Remarks on "Shock-Wave Effects on the Laminar Skin Friction of an Insulated Flat Plate at Hypersonic Speeds"

1953 ◽  
Vol 20 (11) ◽  
pp. 799-800
Author(s):  
M. Z. v. Krzywoblocki
Keyword(s):  
Shock Wave ◽  
Flat Plate ◽  
Skin Friction ◽  
Wave Effects ◽  
Hypersonic Speeds

Electron microscopy study of shock synthesis of silicides

1993 ◽  
Vol 51 ◽  
pp. 1162-1163
Author(s):  
Kenneth S. Vecchio
Keyword(s):  
Shock Wave ◽  
Plastic Deformation ◽  
Close Contact ◽  
Microscopy Study ◽  
High Energy ◽  
Electron Microscopy Study ◽  
Powder Materials ◽  
Porous Powder ◽  
Wave Effects ◽  
Wave Passage

Shock-induced reactions (or shock synthesis) have been studied since the 1960’s but are still poorly understood, partly due to the fact that the reaction kinetics are very fast making experimental analysis of the reaction difficult. Shock synthesis is closely related to combustion synthesis, and occurs in the same systems that undergo exothermic gasless combustion reactions. The thermite reaction (Fe2O3 + 2Al -> 2Fe + Al2O3) is prototypical of this class of reactions. The effects of shock-wave passage through porous (powder) materials are complex, because intense and non-uniform plastic deformation is coupled with the shock-wave effects. Thus, the particle interiors experience primarily the effects of shock waves, while the surfaces undergo intense plastic deformation which can often result in interfacial melting. Shock synthesis of compounds from powders is triggered by the extraordinarily high energy deposition rate at the surfaces of the powders, forcing them in close contact, activating them by introducing defects, and heating them close to or even above their melting temperatures.

Shock wave effects during a Taylor test

2006 ◽  
Vol 134 ◽  
pp. 1065-1070
Author(s):  
E. Lach ◽  
M. Scharf
Keyword(s):  
Shock Wave ◽  
Taylor Test ◽  
Wave Effects

Direct total skin-friction measurement of a flat plate in zero-pressure-gradient boundary layers

2009 ◽  
Vol 41 (2) ◽  
pp. 021406 ◽  
Author(s):  
Kiyoto Mori ◽  
Hiroki Imanishi ◽  
Yoshiyuki Tsuji ◽  
Tomohiro Hattori ◽  
Masaharu Matsubara ◽  
...  
Keyword(s):  
Pressure Gradient ◽  
Flat Plate ◽  
Skin Friction ◽  
Boundary Layers ◽  
Friction Measurement

Analysis Techniques for Modeling the Pressure Wave Effects of Guillotine Ruptures of Steam Lines

2011 ◽  
Author(s):  
Charles Becht ◽  
Frederick J. Moody
Keyword(s):  
Shock Wave ◽  
Propagation Model ◽  
Shock Propagation ◽  
Cfd Model ◽  
Analysis Techniques ◽  
Wave Effects ◽  
Fluid Properties ◽  
Potential Damage ◽  
Pipe Geometry ◽  
Propagation Properties

The rupture of a pipe containing gas or steam at high pressure will cause a shock wave. In order to assess the potential damage that such a shock wave may cause to the surrounding structures, systems and components, it is necessary to determine the amplitude and propagation properties of the shock. A CFD model has been developed for the purpose of predicting shock propagation transients resulting from a sudden pipe rupture in terms of the fluid properties, pipe geometry, and surroundings. A simplified shock propagation model also is included, which offers verification of the CFD model results.

Skin friction and surface temperature of an insulated flat plate fixed in a fluctuating stream

1971 ◽  
Vol 46 (1) ◽  
pp. 165-175 ◽  
Author(s):  
Hiroshi Ishigaki
Keyword(s):  
Boundary Layer ◽  
Surface Temperature ◽  
Flat Plate ◽  
Skin Friction ◽  
High Frequency ◽  
Energy Equation ◽  
Oscillation Amplitude ◽  
Flow Oscillation ◽  
Velocity Amplitude ◽  
The Mean

The time-mean skin friction of the laminar boundary layer on a flat plate which is fixed at zero incidence in a fluctuating stream is investigated analytically. Flow oscillation amplitude outside the boundary layer is assumed constant along the surface. First, the small velocity-amplitude case is treated, and approximate formulae are obtained in the extreme cases when the frequency is low and high. Next, the finite velocity-amplitude case is treated under the condition of high frequency, and it is found that the formula obtained for the small-amplitude and high-frequency case is also valid. These results show that the increase of the mean skin friction reduces with frequency and is ultimately inversely proportional to the square of frequency.The corresponding energy equation is also studied simultaneously under the condition of zero heat transfer between the fluid and the surface. It is confirmed that the time-mean surface temperature increases with frequency and tends to be proportional to the square root of frequency. Moreover, it is shown that the timemean recovery factor can be several times as large as that without flow oscillation.

Application of Air Microblowing Through a Porous Wall for Skin Friction Reduction on a Flat Plate

2010 ◽  
Vol 5 (3) ◽  
pp. 38-46
Author(s):  
Vladimir I. Kornilov ◽  
Andrey V. Boiko
Keyword(s):  
Boundary Layer ◽  
Flat Plate ◽  
Skin Friction ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Porous Wall ◽  
Friction Reduction ◽  
Local Skin ◽  
Skin Friction Reduction

The effect of air microblowing through a porous wall on the properties of a turbulent boundary layer formed on a flat plate in an incompressible flow is studied experimentally. The Reynolds number based on the momentum thickness of the boundary layer in front of the porous insert is 3 900. The mass flow rate of the blowing air per unit area was varied within Q = 0−0.0488 кg/s/m2 . A consistent decrease in local skin friction, reaching up to 45−47 %, is observed to occur at the maximal blowing air mass flow rate studied.

Sign in / Sign up

Export Citation Format

Share Document