On Acoustic Signature of a Conceptual Airfoil Design with Leading-Edge Embedded Cross-Flow Fan

2019 ◽  
Author(s):  
Florent Colomb ◽  
Stanislav Karpuk ◽  
Marina Kazarina ◽  
Vladimir V. Golubev ◽  
Reda R. Mankbadi
Keyword(s):  
Cross Flow ◽  
Leading Edge ◽  
Acoustic Signature ◽  
Cross Flow Fan

Feasibility Study of a Multi-Purpose Aircraft Concept with a Leading-Edge Embedded Cross-Flow Fan

2020 ◽  
Vol 08 (01) ◽  
pp. 21-32
Author(s):  
Stanislav Karpuk ◽  
Snorri Gudmundsson ◽  
Vladimir Golubev
Keyword(s):  
Active Flow Control ◽  
Cross Flow ◽  
Leading Edge ◽  
Aircraft Design ◽  
General Aviation ◽  
Scaling Analysis ◽  
High Lift ◽  
Trade Study ◽  
Cross Flow Fan ◽  
The Impact

The research presented focuses on investigating the use of Cross-Flow Fan (CFF) as a high-lift device for a Short Take-off and Landing (STOL) aircraft. The wing-embedded fan performance analysis is mostly addressed from an aerodynamic perspective and focuses on using such Active Flow Control (AFC) technology in the conceptual aircraft design process. In particular, the design trade study of an aircraft featuring the fan as a high-lift device applied to a conceptual design of a medium-range multi-purpose aircraft is performed. A sensitivity analysis is employed to investigate the impact of the technology on the aircraft weight, aerodynamics, stability and control, and fight performance. The aircraft design modifications are introduced to maximize the aircraft mission performance given the fan specifications and constraints. Results indicate a reduction of the take-of field length by 18% with the payload penalty of 14%. The aircraft ferry range is also decreased by 7% compared to the baseline aircraft design. The scaling analysis of the aircraft concept is performed to determine the potential market for such technology. The results show that a light General Aviation (GA) airplane or a medium-large size Unmanned Aerial Vehicle (UAV) could benefit more from the wing-embedded CFF compared to more heavy airplanes.

Numerical Investigation of Passive Flow Control Using Wavy Blades in a Highly-Loaded Compressor Cascade

2018 ◽  
Author(s):  
Bo Wang ◽  
Yanhui Wu ◽  
Kai Liu
Keyword(s):  
Numerical Investigation ◽  
Flow Structure ◽  
Cross Flow ◽  
Leading Edge ◽  
Control Flow ◽  
Streamwise Vortices ◽  
Compressor Cascade ◽  
Control Effect ◽  
Suction Surface ◽  
Highly Loaded

Driven by the need to control flow separations in highly loaded compressors, a numerical investigation is carried out to study the control effect of wavy blades in a linear compressor cascade. Two types of wavy blades are studied with wavy blade-A having a sinusoidal leading edge, while wavy blade-B having pitchwise sinusoidal variation in the stacking line. The influence of wavy blades on the cascade performance is evaluated at incidences from −1° to +9°. For the wavy blade-A with suitable waviness parameters, the cascade diffusion capacity is enhanced accompanied by the loss reduction under high incidence conditions where 2D separation is the dominant flow structure on the suction surface of the unmodified blade. For well-designed wavy blade-B, the improvement of cascade performance is achieved under low incidence conditions where 3D corner separation is the dominant flow structure on the suction surface of the baseline blade. The influence of waviness parameters on the control effect is also discussed by comparing the performance of cascades with different wavy blade configurations. Detailed analysis of the predicted flow field shows that both the wavy blade-A and wavy blade-B have capacity to control flow separation in the cascade but their control mechanism are different. For wavy blade-A, the wavy leading edge results in the formation of counter-rotating streamwise vortices downstream of trough. These streamwise vortices can not only enhance momentum exchange between the outer flow and blade boundary layer, but also act as the suction surface fence to hamper the upwash of low momentum fluid driven by cross flow. For wavy blade-B, the wavy surface on the blade leads to a reduction of the cross flow upwash by influencing the spanwise distribution of the suction surface static pressure and guiding the upwash flow.

