Effective Angle of Attack Control of a Flat Plate Flapping-Foil Turbine

2014 ◽  
Author(s):  
Chigozie Usoh ◽  
John Young ◽  
Joseph Lai ◽  
Muhammad Ashraf
Keyword(s):  
Flat Plate ◽  
Angle Of Attack ◽  
Flapping Foil ◽  
Effective Angle

scholarly journals Comparative investigations in the effect of angle of attack profile on hydrodynamic performance of bio-inspired foil, (corrected)

2013 ◽  
Vol 10 (2) ◽  
pp. 99-108 ◽  
Author(s):  
J. A. Esfahani ◽  
E. Barati ◽  
Hamid Reza Karbasian
Keyword(s):  
Angle Of Attack ◽  
Underwater Vehicles ◽  
Hydrodynamic Performance ◽  
Profile Function ◽  
Flapping Foil ◽  
Propulsive Performance ◽  
Wide Range ◽  
Effective Angle ◽  
Thrust Production ◽  
Optimum Profile

In flapping underwater vehicles the propulsive performance of harmonically sinusoidal heaving and pitching foil will be degraded by some awkward changes in effective angle of attack profile, as the Strouhal number increases. This paper surveys different angle of attack profiles (Sinusoidal, Square, Sawtooth and Cosine) and considers their thrust production ability. In the wide range of Strouhal numbers, thrust production of Square profile is considerable but it has a discontinuity in heave velocity profile, in which an infinite acceleration exists. This problem poses a significant defect in control of flapping foil. A novel profile function is proposed to omit sharp changes in heave velocity and acceleration. Furthermore, an optimum profile is found for different Strouhal numbers with respect to Square angle of attack profile.DOI: http://dx.doi.org/10.3329/jname.v10i2.14229

Rarefied gas flow past a flat plate at zero angle of attack

2020 ◽  
Vol 32 (8) ◽  
pp. 087108
Author(s):  
A. A. Abramov ◽  
A. V. Butkovskii ◽  
O. G. Buzykin
Keyword(s):  
Flat Plate ◽  
Gas Flow ◽  
Rarefied Gas ◽  
Angle Of Attack ◽  
Rarefied Gas Flow ◽  
Flow Past

Modification of effective angle of attack on hydrofoil power extraction

2021 ◽  
Vol 240 ◽  
pp. 109919
Author(s):  
Guanghua He ◽  
Weijie Mo ◽  
Yun Gao ◽  
Zhigang Zhang ◽  
Jiadong Wang ◽  
...  
Keyword(s):  
Angle Of Attack ◽  
Power Extraction ◽  
Effective Angle

Optimal Position of Rectangular Vortex Generator for Heat Transfer Enhancement in a Flat-Plate Channel

2017 ◽  
Author(s):  
Tariq Amin Khan ◽  
Wei Li ◽  
Zhengjiang Zhang ◽  
Jincai Du ◽  
Sadiq Amin Khan ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Numerical Simulations ◽  
Flat Plate ◽  
Heat Transfer Enhancement ◽  
Angle Of Attack ◽  
Vortex Generator ◽  
Transfer Enhancement ◽  
Optimal Position ◽  
Plate Channel

Heat transfer is a naturally occurring phenomenon which can be greatly enhanced by introducing longitudinal vortex generators (VGs). As the longitudinal vortices can potentially enhance heat transfer with small pressure loss penalty, VGs are widely used to enhance the heat transfer of flat-plate type heat exchangers. However, there are few researches which deal with its thermal optimization. Three dimensional numerical simulations are performed to study the effect of angle of attack and attach angle (angle between VG and wall) of vortex generator on the fluid flow and heat transfer characteristics of a flat-plate channel. The flow is assumed as steady state, incompressible and laminar within the range of studied Reynolds numbers (Re = 380, 760, 1140). In the present work, the average and local Nusselt number and pressure drop are investigated for Rectangular vortex generator (RVG) with varying angle of attack and attach angle. The numerical results indicate that the heat transfer and pressure drop increases with increasing the angle of attack to a certain range and then decreases with increasing angle of attack. Moreover, the attach angle also plays an importance role; a 90° attach angle is not necessary for enhancing the heat transfer. Usually, heat transfer enhancement is achieved at the expense of pressure drop penalty. To find the optimal position of vortex generator to obtain maximum heat transfer and minimum pressure drop, the data obtained from numerical simulations are used to train a BRANN (Bayesian-regularized artificial neural network). This in turn is used to drive multi-objective genetic algorithm (MOGA) to find the optimal parameters of VGs in the form of Pareto front. The optimal values of these parameters are finally presented.

