Differential Equation of Compressible Turbulent Skin-Friction Coefficient Around an Arbitrary Body of Revolution at High Speed

1960 ◽  
Vol 27 (6) ◽  
pp. 466-467
Author(s):  
Paul K. Chang
Keyword(s):  
Differential Equation ◽  
Friction Coefficient ◽  
Skin Friction ◽  
High Speed ◽  
Skin Friction Coefficient ◽  
Body Of Revolution ◽  
Arbitrary Body

Effects of partial slip on axisymmetric flow of an electrically conducting viscoelastic fluid past a stretching sheet

Open Physics ◽  
2010 ◽  
Vol 8 (3) ◽  
Author(s):  
Bikash Sahoo
Keyword(s):  
Differential Equation ◽  
Friction Coefficient ◽  
Boundary Conditions ◽  
Skin Friction ◽  
Skin Friction Coefficient ◽  
Partial Slip ◽  
Second Grade ◽  
Second Grade Fluid ◽  
Electrically Conducting ◽  
Grade Fluid

AbstractThe entrained flow of an electrically conducting non-Newtonian, viscoelastic second grade fluid due to an axisymmetric stretching surface with partial slip is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero (total adhesion) and infinity (full slip). Suitable similarity transformations are used to reduce the resulting highly nonlinear partial differential equation into an ordinary differential equation. The issue of paucity of boundary conditions is addressed, and an effective numerical scheme has been adopted to solve the obtained differential equation even without augmenting the boundary conditions. The important findings in this communication are the combined effects of the partial slip, magnetic interaction parameter and the second grade fluid parameter on the velocity and skin friction coefficient. It is observed that in presence of slip, the velocity decreases with an increase in the magnetic parameter. That is, the Lorentz force which opposes the flow leads to enhanced deceleration of the flow. Moreover, it is interesting to find that as slip increases in magnitude, permitting more fluid to slip past the sheet, the skin friction coefficient decreases in magnitude and approaches zero for higher values of the slip parameter, i.e., the fluid behaves as though it were inviscid.

scholarly journals Duality Solutions in Hydromagnetic Flow of SWCNT-MWCNT/Water Hybrid Nanofluid over Vertical Moving Slender Needle

Mathematics ◽  
2021 ◽  
Vol 9 (22) ◽  
pp. 2927
Author(s):  
Nur Adilah Liyana Aladdin ◽  
Norfifah Bachok
Keyword(s):  
Heat Transfer ◽  
Differential Equation ◽  
Carbon Nanotube ◽  
Friction Coefficient ◽  
Mixed Convection ◽  
Skin Friction ◽  
Volume Fraction ◽  
Skin Friction Coefficient ◽  
Convection Boundary Layer ◽  
Hybrid Nanofluid

Recently, the topic of convection of heat transfer has created an interest among researchers because of its numerous applications in the daily life. The objective of this paper was to study theoretically the problem of mixed convection boundary layer flow and heat transfer of single-wall carbon nanotube (SWCNT) and multi-wall carbon nanotube (MWCNT) in presence of hydromagnetic effects. The problem was initiated by formulating a mathematical model in partial differential equation (PDE) for the hybrid nanofluid flow with appropriate boundary conditions. The similarity equation was used to transform the PDE into an ordinary differential equation (ODE) and solved using bvp4c in MATLAB. The graphical results on variation of skin friction coefficient, , local Nusselt number, , shear stress, and local heat flux, with the effects of magnetic, size of needle, c, mixed convection parameter, and volume fraction of nanoparticles, were presented and discussed in detail. The study revealed that duality of solutions appears when the buoyance force is in opposing flow of the fluid motion, The presence of M in hybrid nanofluid reduced the skin friction coefficient and heat transfer. On the other hand, the and increased as different concentrations of and c were added. It gives an insight into the medical field, especially in treating cancer cells. By means, it reveals that CNTs hybrid nanofluid shows high potential in reaching the site of tumors faster compared with nanofluid. A stability analysis has to be carried out. It is noticed that the first solution was stable and physically realizable.

