Simulation of Parachute Inflation Dynamics Using an Eulerian Computational Framework for Fluid-Structure Interfaces Evolving in High-Speed Turbulent Flows

2018 ◽  
Author(s):  
Zhengyu Huang ◽  
Philip Avery ◽  
Charbel Farhat ◽  
Jason Rabinovitch ◽  
Armen Derkevorkian ◽  
...  
Keyword(s):  
Turbulent Flows ◽  
High Speed ◽  
Computational Framework ◽  
Inflation Dynamics ◽  
Fluid Structure ◽  
Parachute Inflation

scholarly journals Cross-Flow Tidal Turbines with Highly Flexible Blades—Experimental Flow Field Investigations at Strong Fluid–Structure Interactions

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 797
Author(s):  
Stefan Hoerner ◽  
Iring Kösters ◽  
Laure Vignal ◽  
Olivier Cleynen ◽  
Shokoofeh Abbaszadeh ◽  
...  
Keyword(s):  
Flow Field ◽  
High Speed ◽  
Cross Flow ◽  
Speed Ratio ◽  
Fluid Structure Interactions ◽  
Dimensional Parameter ◽  
Fluid Structure ◽  
Passive Flow Control ◽  
Tidal Turbines ◽  
Tidal Turbine

Oscillating hydrofoils were installed in a water tunnel as a surrogate model for a hydrokinetic cross-flow tidal turbine, enabling the study of the effect of flexible blades on the performance of those devices with high ecological potential. The study focuses on a single tip-speed ratio (equal to 2), the key non-dimensional parameter describing the operating point, and solidity (equal to 1.5), quantifying the robustness of the turbine shape. Both parameters are standard values for cross-flow tidal turbines. Those lead to highly dynamic characteristics in the flow field dominated by dynamic stall. The flow field is investigated at the blade level using high-speed particle image velocimetry measurements. Strong fluid–structure interactions lead to significant structural deformations and highly modified flow fields. The flexibility of the blades is shown to significantly reduce the duration of the periodic stall regime; this observation is achieved through systematic comparison of the flow field, with a quantitative evaluation of the degree of chaotic changes in the wake. In this manner, the study provides insights into the mechanisms of the passive flow control achieved through blade flexibility in cross-flow turbines.

Running safety evaluation of a 350 km/h high-speed freight train negotiating a curve based on the arbitrary Lagrangian-Eulerian method

2021 ◽  
pp. 095440972098628
Author(s):  
Gongxun Deng ◽  
Yong Peng ◽  
Chunguang Yan ◽  
Boge Wen
Keyword(s):  
High Speed ◽  
Safety Evaluation ◽  
Interaction Model ◽  
Arbitrary Lagrangian Eulerian ◽  
Railway Transportation ◽  
Freight Train ◽  
Fluid Structure ◽  
Running Safety ◽  
Study Results ◽  
Fill Level

To adapt to the rapid growth of the logistics market and further improve the competitiveness of railway transportation, the high-speed freight train with a design speed of 350 km/h is being developed in China. The safety of the train under great axle load of 17 t and dynamic load is unknown. This paper is aimed to study the running safety of the high-speed freight train coupled with various cargo loading conditions negotiating a sharp curve at high velocity. A numerical model integrated a fluid-structure coupled container model and the nonlinear high-speed freight train was set up by the software of LS-DYNA. The fluid-structure interaction model between the container and fluid cargo was established using the Arbitrary Lagrangian-Eulerian (ALE) method. Two influencing parameters, including the cargo state in the container and the fill level, were selected. The study results showed that the wheelset unloading ratio and overturning coefficient could be significantly affected by the liquid sloshing, while the influence of sloshing on the risk of derailment was slight. In general, increasing the cargo filling rate would contribute to vehicle operation safety. In conclusion, this study would provide theoretical help for the running safety of the newly designed high-speed freight train.

scholarly journals Optimal nonlinear eddy viscosity in Galerkin models of turbulent flows

2015 ◽  
Vol 766 ◽  
pp. 337-367 ◽  
Author(s):  
Bartosz Protas ◽  
Bernd R. Noack ◽  
Jan Östh
Keyword(s):  
Turbulent Flows ◽  
High Speed ◽  
Eddy Viscosity ◽  
Broad Class ◽  
Constitutive Relations ◽  
Body Height ◽  
Mixing Layer ◽  
The Body ◽  
Stream Velocity ◽  
Initial Vorticity

