Optimization of the Lift and Drag Forces on Autorotors

2017 ◽  
Author(s):  
Sean Walters ◽  
Xinfeng Gao ◽  
Stephen Guzik
Keyword(s):  
Drag Forces ◽  
Lift And Drag

scholarly journals Preliminary Results on the Dynamics of a Pile-Moored Fish Cage with Elastic Net in Currents and Waves

2020 ◽  
Vol 9 (1) ◽  
pp. 14
Author(s):  
Gianluca Zitti ◽  
Nico Novelli ◽  
Maurizio Brocchini
Keyword(s):  
Numerical Model ◽  
Laboratory Experiments ◽  
Numerical Models ◽  
Offshore Structures ◽  
Fish Farm ◽  
Maximum Displacement ◽  
Drag Forces ◽  
Real Size ◽  
Lift And Drag ◽  
Mesh Grid

Over the last decades, the aquaculture sector increased significantly and constantly, moving fish-farm plants further from the coast, and exposing them to increasingly high forces due to currents and waves. The performances of cages in currents and waves have been widely studied in literature, by means of laboratory experiments and numerical models, but virtually all the research is focused on the global performances of the system, i.e., on the maximum displacement, the volume reduction or the mooring tension. In this work we propose a numerical model, derived from the net-truss model of Kristiansen and Faltinsen (2012), to study the dynamics of fish farm cages in current and waves. In this model the net is modeled with straight trusses connecting nodes, where the mass of the net is concentrated at the nodes. The deformation of the net is evaluated solving the equation of motion of the nodes, subjected to gravity, buoyancy, lift, and drag forces. With respect to the original model, the elasticity of the net is included. In this work the real size of the net is used for the computation mesh grid, this allowing the numerical model to reproduce the exact dynamics of the cage. The numerical model is used to simulate a cage with fixed rings, based on the concept of mooring the cage to the foundation of no longer functioning offshore structures. The deformations of the system subjected to currents and waves are studied.

Computational Aerodynamics of a Winston-Cup-Series Race Car

2002 ◽  
Author(s):  
Oktay Baysal ◽  
Terry L. Meek
Keyword(s):  
Present Model ◽  
Pressure Coefficient ◽  
The Body ◽  
Race Car ◽  
Drag Forces ◽  
Surface Pressure Distribution ◽  
Computational Aerodynamics ◽  
Baseline Case ◽  
Quantitative Results ◽  
Lift And Drag

Since the goal of racing is to win and since drag is a force that the vehicle must overcome, a thorough understanding of the drag generating airflow around and through a race car is greatly desired. The external airflow contributes to most of the drag that a car experiences and most of the downforce the vehicle produces. Therefore, an estimate of the vehicle’s performance may be evaluated using a computational fluid dynamics model. First, a computer model of the race car was created from the measurements of the car obtained by using a laser triangulation system. After a computer-aided drafting model of the actual car was developed, the model was simplified by removing the tires, roof strakes, and modification of the spoiler. A mesh refinement study was performed by exploring five cases with different mesh densities. By monitoring the convergence of the computed drag coefficient, the case with 2 million elements was selected as being the baseline case. Results included flow visualization of the pressure and velocity fields and the wake in the form of streamlines and vector plots. Quantitative results included lift and drag, and the body surface pressure distribution to determine the centerline pressure coefficient. When compared with the experimental results, the computed drag forces were comparable but expectedly lower than the experimental data mainly attributable to the differences between the present model and the actual car.

Vibration Excitation Forces in a Normal Triangular Tube Bundle Subjected to Two-Phase Cross Flow

2011 ◽  
Author(s):  
E. S. Perrot ◽  
N. W. Mureithi ◽  
M. J. Pettigrew ◽  
G. Ricciardi
Keyword(s):  
Tube Bundle ◽  
Cross Flow ◽  
Random Excitation ◽  
Two Phase ◽  
Constant Frequency ◽  
Fluid Forces ◽  
Drag Forces ◽  
Wide Range ◽  
Drag And Lift ◽  
Lift And Drag

This paper presents test results of vibration forces in a normal triangular tube bundle subjected to air-water cross-flow. The dynamic lift and drag forces were measured with strain gage instrumented cylinders. The array has a pitch-to-diameter ratio of 1.5, and the tube diameter is 38 mm. A wide range of void fraction and fluid velocities were tested. The experiments revealed significant forces in both the drag and lift directions. Constant frequency and quasi-periodic fluid forces were found in addition to random excitation. These forces were analyzed and characterized to understand their origins. The forces were found to be dependent on the position of the cylinder within the bundle. The results are compared with those obtained with flexible cylinders in the same tube bundle and to those for a rotated triangular tube bundle. These comparisons reveal the influence of quasi-periodic forces on tube motions.

scholarly journals Design of Fixed-Wing and Multi-Copter Hybrid Drone System for Human Body Temperature Measurement during COVID-19 Pandemic

