ACCESS (ArtifiCial gravity CEntrifuge Space Station)

2016 ◽  
Author(s):  
Akshata Krishnamurthy ◽  
Samuel Wald ◽  
Roedolph Opperman ◽  
Anthony Broll ◽  
Charlotte Lowey ◽  
...  
Author(s):  
Koichi Ohtomi ◽  
Fumio Otsuki ◽  
Hirohiko Uematsu ◽  
Yasuhiro Nakamura ◽  
Yuichi Chida ◽  
...  

Abstract The Centrifuge Rotor (CR) is an artificial gravity generator, which is aiming at launch in 2006 as a portion of the life science experimental facility of the International Space Station (ISS). The CR rotates habitats located radially around the axis and generates centrifugal force, imposing artificial gravity of arbitrary magnitude up to 22.0 m/s2 (about 2.2 g) on the specimens housed in the habitats. The imbalance is caused by the asymmetry of two habitats opposite each other, which brings about change in the mass of the habitats as well as the quasi-static change of the CG of plants and fluids and the dynamic rodent motions in the habitats. The active mass Auto-Balancing System (ABS) is provided for automatic canceling of the above-mentioned imbalance of the rotor. This paper presents the concept and the test results of the ABS.


1984 ◽  
Author(s):  
Thora W. Halstead ◽  
Allan H. Brown ◽  
Charles A. Fuller ◽  
Jiro Oyama

2021 ◽  
Author(s):  
Shingo Ozaki ◽  
Genya Ishigami ◽  
Masatsugu Otsuki ◽  
Hirdy Miyamoto ◽  
Koji Wada ◽  
...  

Abstract Studying the gravity-dependent characteristics of regolith, fine-grained granular media covering extra-terrestrial bodies is essential for the reliable design and analysis of landers and rovers for space exploration. We performed a granular flow experiment under stable artificial gravity conditions generated by a centrifuge on the International Space Station. We also performed a discrete element simulation of the granular flow in both artificial and natural gravity environments. The simulation results verified that the granular flows in artificial and natural gravity are consistent. Further, regression analysis of the granular flow results revealed that the mass flow rate quantitatively follows a well-known physics-based law with some deviations under low-gravity conditions, implying that the bulk density of the granular media decreases with gravity. This insight also indicates that the bulk density considered in simulation studies of space probes under low-gravity conditions needs to be tuned for their reliable design and analysis.


2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Shreyash A. Sakhare ◽  
Sourabh M. Pendkar ◽  
Nand Jee Kanu ◽  
Eva Gupta ◽  
Umesh Kumar Vates ◽  
...  

Abstract The present research investigates the design of compact and lightweight waste collection system (WCS) for interplanetary missions such as Mars, and the Moon as well as the space with the required features of NASA’s lunar loo challenge (released date: 25th June, 2020). Existing space toilets’ WCS store waste in small plastic bags and these bags are thrown in the space which increases the space junk. If these WCS are used on planets, they could pollute the planets. The newly designed—unisex and self-sustainable space toilet meets its objective of intimacy and warmth for the astronauts as it is equipped with all essential features such as (a) the basin for vomit collection, (b) the rotating waste storage based on the mechanism of artificial gravity, and (c) the noiseless bellow pump for air flow flushing system (AFFS). The WCS is designed for the storage of urine, faeces, vomit, diarrhoea, and menses. In the first half of the research article, the focus is kept on improving self-sustainability of the present WCS. In the second half of the present investigation analyses are done for multiphase flows of the CFD analysis in ANSYS fluent to simulate the flow of air through the nozzle provided with (a) the seat, (b) the urine funnel, and (c) the basin for air flow flushing system (AFFS). The design of the present self-sustainable space toilet proposed herewith is justified suitable for different gravitational conditions such as (a) Mars (3.721 m/s2), (b) the Moon (1.62 m/s2), and (c) the zero—or microgravity i.e., the space gravity. The proposed solar-operated WCS could be integrated to function with (a) water recovery and management (WRM) system, (b) the inbuilt composting unit, and (c) the bioregenerative life support system (BLSS). Furthermore, the assessment of the required electrical energy derived from the solar energy (harnessed using efficient solar photovoltaic (PV) modules) is conceptualized for the effective functioning of the present self-sustainable WCS. Article highlights The present investigation explores into the design of lightweight and compact WCS for interplanetary missions such as Mars and the Moon, as well as space missions with the functionality listed by NASA's lunar toilet competition (released date: 25th June, 2020). The actual space toilets, which are used on the International Space Station (ISS), are not designed to withstand varying gravity circumstances. The new advanced—unisex and self-sustaining space toilet achieves its goal of intimacy and warmth for astronauts by including all necessary features such as (a) a vomit collection basin, (b) rotating waste storage based on artificial gravity mechanism, and (c) a noiseless bellow pump for air flow flushing system (AFFS).


Author(s):  
H. Rudy Ramsey

Rotation of a spacecraft to induce artificial gravity will result in a number of unusual mechanical and perceptual phenomena. The nature of the unusual forces observed in artificial gravity is such that their effects are mediated by the position, orientation, and direction of motion of the astronaut. Thus, under artificial gravity, crew station design may have a significant impact on the performance of a space station crew. The effects on performance of the unusual forces resulting from artificial gravity are discussed. General guidelines are presented to aid the designer in floor layout and in the design and orientation of crew stations and translation aids. Some possible mission constraints resulting from incomplete or radius-specific adaptation are discussed.


Author(s):  
Longxiang Su ◽  
Yinghua Guo ◽  
Yajuan Wang ◽  
Delong Wang ◽  
Changting Liu

AbstractTo explore the effectiveness of microgravity simulated by head-down bed rest (HDBR) and artificial gravity (AG) with exercise on lung function. Twenty-four volunteers were randomly divided into control and exercise countermeasure (CM) groups for 96 h of 6° HDBR. Comparisons of pulse rate, pulse oxygen saturation (SpO2) and lung function were made between these two groups at 0, 24, 48, 72, 96 h. Compared with the sitting position, inspiratory capacity and respiratory reserve volume were significantly higher than before HDBR (0° position) (P< 0.05). Vital capacity, expiratory reserve volume, forced vital capacity, forced expiratory volume in 1 s, forced inspiratory vital capacity, forced inspiratory volume in 1 s, forced expiratory flow at 25, 50 and 75%, maximal mid-expiratory flow and peak expiratory flow were all significantly lower than those before HDBR (P< 0.05). Neither control nor CM groups showed significant differences in the pulse rate, SpO2, pulmonary volume and pulmonary ventilation function over the HDBR observation time. Postural changes can lead to variation in lung volume and ventilation function, but a HDBR model induced no changes in pulmonary function and therefore should not be used to study AG CMs.


1999 ◽  
Author(s):  
H. Charles Dischinger ◽  
Neal C. Tilghman ◽  
Matthew Hammons ◽  
Joseph P. Hale
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document