An Inadequacy Formulation for an Uncertain Flamelet Model

2017 ◽  
Author(s):  
David Sondak ◽  
Todd Oliver ◽  
Chris Simmons ◽  
Robert Moser
Keyword(s):  
Flamelet Model

Finite Element Volume Analysis of Propane Preheated Air Flame Passing Through a Minichannel

2014 ◽  
Author(s):  
Masoud Darbandi ◽  
Majid Ghafourizadeh ◽  
Gerry E. Schneider
Keyword(s):  
Finite Element ◽  
Radiation Effects ◽  
Mixture Fraction ◽  
Flame Structure ◽  
Current Method ◽  
Reacting Flow ◽  
Wall Functions ◽  
Flamelet Model ◽  
Combustion Modeling ◽  
Detailed Kinetics

A hybrid finite-element-volume FEV method is extended to simulate turbulent non-premixed propane air preheated flame in a minichannel. We use a detailed kinetics scheme, i.e. GRI mechanism 3.0, and the flamelet model to perform the combustion modeling. The turbulence-chemistry interaction is taken into account in this flamelet modeling using presumed shape probability density functions PDFs. Considering an upwind-biased physics for the current reacting flow, we implement the physical influence upwinding scheme PIS to estimate the cell-face mixture fraction variance in this study. To close the turbulence closure, we employ the two-equation standard κ-ε turbulence model incorporated with suitable wall functions. Supposing an optically thin limit, it needs to take into account radiation effects of the most important radiating species in the current modeling. Despite facing with so many flame instabilities in such small size configuration, the current method performs suitably with proper convergence, and the encountered instabilities are damped out automatically. Comparing with the experimental measurements, the current extended method accurately predicts the flame structure in the minichannel configuration.

Large-Eddy Simulation of Combustion Oscillation in Premixed Combustor

1999 ◽  
Author(s):  
Tomoya Murota ◽  
Masaya Ohtsuka
Keyword(s):  
Large Eddy Simulation ◽  
Present Method ◽  
Premixed Combustion ◽  
Compressible Turbulence ◽  
Flamelet Model ◽  
Turbulent Premixed Flame ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Combustion Oscillation ◽  
Combustion Flow

To analyze combustion oscillation in the premixed combustor, a large-eddy simulation program for premixed combustion flow was developed. The subgrid scale (SGS) model of eddy viscosity type for compressible turbulence (Speziale et al., 1988) was adopted to treat the SGS fluxes. The fractal flamelet model, which utilizes the fractal properties of the turbulent premixed flame to obtain the reaction rate, was developed. Premixed combustion without oscillation was analyzed to verify the present method. The computational results showed good accordance with experimental data (Rydén et al., 1993). The combustion oscillation of an “established buzz” type in the premixed combustor (Langhorne, 1988) was also analyzed. The present method succeeded in capturing the oscillation accurately. The detailed mechanism was investigated. The appearance of the non-heat release region, which is generated because the supply of the unburnt gas into the combustion zone stagnates, and its disappearance play an important role.

scholarly journals Modeling of Spray Combustion with a Steady Laminar Flamelet Model in an Aeroengine Combustion Chamber Based on OpenFOAM

2018 ◽  
Vol 2018 ◽  
pp. 1-13
Author(s):  
Yinli Xiao ◽  
Zupeng Wang ◽  
Zhengxin Lai ◽  
Wenyan Song
Keyword(s):  
Combustion Chamber ◽  
High Performance ◽  
Numerical Models ◽  
Spray Combustion ◽  
Combustion Chambers ◽  
Flamelet Model ◽  
Steady Laminar ◽  
Good Agreement ◽  
Laminar Flamelet ◽  
Laminar Flamelet Model

The development of high-performance aeroengine combustion chambers strongly depends on the accuracy and reliability of efficient numerical models. In the present work, a reacting solver with a steady laminar flamelet model and spray model has been developed in OpenFOAM and the solver details are presented. The solver is firstly validated by Sandia/ETH-Zurich flames. Furthermore, it is used to simulate nonpremixed kerosene/air spray combustion in an aeroengine combustion chamber with the RANS method. A comparison with available experimental data shows good agreement and validates the capability of the new developed solver in OpenFOAM.