Effects of alternating elliptical chamber on jet impingement heat transfer in vane leading edge under different cross-flow conditions

2021 ◽  
pp. 1-17
Author(s):  
K. Xiao ◽  
J. He ◽  
Z. Feng
Keyword(s):  
Heat Transfer ◽  
Velocity Ratio ◽  
Cross Flow ◽  
Leading Edge ◽  
Longitudinal Vortices ◽  
Impingement Jet ◽  
Flow And Heat Transfer ◽  
Impingement Heat Transfer ◽  
Cross Flow Velocity ◽  
The Cross

ABSTRACT This paper proposes an alternating elliptical impingement chamber in the leading edge of a gas turbine to restrain the cross flow and enhance the heat transfer, and investigates the detailed flow and heat transfer characteristics. The chamber consists of straight sections and transition sections. Numerical simulations are performed by solving the three-dimensional (3D) steady Reynolds-Averaged Navier–Stokes (RANS) equations with the Shear Stress Transport (SST) k– $\omega$ turbulence model. The influences of alternating the cross section on the impingement flow and heat transfer of the chamber are studied by comparison with a smooth semi-elliptical impingement chamber at a cross-flow Velocity Ratio (VR) of 0.2 and Temperature Ratio (TR) of 1.00 in the primary study. Then, the effects of the cross-flow VR and TR are further investigated. The results reveal that, in the semi-elliptical impingement chamber, the impingement jet is deflected by the cross flow and the heat transfer performance is degraded. However, in the alternating elliptical chamber, the cross flow is transformed to a pair of longitudinal vortices, and the flow direction at the centre of the cross section is parallel to the impingement jet, thus improving the jet penetration ability and enhancing the impingement heat transfer. In addition, the heat transfer in the semi-elliptical chamber degrades rapidly away from the stagnation region, while the longitudinal vortices enhance the heat transfer further, making the heat transfer coefficient distribution more uniform. The Nusselt number decreases with increase of VR and TR for both the semi-elliptical chamber and the alternating elliptical chamber. The alternating elliptical chamber enhances the heat transfer and moves the stagnation point up for all VR and TR, and the heat transfer enhancement is more obvious at high cross-flow velocity ratio.

scholarly journals Attenuation of Cross-Flow Fan Noise Using Porous Stabilizers

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Huanxin Lai ◽  
Meng Wang ◽  
Chuye Yun ◽  
Jin Yao
Keyword(s):  
Cross Flow ◽  
Sound Radiation ◽  
Internal Flow ◽  
Considerable Effect ◽  
Front Wall ◽  
Performance Curve ◽  
Fan Noise ◽  
Aerodynamic Performances ◽  
The Cross ◽  
Cross Flow Fan

This paper presents a qualitative analysis of controlling the cross-flow fan noise by using porous stabilizers. The stabilizer was originally a folded plate. It is changed into a porous structure which has a plenum chamber and vent holes on the front wall. In order to investigate the influences of using the porous stabilizers, experiments are carried out to measure the cross-flow fan aerodynamic performances and sound radiation. Meanwhile, the internal flow field of the fan is numerically simulated. The results show that the porous stabilizers have not produced considerable effect on the cross-flow fan's performance curve, but the noise radiated from the fan is strongly affected. This indicates the feasibility of controlling the cross-flow fan noise by using the porous stabilizers with selected porosity.

