Large-Scale Jet Noise Testing, Reduction and Methods Validation "EXEJET": 4. Flows characterization with PIV in the CEPRA19 anechoic wind tunnel of ONERA

2014 ◽  
Author(s):  
Frédéric David ◽  
Jean-Marc Jourdan ◽  
Franck Cléro ◽  
Jérôme Huber ◽  
Maxime Koenig
Keyword(s):  
Wind Tunnel ◽  
Large Scale ◽  
Jet Noise

A proposed wavy shield for suppression of supersonic jet noise utilizing reflections

2021 ◽  
Vol 20 (1-2) ◽  
pp. 4-34
Author(s):  
Reda R Mankbadi ◽  
Saman Salehian
Keyword(s):  
Large Scale ◽  
Flat Surface ◽  
Near Field ◽  
Supersonic Jet ◽  
Jet Noise ◽  
Dominant Frequency ◽  
Wavy Surface ◽  
Initial Region ◽  
Reflected Waves ◽  
Free Jet

In this work we propose replacing the conventional flat-surface airframe that shields the engine by a wavy surface. The basic principle is to design a wavy pattern to reflect the incoming near-field flow and acoustic perturbations into waves of a particular dominant frequency. The reflected waves will then excite the corresponding frequency of the large-scale structure in the initial region of the jet’s shear layer. By designing the frequency of the reflected waves to be the harmonic of the fundamental frequency that corresponds to the radiated peak noise, the two frequency-modes interact nonlinearly. With the appropriate phase difference, the harmonic dampens the fundamental as it extracts energy from it to amplify. The outcome is a reduction in the peak noise. To evaluate this concept, we conducted Detached Eddy Simulations for a rectangular supersonic jet with and without the wavy shield and verified our numerical results with experimental data for a free jet, as well as, for a jet with an adjacent flat surface. Results show that the proposed wavy surface reduces the jet noise as compared to that of the corresponding flat surface by as much as 4 dB.

scholarly journals Nonintrusive Freestream Velocity Measurement in a Large-Scale Hypersonic Wind Tunnel

AIAA Journal ◽  
2017 ◽  
Vol 55 (10) ◽  
pp. 3611-3616 ◽  
Author(s):  
M. A. Mustafa ◽  
N. J. Parziale ◽  
M. S. Smith ◽  
E. C. Marineau
Keyword(s):  
Wind Tunnel ◽  
Velocity Measurement ◽  
Large Scale ◽  
Freestream Velocity ◽  
Hypersonic Wind Tunnel

Detailed Analysis of the Wake Structure of a Straight-Blade H-Darrieus Wind Turbine by Means of Wind Tunnel Experiments and Computational Fluid Dynamics Simulations

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
Alessandro Bianchini ◽  
Francesco Balduzzi ◽  
Giovanni Ferrara ◽  
Lorenzo Ferrari ◽  
Giacomo Persico ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbines ◽  
Large Scale ◽  
Vertical Axis ◽  
Performance Estimation ◽  
Small Scale ◽  
Dynamics Simulations

Darrieus vertical axis wind turbines (VAWTs) have been recently identified as the most promising solution for new types of applications, such as small-scale installations in complex terrains or offshore large floating platforms. To improve their efficiencies further and make them competitive with those of conventional horizontal axis wind turbines, a more in depth understanding of the physical phenomena that govern the aerodynamics past a rotating Darrieus turbine is needed. Within this context, computational fluid dynamics (CFD) can play a fundamental role, since it represents the only model able to provide a detailed and comprehensive representation of the flow. Due to the complexity of similar simulations, however, the possibility of having reliable and detailed experimental data to be used as validation test cases is pivotal to tune the numerical tools. In this study, a two-dimensional (2D) unsteady Reynolds-averaged Navier–Stokes (U-RANS) computational model was applied to analyze the wake characteristics on the midplane of a small-size H-shaped Darrieus VAWT. The turbine was tested in a large-scale, open-jet wind tunnel, including both performance and wake measurements. Thanks to the availability of such a unique set of experimental data, systematic comparisons between simulations and experiments were carried out for analyzing the structure of the wake and correlating the main macrostructures of the flow to the local aerodynamic features of the airfoils in cycloidal motion. In general, good agreement on the turbine performance estimation was constantly appreciated.

scholarly journals Anisotropic source modelling for turbulent jet noise prediction

2019 ◽  
Vol 377 (2159) ◽  
pp. 20190075 ◽  
Author(s):  
Xihai Xu ◽  
Xiaodong Li
Keyword(s):  
Large Scale ◽  
Noise Source ◽  
Jet Noise ◽  
Source Model ◽  
Noise Prediction ◽  
Reynolds Stresses ◽  
Acoustic Analogy ◽  
Mean Flow ◽  
Navier Stokes Equation ◽  
Anisotropic Source

An anisotropic component of the jet noise source model for the Reynolds-averaged Navier–Stokes equation-based jet noise prediction method is proposed. The modelling is based on Goldstein's generalized acoustic analogy, and both the fine-scale and large-scale turbulent noise sources are considered. To model the anisotropic characteristics of jet noise source, the Reynolds stress tensor is used in place of the turbulent kinetic energy. The Launder–Reece–Rodi model (LRR), combined with Menter's ω -equation for the length scale, with modified coefficients developed by the present authors, is used to calculate the mean flow velocities and Reynolds stresses accurately. Comparison between predicted results and acoustic data has been carried out to verify the accuracy of the new anisotropic source model. This article is part of the theme issue ‘Frontiers of aeroacoustics research: theory, computation and experiment’.

Design of a Large Scale Vertical Stabilizer Wind Tunnel Model for Active Flow Control Research

2012 ◽  
Author(s):  
Glenn Saunders ◽  
Edward Whalen ◽  
Helen Mooney ◽  
Sarah Zaremski
Keyword(s):  
Wind Tunnel ◽  
Flow Control ◽  
Large Scale ◽  
Active Flow Control ◽  
Scale Model ◽  
Tunnel Model ◽  
Control Research ◽  
Model Geometry ◽  
Design Requirements ◽  
Active Flow

The design, fabrication and installation of an approximately 1/6 scale model of an aircraft vertical stabilizer for research in Active Flow Control (AFC) is discussed. Highlighted are the unique design requirements of wind tunnel models, the specialized fabrication techniques employed to create them and the required close collaboration between industry, government and three academic institutions. The design of the model involves often competing constraints imposed by structural, instrumentation, aerodynamic, manufacturability and research-agenda considerations as well as cost and schedule. Instrumentation requires hundreds of pressure ports and six-axis force/torque sensing. Aerodynamic considerations necessitate high manufacturing precision, highly-skilled fabrication techniques and careful observance of model geometry throughout the design and fabrication processes. A scale model of a vertical stabilizer for AFC research was successfully designed, fabricated and deployed. The collaboratively designed model satisfies the structural, aerodynamic and research design constraints, and furthers the state of the art in Active Flow Control research.

Wind Tunnel Experiments of Large Scale turbulence generated on Roughness Surface

2002 ◽  
Vol 2002.3 (0) ◽  
pp. 69-70
Author(s):  
Nobumasa SEKISHITA ◽  
Hideharu MAKITA ◽  
Shirohisa KOBAYASHI
Keyword(s):  
Wind Tunnel ◽  
Large Scale ◽  
Wind Tunnel Experiments ◽  
Roughness Surface ◽  
Scale Turbulence
Sign in / Sign up

Export Citation Format

Share Document