A test of a flamelet model for turbulent nonpremixed combustion☆

1994 ◽  
Vol 96 (1-2) ◽  
pp. 104-120 ◽  
Author(s):  
Y BURIKO ◽  
V KUZNETSOV ◽  
D VOLKOV ◽  
S ZAITSEV ◽  
A URYVSKY
Keyword(s):  
Flamelet Model ◽  
Nonpremixed Combustion ◽  
Turbulent Nonpremixed

Comparisons of Diesel PCCI Combustion Simulations Using a Representative Interactive Flamelet Model and Direct Integration of CFD With Detailed Chemistry

2006 ◽  
Vol 129 (1) ◽  
pp. 252-260 ◽  
Author(s):  
Song-Charng Kong ◽  
Hoojoong Kim ◽  
Rolf D. Reitz ◽  
Yongmo Kim
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Direct Integration ◽  
Computational Cell ◽  
Flamelet Model ◽  
Detailed Chemistry ◽  
Engine Simulation ◽  
Integration Approach ◽  
Simulation Results ◽  
Release Data

Diesel engine simulation results using two different combustion models are presented in this study, namely the representative interactive flamelet (RIF) model and the direct integration of computational fluid dynamics and CHEMKIN. Both models have been implemented into an improved version of the KIVA code. The KIVA/RIF model uses a single flamelet approach and also considers the effects of vaporization on turbulence-chemistry interactions. The KIVA/CHEMKIN model uses a direct integration approach that solves for the chemical reactions in each computational cell. The above two models are applied to simulate combustion and emissions in diesel engines with comparable results. Detailed comparisons of predicted heat release data and in-cylinder flows also indicate that both models predict very similar combustion characteristics. This is likely due to the fact that after ignition, combustion rates are mixing controlled rather than chemistry controlled under the diesel conditions studied.

scholarly journals Existence of solutions for the Eulerian flamelet model equations

2013 ◽  
Vol 57 (9-10) ◽  
pp. 2196-2206
Author(s):  
Greice S. Lorenzzetti ◽  
Álvaro L. de Bortoli ◽  
Lígia D.F. Marczak
Keyword(s):  
Existence Of Solutions ◽  
Flamelet Model ◽  
Model Equations

scholarly journals Improvement of CFD models of tunnel fire development based on experimental data

2017 ◽  
Vol 21 (suppl. 3) ◽  
pp. 705-716 ◽  
Author(s):  
Barbara Vidakovic ◽  
Milos Banjac
Keyword(s):  
Experimental Data ◽  
Combustion Process ◽  
Burning Surface ◽  
Physical Structure ◽  
Cfd Model ◽  
Change Rate ◽  
Flamelet Model ◽  
Tunnel Fire ◽  
Cfd Models ◽  
Combustion Processes

This paper, dealing with the problems of mathematical description of the tunnel fire development process with the use of experimental data, outlines the procedure of correction of the existing and obtaining of an improved CFD model package. The improved CFD model was developed on the basis of detailed analysis and comparison of experimental and numerical results, through consideration of the physical structure of all processes affecting combustion. During the analysis it was noticed that the existing CFD model in the part covering combustion based on the so-called steady laminar flamelet model, treats the combustion process almost as a direct correlation between the processes of mixing gasses and heat release rate. This potential deficiency has been overcome by correction of the model in the section defining boundary condition for the burning surface and by establishing a direct correlation between the measured value of the fuel mass change rate and the amount of heat released from burning surface. In this way a modification of complex stoichiometric combustion processes was avoided, while providing the model that better describes and predicts the course of events in this type of complex, anisotropic and turbulent flow of gases in the tunnel.

Applying the Representative Interactive Flamelet Model to Evaluate the Potential Effect of Wall Heat Transfer on Soot Emissions in a Small-Bore Direct-Injection Diesel Engine

2002 ◽  
Vol 124 (4) ◽  
pp. 1042-1052 ◽  
Author(s):  
C. Hergart ◽  
N. Peters
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Direct Injection ◽  
Particle Growth ◽  
Potential Effect ◽  
Two Phase ◽  
Flamelet Model ◽  
Detailed Chemistry ◽  
Direct Injection Diesel Engine ◽  
Soot Emissions

Capturing the physics related to the processes occurring in the two-phase flow of a direct-injection diesel engine requires a highly sophisticated modeling approach. The representative interactive flamelet (RIF) model has gained widespread attention owing to its ability of correctly describing ignition, combustion, and pollutant formation phenomena. This is achieved by incorporating very detailed chemistry for the gas phase as well as for the soot particle growth and oxidation, without imposing any significant computational penalty. This study addresses the part load soot underprediction of the model, which has been observed in previous investigations. By assigning flamelets, which are exposed to the walls of the combustion chamber, with heat losses calculated in a computational fluid dynamics (CFD) code, predictions of the soot emissions in a small-bore direct-injection diesel engine are substationally improved. It is concluded that the experimentally observed emissions of soot may have their origin in flame quenching at the relatively cold combustion chamber walls.

Sign in / Sign up

Export Citation Format

Share Document