
Time Required

A chitosan magnetic membrane was prepared in order to confer magnetic properties to the membrane, which could be used for the removal of cations from aqueous solution. The crosslinked magnetic membrane was compared with pristine chitosan membrane in term of stability, morphology and cation adsorption capacity. The fabricated magnetic materials are thermally stable as shown by thermogravimetric curves. The membrane containing nickel magnetic particles (CHNiF-G) shows high thermal stability compared to the other membranes. The Fourier transform infrared spectroscopy showed successful preparation of chitosan magnetic membrane. Scanning electron microscopy micrographs showed the rough surface of the membrane with increased porosity. The prepared chitosan membranes were applied to cations of copper, nickel and lead in dilute aqueous solution. The chitosan membrane showed the following adsorption order for metallic cations: Cu2+ > Ni2+ > Pb2+, while CHNiF-G showed higher capacity, 3.51 mmol g−1 for copper, reflecting the improvement in adsorption capacity, since the amount of copper on pristine chitosan gave 1.40 mmol g−1. The time required for adsorption to reach to the equilibrium was 6 h for the selected cations using different chitosan membranes. The kinetic study showed that adsorption followed pseudo-second order kinetics. The most commonly used isotherm models, Freundlich, Langmuir and Temkin, were applied to experimental data using linear regression technique. However, The Temkin model fits better to experimental data.

scholarly journals MOLECULAR MECHANISM OF RELAXATION ABSORPTION OF ULTRASONIC WAVES IN AN AQUEOUS SOLUTION OF CALCIUM ACETATE

InterConf ◽  
2021 ◽  
pp. 970-978
Author(s):  
Z. Nizomov ◽  
M. Asozoda ◽  
A. Olimi ◽  
A. Karimzoda
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Sodium Chloride ◽  
Sodium Acetate ◽  
Ultrasonic Waves ◽  
Calcium Acetate ◽  
Acetate Anion ◽  
Frequency Range ◽  
Calcium Cations ◽  
Calcium Cation

The absorption of ultrasonic waves in the frequency range from 6 to 146 MHz in aqueous solutions of sodium acetate, sodium chloride and calcium has been studied. It was found that only in solutions of calcium cations and acetate anion present simultaneously, relaxation absorption of ultrasonic waves is observed. The experimental data obtained indicate that the observed relaxation absorption of ultrasound in the studied frequency range by an aqueous solution of calcium acetate is associated with the interaction of the acetate anion with the calcium cation in the solution.

scholarly journals Molecular modeling of post-diffusion stage of biotissue optical clearing under effect of iohexol aqueous solution

2021 ◽  
Vol 2103 (1) ◽  
pp. 012048
Author(s):  
I T Shagautdinova ◽  
A M Likhter ◽  
K V Berezin ◽  
K N Dvoretsky ◽  
V V Nechaev ◽  
...  
Keyword(s):  
Experimental Data ◽  
Molecular Dynamics ◽  
Aqueous Solution ◽  
Molecular Modeling ◽  
Biological Tissues ◽  
Optical Clearing ◽  
X Ray ◽  
Diffusion Stage ◽  
Collagen Peptide ◽  
Main Components

Abstract Interaction of iohexol (Omnipaque), an X-Ray contrast agent, with a mimetic peptide of collagen (GPH)3 as one of the main components of biological tissues has been studied with the use of methods of classical molecular dynamics (GROMACS). Complex molecular modeling of the post-diffusion stage of optical clearing allowed to evaluate such parameters as the average number of hydrogen bonds, formed between the clearing agent and collagen per unit time, and the immersion agent’s effect on changes in the collagen peptide volume. The obtained results are compared with similar results for glycerol, a polyatomic alcohol, and with the existing experimental data on the efficiency of optical clearing of these immersion agents.

Sign in / Sign up

Export Citation Format

Share Document