Experimental Study on the Detailed Structure of Separation Bubble in Flow Control with DBD Plasma Actuator

2017 ◽  
Author(s):  
Yuma Miyakawa ◽  
Satoshi Sekimoto ◽  
Makoto Sato ◽  
Taku Nonomura ◽  
Akira Oyama ◽  
...  
Keyword(s):  
Experimental Study ◽  
Flow Control ◽  
Separation Bubble ◽  
Plasma Actuator ◽  
Detailed Structure ◽  
Dbd Plasma

scholarly journals Coherent structures induced by dielectric barrier discharge plasma actuator

2017 ◽  
Vol 31 (32) ◽  
pp. 1850038 ◽  
Author(s):  
Xin Zhang ◽  
Huaxing Li ◽  
Kwing So Choi ◽  
Longfei Song
Keyword(s):  
Flow Control ◽  
Dielectric Barrier Discharge ◽  
Coherent Structures ◽  
High Speed ◽  
Barrier Discharge ◽  
Plasma Actuator ◽  
Dbd Plasma ◽  
Peak Voltage ◽  
Dielectric Barrier ◽  
Piv Measurement

The structures of a flow field induced by a plasma actuator were investigated experimentally in quiescent air using high-speed Particle Image Velocimetry (PIV) technology. The motivation behind was to figure out the flow control mechanism of the plasma technique. A symmetrical Dielectric Barrier Discharge (DBD) plasma actuator was mounted on the suction side of the SC (2)-0714 supercritical airfoil. The results demonstrated that the plasma jet had some coherent structures in the separated shear layer and these structures were linked to a dominant frequency of [Formula: see text] = 39 Hz when the peak-to-peak voltage of plasma actuator was 9.8 kV. The high speed PIV measurement of the induced airflow suggested that the plasma actuator could excite the flow instabilities which lead to production of the roll-up vortex. Analysis of transient results indicated that the roll-up vortices had the process of formation, movement, merging and breakdown. This could promote the entrainment effect of plasma actuator between the outside airflow and boundary layer flow, which is very important for flow control applications.

scholarly journals Experimental Study on Anti-Icing Performance of NS-DBD Plasma Actuator

2018 ◽  
Vol 8 (10) ◽  
pp. 1889 ◽  
Author(s):  
Jie Chen ◽  
Hua Liang ◽  
Yun Wu ◽  
Biao Wei ◽  
Guangyin Zhao ◽  
...  
Keyword(s):  
Experimental Study ◽  
Heat Dissipation ◽  
Ccd Camera ◽  
Liquid Water Content ◽  
Pulse Frequency ◽  
Plasma Actuator ◽  
Voltage Amplitude ◽  
Dbd Plasma ◽  
Naca0012 Airfoil ◽  
Actuation Signal

An experimental study was conducted to evaluate the anti-icing performance of NS-DBD plasma actuator under the conditions of airflow speed U = 65 m/s, ambient temperature T = −10 °C, liquid water content LWC = 0.5 g/m3, mean-volume diameter MVD = 25 μm, mainly to clarify the effect of pulse frequency and voltage amplitude of actuation on anti-icing performance. A NACA0012 airfoil model with a chord length of c = 280 mm was used in the tests. The NS-DBD plasma actuator was mounted at the front part of the airfoil. A FLIR infrared (IR) imager and CCD camera were used to record the anti-icing process of the NS-DBD plasma actuator. Two typical discharge conditions were selected for the anti-icing experiments. The first was HV-LF discharge, corresponding to discharge under higher voltage amplitude with lower pulse frequency; the second was LV-HF discharge, corresponding to discharge under lower voltage amplitude with higher pulse frequency. Results reveal that NS-DBD is a very promising method for anti-icing. With the same power consumption, the LV-HF discharge shows a better anti-icing performance compared to HV-LF discharge under the same icing conditions. In view of pulse duration and duty circle, combined with heat dissipation, it is suggested that there is a threshold frequency, corresponding to the voltage amplitude of electric actuation signal and the incoming flow condition, to achieve effective anti-icing performance.

S0504-4-1 An Experimental Study on Acceleration Mechanism of Jet by DBD Plasma Actuator

2009 ◽  
Vol 2009.2 (0) ◽  
pp. 201-202
Author(s):  
Takehiko Segawa ◽  
Hiro Yoshida ◽  
Shinya Takekawa ◽  
Kwing-So Choi
Keyword(s):  
Experimental Study ◽  
Plasma Actuator ◽  
Dbd Plasma ◽  
Acceleration Mechanism

Flow Control on a Transport Truck Side Mirror Using Plasma Actuators

2015 ◽  
Vol 137 (11) ◽  
Author(s):  
Theodoros Michelis ◽  
Marios Kotsonis
Keyword(s):  
Flow Control ◽  
Guide Vane ◽  
Leading Edge ◽  
Plasma Actuator ◽  
Plasma Actuators ◽  
Dbd Plasma ◽  
Reference Case ◽  
Image Velocimetry ◽  
Wind Tunnel Study ◽  
Edge Separation

A wind tunnel study is conducted toward hybrid flow control of a full scale transport truck side mirror at ReD=3.2×105. A slim guide vane is employed for redirecting high-momentum flow toward the mirror wake region. Leading edge separation from the guide vane is reduced or eliminated by means of an alternating current -dielectric barrier discharge (AC-DBD) plasma actuator. Particle image velocimetry (PIV) measurements are performed at a range of velocities from 15 to 25 m/s and from windward to leeward angles from -5deg to 5deg. Time-averaged velocity fields are obtained at the center of the mirror for three scenarios: (a) reference case lacking any control elements, (b) guide vane only, and (c) combination of the guide vane and the AC-DBD plasma actuator. The comparison of cases demonstrates that at 25 m/s windward conditions (-5deg) the guide vane is capable of recovering 17% momentum with respect to the reference case. No significant change is observed by activating the AC-DBD plasma actuator. In contrast, at leeward conditions (5deg), the guide vane results in a −20% momentum loss that is rectified to a 6% recovery with actuation. The above implies that for a truck with two mirrors, 23% of momentum may be recovered.

Sign in / Sign up

Export Citation Format

Share Document