Investigation into the sources of trailing edge noise using the Acoustic Perturbation Equations, LES, and RANS-based FRPM technique

2017 ◽  
Author(s):  
Stanislav Proskurov ◽  
Anton P. Markesteijn ◽  
Vasily Semiletov ◽  
Sergey A. Karabasov
Keyword(s):  
Trailing Edge ◽  
Trailing Edge Noise ◽  
Acoustic Perturbation ◽  
Perturbation Equations

Computation of trailing-edge noise due to turbulent flow over an airfoil

AIAA Journal ◽  
2002 ◽  
Vol 40 ◽  
pp. 2206-2216 ◽  
Author(s):  
A. Oberai ◽  
F. Roknaldin ◽  
T. J. R. Hughes
Keyword(s):  
Turbulent Flow ◽  
Trailing Edge ◽  
Trailing Edge Noise

Noise source location and scaling of subsonic upper-surface blowing

2020 ◽  
Vol 19 (3-5) ◽  
pp. 191-206
Author(s):  
Trae L Jennette ◽  
Krish K Ahuja
Keyword(s):  
Strouhal Number ◽  
Noise Source ◽  
Low Frequency ◽  
Directivity Pattern ◽  
Source Location ◽  
Dipole Source ◽  
Frequency Noise ◽  
Noise Sources ◽  
Trailing Edge ◽  
Trailing Edge Noise

This paper deals with the topic of upper surface blowing noise. Using a model-scale rectangular nozzle of an aspect ratio of 10 and a sharp trailing edge, detailed noise contours were acquired with and without a subsonic jet blowing over a flat surface to determine the noise source location as a function of frequency. Additionally, velocity scaling of the upper surface blowing noise was carried out. It was found that the upper surface blowing increases the noise significantly. This is a result of both the trailing edge noise and turbulence downstream of the trailing edge, referred to as wake noise in the paper. It was found that low-frequency noise with a peak Strouhal number of 0.02 originates from the trailing edge whereas the high-frequency noise with the peak in the vicinity of Strouhal number of 0.2 originates near the nozzle exit. Low frequency (low Strouhal number) follows a velocity scaling corresponding to a dipole source where as the high Strouhal numbers as quadrupole sources. The culmination of these two effects is a cardioid-shaped directivity pattern. On the shielded side, the most dominant noise sources were at the trailing edge and in the near wake. The trailing edge mounting geometry also created anomalous acoustic diffraction indicating that not only is the geometry of the edge itself important, but also all geometry near the trailing edge.

Streamwise fences for the reduction of trailing-edge noise in a NACA633018 airfoil

2022 ◽  
Author(s):  
Daniele Fiscaletti ◽  
Salil Luesutthiviboon ◽  
Francesco Avallone ◽  
Damiano Casalino
Keyword(s):  
Trailing Edge ◽  
Trailing Edge Noise
Sign in / Sign up

Export Citation Format

Share Document