scholarly journals Unsteady Fluid-Structure-Jet Interactions of Agile High-Speed Vehicles

2017 ◽  
Author(s):  
Ryan C. Kitson ◽  
Carlos E. Cesnik
Keyword(s):  
High Speed ◽  
Fluid Structure ◽  
Unsteady Fluid ◽  
Jet Interactions

scholarly journals Unsteady Fluid–Structure–Jet Interactions of Agile High-Speed Vehicles

2018 ◽  
Vol 55 (5) ◽  
pp. 1111-1124
Author(s):  
Ryan C. Kitson ◽  
Carlos E. S. Cesnik
Keyword(s):  
High Speed ◽  
Fluid Structure ◽  
Unsteady Fluid ◽  
Jet Interactions

scholarly journals Cross-Flow Tidal Turbines with Highly Flexible Blades—Experimental Flow Field Investigations at Strong Fluid–Structure Interactions

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 797
Author(s):  
Stefan Hoerner ◽  
Iring Kösters ◽  
Laure Vignal ◽  
Olivier Cleynen ◽  
Shokoofeh Abbaszadeh ◽  
...  
Keyword(s):  
Flow Field ◽  
High Speed ◽  
Cross Flow ◽  
Speed Ratio ◽  
Fluid Structure Interactions ◽  
Dimensional Parameter ◽  
Fluid Structure ◽  
Passive Flow Control ◽  
Tidal Turbines ◽  
Tidal Turbine

Oscillating hydrofoils were installed in a water tunnel as a surrogate model for a hydrokinetic cross-flow tidal turbine, enabling the study of the effect of flexible blades on the performance of those devices with high ecological potential. The study focuses on a single tip-speed ratio (equal to 2), the key non-dimensional parameter describing the operating point, and solidity (equal to 1.5), quantifying the robustness of the turbine shape. Both parameters are standard values for cross-flow tidal turbines. Those lead to highly dynamic characteristics in the flow field dominated by dynamic stall. The flow field is investigated at the blade level using high-speed particle image velocimetry measurements. Strong fluid–structure interactions lead to significant structural deformations and highly modified flow fields. The flexibility of the blades is shown to significantly reduce the duration of the periodic stall regime; this observation is achieved through systematic comparison of the flow field, with a quantitative evaluation of the degree of chaotic changes in the wake. In this manner, the study provides insights into the mechanisms of the passive flow control achieved through blade flexibility in cross-flow turbines.

Running safety evaluation of a 350 km/h high-speed freight train negotiating a curve based on the arbitrary Lagrangian-Eulerian method

2021 ◽  
pp. 095440972098628
Author(s):  
Gongxun Deng ◽  
Yong Peng ◽  
Chunguang Yan ◽  
Boge Wen
Keyword(s):  
High Speed ◽  
Safety Evaluation ◽  
Interaction Model ◽  
Arbitrary Lagrangian Eulerian ◽  
Railway Transportation ◽  
Freight Train ◽  
Fluid Structure ◽  
Running Safety ◽  
Study Results ◽  
Fill Level

To adapt to the rapid growth of the logistics market and further improve the competitiveness of railway transportation, the high-speed freight train with a design speed of 350 km/h is being developed in China. The safety of the train under great axle load of 17 t and dynamic load is unknown. This paper is aimed to study the running safety of the high-speed freight train coupled with various cargo loading conditions negotiating a sharp curve at high velocity. A numerical model integrated a fluid-structure coupled container model and the nonlinear high-speed freight train was set up by the software of LS-DYNA. The fluid-structure interaction model between the container and fluid cargo was established using the Arbitrary Lagrangian-Eulerian (ALE) method. Two influencing parameters, including the cargo state in the container and the fill level, were selected. The study results showed that the wheelset unloading ratio and overturning coefficient could be significantly affected by the liquid sloshing, while the influence of sloshing on the risk of derailment was slight. In general, increasing the cargo filling rate would contribute to vehicle operation safety. In conclusion, this study would provide theoretical help for the running safety of the newly designed high-speed freight train.

Simulation of high speed jet interactions in complex aeroacoustic environments

2001 ◽  
Author(s):  
S. Dash ◽  
E. Perrell ◽  
S. Arunajatesan ◽  
C. Kannepalli ◽  
P. Cavallo ◽  
...  
Keyword(s):  
High Speed ◽  
Jet Interactions

Thermo-Fluid-Dynamic Design of Reciprocating Compressor Cylinders by Fluid Structure Interaction (FSI)

2011 ◽  
Author(s):  
Riccardo Traversari ◽  
Alessandro Rossi ◽  
Marco Faretra
Keyword(s):  
High Speed ◽  
Fluid Dynamic ◽  
Fluid Structure Interaction ◽  
Classical Equation ◽  
Flow Coefficient ◽  
Reciprocating Compressor ◽  
Complex Situation ◽  
Fluid Structure ◽  
Associated Gas ◽  
Structure Interaction

Pressure losses at the cylinder valves of reciprocating compressors are generally calculated by the classical equation of the flow through an orifice, with flow coefficient determined in steady conditions. Rotational speed has increased in the last decade to reduce compressor physical dimensions, weight and cost. Cylinder valves and associated gas passages became then more and more critical, as they determine specific consumption and throughput. An advanced approach, based on the new Fluid Structure Interaction (FSI) software, which allows to deal simultaneously with thermodynamic, motion and deformation phenomena, was utilized to simulate the complex situation that occurs in a reciprocating compressor cylinder during the motion of the piston. In particular, the pressure loss through valves, ducts and manifolds was investigated. A 3D CFD Model, simulating a cylinder with suction and discharge valves, was developed and experimentally validated. The analysis was performed in transient and turbulent condition, with compressible fluid, utilizing a deformable mesh. The 3D domain simulating the compression chamber was considered variable with the law of motion of the piston and the valve rings mobile according to the fluid dynamic forces acting on them. This procedure is particularly useful for an accurate valve loss evaluation in case of high speed compressors and heavy gases. Also very high pressure cylinders, including LDPE applications, where the ducts are very small and MW close to the water one, can benefit from the new method.

scholarly journals High-Speed X-ray Stereo Digital Image Correlation for Fluid-Structure Interactions in a Shock Tube

2020 ◽  
Author(s):  
Jeremy James ◽  
Elizabeth M. Jones ◽  
Enrico C. Quintana ◽  
Kyle P. Lynch ◽  
Benjamin R. Halls ◽  
...  
Keyword(s):  
Digital Image Correlation ◽  
Shock Tube ◽  
Digital Image ◽  
High Speed ◽  
Image Correlation ◽  
Fluid Structure Interactions ◽  
Fluid Structure ◽  
X Ray ◽  
Stereo Digital Image Correlation
Sign in / Sign up

Export Citation Format

Share Document