Structure of a streamwise-oriented vortex incident upon a wing

2017 ◽  
Vol 816 ◽  
pp. 306-330 ◽  
Author(s):  
C. McKenna ◽  
M. Bross ◽  
D. Rockwell
Keyword(s):  
Root Mean Square ◽  
Cross Flow ◽  
Leading Edge ◽  
Streamwise Velocity ◽  
Mean Square ◽  
Swirl Ratio ◽  
Streamwise Vorticity ◽  
Image Velocimetry ◽  
Unsteady Loading ◽  
Drag Ratio

Impingement of a streamwise-oriented vortex upon a fin, tail, blade or wing represents a fundamental class of flow–structure interaction that extends across a range of applications. It can give rise to unsteady loading known as buffeting and to changes of the lift to drag ratio. These consequences are sensitive to parameters of the incident vortex as well as the location of vortex impingement on the downstream aerodynamic surface, generically designated as a wing. Particle image velocimetry is employed to determine patterns of velocity and vorticity on successive cross-flow planes along the vortex, which lead to volume representations and thereby characterization of the streamwise evolution of the vortex structure as it approaches the downstream wing. This evolution of the incident vortex is affected by the upstream influence of the downstream wing, and is highly dependent on the spanwise location of vortex impingement. Even at spanwise locations of impingement well outboard of the wing tip, a substantial influence on the structure of the incident vortex at locations significantly upstream of the leading edge of the wing was observed. For spanwise locations close to or intersecting the vortex core, the effects of upstream influence of the wing on the vortex are to: decrease the swirl ratio; increase the streamwise velocity deficit; decrease the streamwise vorticity; increase the azimuthal vorticity; increase the upwash; decrease the downwash; and increase the root-mean-square fluctuations of both streamwise velocity and vorticity. The interrelationship between these effects is addressed, including the rapid attenuation of axial vorticity in presence of an enhanced defect of axial velocity in the central region of the vortex. When the incident vortex is aligned with, or inboard of, the tip of the wing, the swirl ratio decreases to values associated with instability of the vortex, thereby giving rise to enhanced values of azimuthal vorticity relative to the streamwise (axial) vorticity, as well as relatively large root-mean-square values of streamwise velocity and vorticity.

scholarly journals Flow past a square-section cylinder with a wavy stagnation face

2001 ◽  
Vol 426 ◽  
pp. 263-295 ◽  
Author(s):  
RUPAD M. DAREKAR ◽  
SPENCER J. SHERWIN
Keyword(s):  
Reynolds Number ◽  
Cross Flow ◽  
Leading Edge ◽  
Reynolds Numbers ◽  
Physical Structure ◽  
Near Wake ◽  
Hairpin Vortices ◽  
Independent State ◽  
Flow Past ◽  
Edge Surface

Numerical investigations have been performed for the flow past square-section cylinders with a spanwise geometric deformation leading to a stagnation face with a sinusoidal waviness. The computations were performed using a spectral/hp element solver over a range of Reynolds numbers from 10 to 150.Starting from fully developed shedding past a straight cylinder at a Reynolds number of 100, a sufficiently high waviness is impulsively introduced resulting in the stabilization of the near wake to a time-independent state. It is shown that the spanwise waviness sets up a cross-flow within the growing boundary layer on the leading-edge surface thereby generating streamwise and vertical components of vorticity. These additional components of vorticity appear in regions close to the inflection points of the wavy stagnation face where the spanwise vorticity is weakened. This redistribution of vorticity leads to the breakdown of the unsteady and staggered Kármán vortex wake into a steady and symmetric near-wake structure. The steady nature of the near wake is associated with a reduction in total drag of about 16% at a Reynolds number of 100 compared with the straight, non-wavy cylinder.Further increases in the amplitude of the waviness lead to the emergence of hairpin vortices from the near-wake region. This wake topology has similarities to the wake of a sphere at low Reynolds numbers. The physical structure of the wake due to the variation of the amplitude of the waviness is identified with five distinct regimes. Furthermore, the introduction of a waviness at a wavelength close to the mode A wavelength and the primary wavelength of the straight square-section cylinder leads to the suppression of the Kármán street at a minimal waviness amplitude.

Sign in / Sign up

Export Citation Format

Share Document