AbstractWe propose a variational approach to the identification of an optimal nonlinear eddy viscosity as a subscale turbulence representation for proper orthogonal decomposition (POD) models. The ansatz for the eddy viscosity is given in terms of an arbitrary function of the resolved fluctuation energy. This function is found as a minimizer of a cost functional measuring the difference between the target data coming from a resolved direct or large-eddy simulation of the flow and its reconstruction based on the POD model. The optimization is performed with a data-assimilation approach generalizing the 4D-VAR method. POD models with optimal eddy viscosities are presented for a 2D incompressible mixing layer at $\mathit{Re}=500$ (based on the initial vorticity thickness and the velocity of the high-speed stream) and a 3D Ahmed body wake at $\mathit{Re}=300\,000$ (based on the body height and the free-stream velocity). The variational optimization formulation elucidates a number of interesting physical insights concerning the eddy-viscosity ansatz used. The 20-dimensional model of the mixing-layer reveals a negative eddy-viscosity regime at low fluctuation levels which improves the transient times towards the attractor. The 100-dimensional wake model yields more accurate energy distributions as compared to the nonlinear modal eddy-viscosity benchmark proposed recently by Östh et al. (J. Fluid Mech., vol. 747, 2014, pp. 518–544). Our methodology can be applied to construct quite arbitrary closure relations and, more generally, constitutive relations optimizing statistical properties of a broad class of reduced-order models.

Thermo-Fluid-Dynamic Design of Reciprocating Compressor Cylinders by Fluid Structure Interaction (FSI)

2011 ◽  
Author(s):  
Riccardo Traversari ◽  
Alessandro Rossi ◽  
Marco Faretra
Keyword(s):  
High Speed ◽  
Fluid Dynamic ◽  
Fluid Structure Interaction ◽  
Classical Equation ◽  
Flow Coefficient ◽  
Reciprocating Compressor ◽  
Complex Situation ◽  
Fluid Structure ◽  
Associated Gas ◽  
Structure Interaction

Pressure losses at the cylinder valves of reciprocating compressors are generally calculated by the classical equation of the flow through an orifice, with flow coefficient determined in steady conditions. Rotational speed has increased in the last decade to reduce compressor physical dimensions, weight and cost. Cylinder valves and associated gas passages became then more and more critical, as they determine specific consumption and throughput. An advanced approach, based on the new Fluid Structure Interaction (FSI) software, which allows to deal simultaneously with thermodynamic, motion and deformation phenomena, was utilized to simulate the complex situation that occurs in a reciprocating compressor cylinder during the motion of the piston. In particular, the pressure loss through valves, ducts and manifolds was investigated. A 3D CFD Model, simulating a cylinder with suction and discharge valves, was developed and experimentally validated. The analysis was performed in transient and turbulent condition, with compressible fluid, utilizing a deformable mesh. The 3D domain simulating the compression chamber was considered variable with the law of motion of the piston and the valve rings mobile according to the fluid dynamic forces acting on them. This procedure is particularly useful for an accurate valve loss evaluation in case of high speed compressors and heavy gases. Also very high pressure cylinders, including LDPE applications, where the ducts are very small and MW close to the water one, can benefit from the new method.

A Fluid-Structure Coupled Computational Framework for Fluid-Induced Failure and Fracture

2015 ◽  
Author(s):  
Patrick D. Lea ◽  
Charbel Farhat ◽  
Kevin G. Wang
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Extended Finite Element Method ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Extended Finite Element ◽  
Computational Framework ◽  
Fluid Structure ◽  
Fracture Models

This work extends and generalizes a recently developed fluid-structure coupled computational framework to model and simulate fluid-induced failure and fracture. In particular, a novel surface representation approach is proposed to represent a fractured fluid-structure interface in the context of embedded boundary method. This approach is generic in the sense that it is applicable to many different computational fracture models and methods, including the element deletion (ED) technique and the extended finite element method (XFEM). Two three-dimensional model problems are presented to demonstrate the salient features of the computational framework, and to compare the performance of ED and XFEM in the context of fluid-induced failure and fracture.

Sign in / Sign up

Export Citation Format

Share Document