A Straight-Bladed Variable-Pitch VAWT Concept for Improved Power Generation

2003 ◽  
Author(s):  
Yann Staelens ◽  
F. Saeed ◽  
I. Paraschivoiu
Keyword(s):  
Power Output ◽  
Angle Of Attack ◽  
Correction Function ◽  
Wind Speeds ◽  
Abrupt Changes ◽  
Effective Angle ◽  
Improved Performance ◽  
Stall Angle ◽  
The Cost ◽  
Local Angle

The paper presents three modifications for an improved performance in terms of increased power output of a straight-bladed VAWT by varying its pitch. Modification I examines the performance of a VAWT when the local angle of attack is kept just below the stall value throughout its rotation cycle. Although this modification results in a very significant increase in the power output for higher wind speeds, it requires abrupt changes in the local angle of attack making it physically and mechanically impossible to realize. Modification II improves upon the first by replacing the local angle of attack by the blade static-stall angle only when the former exceeds the latter. This step eliminates the two jumps in the local effective angle of attack curve but at the cost of a slight decrease in the power output. Moreover, it requires a discontinuous angle of attack correction function which may still be practically difficult to implement and also result in an early fatigue. Modification III overcomes the limitation of the second by ensuring a continuous variation in the local angle of attack correction during the rotation cycle through the use of a sinusoidal function. Although the power output obtained by using this modification is less than the two preceding ones, it has the inherent advantage of being practically feasible.

Interactions of a streamwise-oriented vortex with a finite wing

2015 ◽  
Vol 767 ◽  
pp. 782-810 ◽  
Author(s):  
D. J. Garmann ◽  
M. R. Visbal
Keyword(s):  
Separation Bubble ◽  
Angle Of Attack ◽  
Three Dimensional ◽  
Leading Edge ◽  
Tip Vortex ◽  
Recirculation Region ◽  
Rolling Moment ◽  
Effective Angle ◽  
Finite Wing ◽  
Modes Of Interaction

AbstractA canonical study is developed to investigate the unsteady interactions of a streamwise-oriented vortex impinging upon a finite surface using high-fidelity simulation. As a model problem, an analytically defined vortex superimposed on a free stream is convected towards an aspect-ratio-six ($\mathit{AR}=6$) plate oriented at an angle of ${\it\alpha}=4^{\circ }$ and Reynolds number of $\mathit{Re}=20\,000$ in order to characterize the unsteady modes of interaction resulting from different spanwise positions of the incoming vortex. Outboard, tip-aligned and inboard positioning are shown to produce three distinct flow regimes: when the vortex is positioned outboard of, but in close proximity to, the wingtip, it pairs with the tip vortex to form a dipole that propels itself away from the plate through mutual induction, and also leads to an enhancement of the tip vortex. When the incoming vortex is aligned with the wingtip, the tip vortex is initially strengthened by the proximity of the incident vortex, but both structures attenuate into the wake as instabilities arise in the pair’s feeding sheets from the entrainment of opposite-signed vorticity into either structure. Finally, when the incident vortex is positioned inboard of the wingtip, the vortex bifurcates in the time-mean sense with portions convecting above and below the wing, and the tip vortex is mostly suppressed. The time-mean bifurcation is actually a result of an unsteady spiralling instability in the vortex core that reorients the vortex as it impacts the leading edge, pinches off, and alternately attaches to either side of the wing. The increased effective angle of attack inboard of impingement enhances the three-dimensional recirculation region created by the separated boundary layer off the leading edge which draws fluid from the incident vortex inboard and diminishes its impact on the outboard section of the wing. The slight but remaining downwash present outboard of impingement reduces the effective angle of attack in that region, resulting in a small separation bubble on either side of the wing in the time-mean solution, effectively unloading the tip outboard of impingement and suppressing the tip vortex. All incident vortex positions provide substantial increases in the wing’s lift-to-drag ratio; however, significant sustained rolling moments also result. As the vortex is brought inboard, the rolling moment diminishes and eventually switches sign as the reduced outboard loading balances the augmented sectional lift inboard of impingement.

Sign in / Sign up

Export Citation Format

Share Document