2021 ◽  
Vol 20 ◽  
pp. 31-39
Author(s):  
Zayed Almheiri ◽  
Rawan Aleid ◽  
Sharul Sham Dol
Keyword(s):  
Body Temperature ◽  
Temperature Measurement ◽  
Human Body ◽  
Equivalent Strain ◽  
Simulation Software ◽  
Operational Conditions ◽  
Drag Forces ◽  
Human Body Temperature ◽  
Body Temperature Measurement ◽  
Lift And Drag

The purpose of this research is to conduct aerodynamics study and design a hybrid drone system of fixed-wing and multi-copter. The mission of this drone is to measure human body temperature during COVID19 pandemic. The specific aim of the drone is to fly and cover larger industrial areas roughly about 50 km2 with longer flying time than the conventional drone, of about 1.5 hours. The applications of the simulation software such as XFLR5 and ANSYS have a big impact in identifying areas that need to be improved for the drone system. XFLR5 software was used to compare the characteristics of different airfoils with highest lift over drag, L/D ratio. Based on the airfoil selection, it was found that NACA 4412 airfoil produces the highest L/D ratio. The detailed geometry of the drone system includes a fuselage length of 1.9 meters and wingspan of 2 meters. Moreover, 10 sheets of solar panels were placed along the wing for sustainable flight operation to cover wider areas of mission. The structural analysis was done on ANSYS to test the elastic stress, equivalent strain, deformation, factor of safety pressure as well as lift and drag forces under various operational conditions and payloads. The landing gear was analyzed for harsh landing. ANSYS Computational Fluid Dynamics (CFD) was utilized to study the aerodynamics of the drone at different parameters such as the velocities and angles of attack during the operation. This design ensures the stability of the drone during the temperature measurement phase. The best thermal-imaging camera for such purpose would be the Vue Pro R 336, 45° radiometric drone thermal camera with a resolution of 640 x 512 pixels. This camera has the advantage of a permanent continuous out focus that give the ability of taking measurements even if there was changing on the altitude or any kind of vibrations.

Influence of wing kinematics on aerodynamic performance in hovering insect flight

2007 ◽  
Vol 594 ◽  
pp. 341-368 ◽  
Author(s):  
FRANK M. BOS ◽  
D. LENTINK ◽  
B. W. VAN OUDHEUSDEN ◽  
H. BIJL
Keyword(s):  
Insect Flight ◽  
Fruit Fly ◽  
Aerodynamic Performance ◽  
Navier Stokes ◽  
Insect Wing ◽  
Wing Kinematics ◽  
Drag Forces ◽  
Kinematic Models ◽  
Characteristic Features ◽  
Lift And Drag

The influence of different wing kinematic models on the aerodynamic performance of a hovering insect is investigated by means of two-dimensional time-dependent Navier–Stokes simulations. For this, simplified models are compared with averaged representations of the hovering fruit fly wing kinematics. With increasing complexity, a harmonic model, a Robofly model and two more-realistic fruit fly models are considered, all dynamically scaled at Re = 110. To facilitate the comparison, the parameters of the models were selected such that their mean quasi-steady lift coefficients were matched. Details of the vortex dynamics, as well as the resulting lift and drag forces, were studied.The simulation results reveal that the fruit fly wing kinematics result in forces that differ significantly from those resulting from the simplified wing kinematic models. In addition, light is shed on the effect of different characteristic features of the insect wing motion. The angle of attack variation used by fruit flies increases aerodynamic performance, whereas the deviation is probably used for levelling the forces over the cycle.

On the reverse swing of a cricket ball—modelling and measurements

2001 ◽  
Vol 215 (1) ◽  
pp. 45-55 ◽  
Author(s):  
A T Sayers
Keyword(s):  
Boundary Layer ◽  
Flow Visualization ◽  
Reynolds Numbers ◽  
Flow Conditions ◽  
Drag Forces ◽  
Cricket Ball ◽  
Direct Measurements ◽  
Scale Ratio ◽  
Lift And Drag ◽  
At Will

The phenomenon of reverse swing of the ball in a game of cricket is achieved by very few bowlers, and then only by those who seem able to bowl at speeds in excess of 85 mile/h. It also seems that reverse swing cannot be achieved at will. Rather, it is obtained perhaps by accident as much as by design, its inception being as much of a surprise to the bowler as to the batsman. This would suggest that the flow conditions pertaining to reverse swing are extremely marginal at best. This paper investigates the flow conditions required for reverse swing to occur and presents data describing the lift and drag on the ball. While some direct measurements are made on a cricket ball for comparison purposes, the flow over the ball is modelled through a 2.7:1 scale ratio sphere. This permitted relatively large lift and drag forces to be measured. The results define the range of Reynolds numbers and seam angles over which reverse swing will occur, as well as the corresponding forces on the cricket ball. Flow visualization is used to indicate the state of the boundary layer.