Impact of viscosity variation on oblique flow of Cu–H2O nanofluid

2017 ◽  
Vol 232 (5) ◽  
pp. 622-631 ◽  
Author(s):  
R Tabassum ◽  
Rashid Mehmood ◽  
O Pourmehran ◽  
NS Akbar ◽  
M Gorji-Bandpy
Keyword(s):  
Heat Flux ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Volume Fraction ◽  
Variable Viscosity ◽  
Solid Volume Fraction ◽  
Local Heat ◽  
Skin Friction Coefficient ◽  
Viscosity Parameter ◽  
Local Heat Flux

The dynamic properties of nanofluids have made them an area of intense research during the past few decades. In this article, flow of nonaligned stagnation point nanofluid is investigated. Copper–water based nanofluid in the presence of temperature-dependent viscosity is taken into account. The governing nonlinear coupled ordinary differential equations transformed by partial differential equations are solved numerically by using fourth-order Runge–Kutta–Fehlberg integration technique. Effects of variable viscosity parameter on velocity and temperature profiles of pure fluid and copper–water nanofluid are analyzed, discussed, and presented graphically. Streamlines, skin friction coefficients, and local heat flux of nanofluid under the impact of variable viscosity parameter, stretching ratio, and solid volume fraction of nanoparticles are also displayed and discussed. It is observed that an increase in solid volume fraction of nanoparticles enhances the magnitude of normal skin friction coefficient, tangential skin friction coefficient, and local heat flux. Viscosity parameter is found to have decreasing effect on normal and tangential skin friction coefficients whereas it has a positive influence on local heat flux.

Low-Reynolds-Number Turbulent Boundary Layers in Zero and Favorable Pressure Gradients

1983 ◽  
Vol 27 (03) ◽  
pp. 147-157 ◽  
Author(s):  
A. J. Smits ◽  
N. Matheson ◽  
P. N. Joubert
Keyword(s):  
Friction Coefficient ◽  
Skin Friction ◽  
Boundary Layers ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Skin Friction Coefficient ◽  
Turbulent Boundary Layers ◽  
Pressure Gradients ◽  
Mean Flow ◽  
Low Reynolds

This paper reports the results of an extensive experimental investigation into the mean flow properties of turbulent boundary layers with momentum-thickness Reynolds numbers less than 3000. Zero pressure gradient and favorable pressure gradients were studied. The velocity profiles displayed a logarithmic region even at very low Reynolds numbers (as low as Rθ = 261). The results were independent of the leading-edge shape, and the pin-type turbulent stimulators performed well. It was found that the shape and Clauser parameters were a little higher than the correlation proposed by Coles [10], and the skin friction coefficient was a little lower. The skin friction coefficient behavior could be fitted well by a simple power-law relationship in both zero and favorable pressure gradients.

Nanofluid flow past an impulsively started vertical plate with variable surface temperature

2016 ◽  
Vol 26 (1) ◽  
pp. 328-347 ◽  
Author(s):  
Rajesh Vemula ◽  
A J Chamkha ◽  
Mallesh M. P.
Keyword(s):  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Vertical Plate ◽  
Aluminium Oxide ◽  
Skin Friction Coefficient ◽  
Viscous Drag ◽  
Content Type ◽  
Variable Surface ◽  
Variable Surface Temperature