Prediction of drag and lift forces of a high-speed vessel at full scale by CFD-based GEOSIM method

2022 ◽  
pp. 147509022110707
Author(s):  
Ugur Can ◽  
Sakir Bal
Keyword(s):  
High Speed ◽  
Full Scale ◽  
Navier Stokes ◽  
Drag Forces ◽  
Fluid Body ◽  
Unsteady Rans ◽  
Lift Forces ◽  
Drag And Lift ◽  
Lift And Drag ◽  
Model Family

In this study, it was aimed to obtain an accurate extrapolation method to compute lift and drag forces of high-speed vessels at full-scale by using CFD (Computational Fluid Dynamics) based GEOSIM (GEOmetrically SIMilar) method which is valid for both fully planing and semi-planing regimes. Athena R/V 5365 bare hull form with a skeg which is a semi-displacement type of high-speed vessel was selected with a model family for hydrodynamic analyses under captive and free to sinkage/trim conditions. Total drag and lift forces have been computed for a generated GEOSIM family of this form at three different model scales and full-scale for Fr = 0.8 by an unsteady RANS (Reynolds Averaged Navier–Stokes) solver. k–ε turbulence model was used to simulate the turbulent flow around the hulls, and both DFBI (Dynamic Fluid Body Interaction) and overset mesh technique were carried out to model the heave and pitch motions under free to sinkage/trim condition. The computational results of the model family were used to get “drag-lift ratio curve” for Athena hull at a fixed Fr number and so the corresponding results at full scale were predicted by extrapolating those of model scales in the form of a non-dimensional ratios of drag-lift forces. Then the extrapolated full-scale results calculated by modified GEOSIM method were compared with those of full-scale CFD and obtained by Froude extrapolation technique. The modified GEOSIM method has been found to be successful to compute the main forces (lift and drag) acting on high-speed vessels as a single coefficient at full scale. The method also works accurately both under fully and semi-planing conditions.

scholarly journals Stress and Shape Analysis of a Paraglider Wing

1965 ◽  
Vol 32 (4) ◽  
pp. 771-780 ◽  
Author(s):  
Robert W. Fralich
Keyword(s):  
Structural Analysis ◽  
Shape Analysis ◽  
Numerical Results ◽  
Internal Stresses ◽  
Flexible Wing ◽  
Aerodynamic Pressure ◽  
Drag Forces ◽  
Lift And Drag ◽  
Drag Ratio ◽  
Lift To Drag Ratio

A combined aerodynamic-structural analysis is made which is based on the assumption that the sail is flexible and has freedom to take the shape which the aerodynamic pressure and the internal stresses dictate. Numerical results were obtained for Newtonian impact aerodynamic theory and were compared with published results obtained for a rigid idealization of the paraglider wing. It was found that the assumed rigid idealization did not approximate the shape of a flexible wing well and led to significant errors in the lift and drag forces and the lift-to-drag ratio. The new calculations provide a basis for design of paragliders for hypersonic flight.

Lift And Drag Forces On A Submerged Circular Cylinder

1971 ◽  
Author(s):  
J.F. Beattie ◽  
L.P. Brown ◽  
B.F. Webb
Keyword(s):  
Circular Cylinder ◽  
Drag Forces ◽  
Lift And Drag

Effects of Dissolved Gas on Unsteady Cavitating Flow Around a Clark Y-11.7% Hydrofoil

2015 ◽  
Author(s):  
Haruki Daido ◽  
Satoshi Watanabe ◽  
Shin-ichi Tsuda
Keyword(s):  
High Speed ◽  
Cavitating Flow ◽  
Gas Content ◽  
Dissolved Gas ◽  
Drag Forces ◽  
Cavitation Behavior ◽  
Lift And Drag ◽  
Super Cavity ◽  
Unsteady Cavitating Flow ◽  
Low Do

In the present study, the effects of dissolved gas content on the unsteady cavitating flow around a Clark Y-11.7% hydrofoil are investigated in a cavitation tunnel. Lift and drag forces in various cavitating conditions are directly measured by strain gauges attached on the cantilever supporting the hydrofoil. In addition, the cavitating flow is filmed from the top and the side simultaneously using two high speed video cameras. The high (roughly 6–8ppm) and low (1–2ppm) DO conditions are examined to obtain the qualitative tendencies of the effects of dissolved gas on unsteady cavitation behavior and lift/drag characteristics. It is found that that the relationship between the cavitation behavior and the lift/drag fluctuations does not qualitatively differ in the two different DO conditions, while the amplitude is slightly larger in the low DO condition. At transitional cavity oscillation, in the both DO conditions, the lift/drag coefficients increase during the growth stage of sheet/bubble cavities on the hydrofoil and they decrease when the developed super-cavity disappears. Moreover, it seems that the amplitude of the lift/drag forces in the low DO condition is larger than in the high DO condition but the frequency of lift force fluctuation is not very different.

Sign in / Sign up

Export Citation Format

Share Document