Purpose – The purpose of this paper is to focus on the numerical modelling of transient natural convection flow of an incompressible viscous nanofluid past an impulsively started semi-infinite vertical plate with variable surface temperature. Design/methodology/approach – The problem is governed by the coupled non-linear partial differential equations with appropriate boundary conditions. A robust, well-tested, Crank-Nicolson type of implicit finite-difference method, which is unconditionally stable and convergent, is used to solve the governing non-linear set of partial differential equations. Findings – The local and average values of the skin-friction coefficient (viscous drag) and the average Nusselt number (the rate of heat transfer) decreased, while the local Nusselt number increased for all nanofluids, namely, aluminium oxide-water, copper-water, titanium oxide-water and silver-water with an increase in the temperature exponent m. Selecting aluminium oxide as the dispersing nanoparticles leads to the maximum average Nusselt number (the rate of heat transfer), while choosing silver as the dispersing nanoparticles leads to the minimum local Nusselt number compared to the other nanofluids for all values of the temperature exponent m. Also, choosing silver as the dispersing nanoparticles leads to the minimum skin-friction coefficient (viscous drag), while selecting aluminium oxide as the dispersing nanoparticles leads to the maximum skin-friction coefficient (viscous drag) for all values of the temperature exponent m. Research limitations/implications – The Brinkman model for dynamic viscosity and Maxwell-Garnett model for thermal conductivity are employed. The governing boundary layer equations are written according to The Tiwari-Das nanofluid model. A range of nanofluids containing nanoparticles of aluminium oxide, copper, titanium oxide and silver with nanoparticle volume fraction range less than or equal to 0.04 are considered. Practical implications – The present simulations are relevant to nanomaterials thermal flow processing in the chemical engineering and metallurgy industries. This study also provides an important benchmark for further simulations of nanofluid dynamic transport phenomena of relevance to materials processing, with alternative computational algorithms (e.g. finite element methods). Originality/value – This paper is relatively original and illustrates the influence of variable surface temperature on transient natural convection flow of a viscous incompressible nanofluid and heat transfer from an impulsively started semi-infinite vertical plate.

Air Blowing Into Boundary Layer Of A Flat Plate With Length-Dependent Permeability

2016 ◽  
Vol 11 (3) ◽  
pp. 16-26
Author(s):  
Vladimir Kornilov ◽  
Andrey Boiko ◽  
Ivan Kavun ◽  
Anatoliy Popkov
Keyword(s):  
Boundary Layer ◽  
Friction Coefficient ◽  
Flat Plate ◽  
Skin Friction ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Skin Friction Coefficient ◽  
Air Blowing ◽  
The Mean

A generalized analysis of the results of numerical and experimental studies of air blowing into a turbulent boundary layer through finely perforated surface consisting of alternating permeable and impermeable sections of varying length providing a sudden change in the flow conditions at the boundaries of these sections is presented. The air blowing coefficient Cb determined by the mass flow rate per unit area of the active perforated sample varied in the range from 0 to 0.008. It is shown that as Cb grows, the maximum reduction in the mean surface skin-friction coefficient CF, which is the value through the permeable area of perforated sample, reaches about 65 %. When keeping the equal mass flow rate Q for all tested combinations, the mean skin-friction coefficient remains constant, independent of geometrical parameters of permeable and impermeable sections. Increasing the length of the last permeable section leads to the growth of relaxation region which is characterized by the reduced skin friction values on the impermeable part of the flat plate.

Hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface

2019 ◽  
Vol 29 (9) ◽  
pp. 3110-3127 ◽  
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Friction Coefficient ◽  
Skin Friction ◽  
Local Nusselt Number ◽  
Skin Friction Coefficient ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

PurposeThis paper aims to investigate the steady flow and heat transfer of a Cu-Al2O3/water hybrid nanofluid over a nonlinear permeable stretching/shrinking surface with radiation effects. The surface velocity condition is assumed to be of the power-law form with an exponent of 1/3. The governing equations of the problem are converted into a system of similarity equations by using a similarity transformation.Design/methodology/approachThe problem is solved numerically using the boundary value problem solver (bvp4c) in Matlab software. The results of the skin friction coefficient and the local Nusselt number as well as the velocity and temperature profiles are presented through graphs and tables for several values of the parameters. The effects of these parameters on the flow and heat transfer characteristics are examined and discussed.FindingsResults found that dual solutions exist for a certain range of the stretching/shrinking and suction parameters. The increment of the skin friction coefficient and reduction of the local Nusselt number on the shrinking sheet is observed with the increasing of copper (Cu) nanoparticle volume fractions for the upper branch. The skin friction coefficient and the local Nusselt number increase when suction parameter is increased for the upper branch. Meanwhile, the temperature increases in the presence of the radiation parameter for both branches.Originality/valueThe problem of Cu-Al2O3/water hybrid nanofluid flow and heat transfer over a nonlinear permeable stretching/shrinking surface with radiation effects is the important originality of the present study where the dual solutions for the flow reversals are obtained.

Sign in / Sign up

Export Citation Format

Share Document