Analysis of High Speed Jet Flow Physics with Time-Resolved PIV

2014 ◽  
Author(s):  
Zachary P. Berger ◽  
Matthew G. Berry ◽  
Patrick R. Shea ◽  
Mark N. Glauser ◽  
Naibo Jiang ◽  
...  
Keyword(s):  
High Speed ◽  
Jet Flow ◽  
Time Resolved ◽  
Flow Physics

Multiple phase transitions investigated by high-speed TEM

1990 ◽  
Vol 48 (4) ◽  
pp. 550-551
Author(s):  
Oleg Bostanjoglo ◽  
Peter Thomsen-Schmidt
Keyword(s):  
Phase Transitions ◽  
High Speed ◽  
Short Exposure ◽  
Semiconductor Film ◽  
Time Resolved ◽  
Short Exposure Time ◽  
Multiple Phase ◽  
Model Substance ◽  
History Of ◽  
Electron Image

Thin GexTe1-x (x = 0.15-0.8) were studied as a model substance of a composite semiconductor film, in addition being of interest for optical storage material. Two complementary modes of time-resolved TEM were used to trace the phase transitions, induced by an attached Q-switched (50 ns FWHM) and frequency doubled (532 nm) Nd:YAG laser. The laser radiation was focused onto the specimen within the TEM to a 20 μm spot (FWHM). Discrete intermediate states were visualized by short-exposure time doubleframe imaging /1,2/. The full history of a transformation was gained by tracking the electron image intensity with photomultiplier and storage oscilloscopes (space/time resolution 100 nm/3 ns) /3/. In order to avoid radiation damage by the probing electron beam to detector and specimen, the beam is pulsed in this continuous mode of time-resolved TEM,too.Short events ( <2 μs) are followed by illuminating with an extended single electron pulse (fig. 1c)

scholarly journals Dual-shot dynamics and ultimate frequency of all-optical magnetic recording on GdFeCo

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Sicong Wang ◽  
Chen Wei ◽  
Yuanhua Feng ◽  
Hongkun Cao ◽  
Wenzhe Li ◽  
...  
Keyword(s):  
Magnetization Reversal ◽  
Energy Efficient ◽  
High Speed ◽  
Data Transfer ◽  
Laser Pulses ◽  
Time Resolved ◽  
All Optical ◽  
Fs Laser ◽  
High Speed Data ◽  
Natural Way

AbstractAlthough photonics presents the fastest and most energy-efficient method of data transfer, magnetism still offers the cheapest and most natural way to store data. The ultrafast and energy-efficient optical control of magnetism is presently a missing technological link that prevents us from reaching the next evolution in information processing. The discovery of all-optical magnetization reversal in GdFeCo with the help of 100 fs laser pulses has further aroused intense interest in this compelling problem. Although the applicability of this approach to high-speed data processing depends vitally on the maximum repetition rate of the switching, the latter remains virtually unknown. Here we experimentally unveil the ultimate frequency of repetitive all-optical magnetization reversal through time-resolved studies of the dual-shot magnetization dynamics in Gd27Fe63.87Co9.13. Varying the intensities of the shots and the shot-to-shot separation, we reveal the conditions for ultrafast writing and the fastest possible restoration of magnetic bits. It is shown that although magnetic writing launched by the first shot is completed after 100 ps, a reliable rewriting of the bit by the second shot requires separating the shots by at least 300 ps. Using two shots partially overlapping in space and minimally separated by 300 ps, we demonstrate an approach for GHz magnetic writing that can be scaled down to sizes below the diffraction limit.

Detector commissioning and development for PETRA-III

2010 ◽  
Vol 1 (SRMS-7) ◽  
Author(s):  
David Pennicard ◽  
Heinz Graafsma ◽  
Michael Lohmann
Keyword(s):  
High Speed ◽  
Materials Science ◽  
Dynamic Range ◽  
Photon Counting ◽  
High Energy ◽  
X Rays ◽  
Silicon Detectors ◽  
Time Resolved ◽  
Wide Range ◽  
Synchrotron Light

The new synchrotron light source PETRA-III produced its first beam last year. The extremely high brilliance of PETRA-III and the large energy range of many of its beamlines make it useful for a wide range of experiments, particularly in materials science. The detectors at PETRA-III will need to meet several requirements, such as operation across a wide dynamic range, high-speed readout and good quantum efficiency even at high photon energies. PETRA-III beamlines with lower photon energies will typically be equipped with photon-counting silicon detectors for two-dimensional detection and silicon drift detectors for spectroscopy and higher-energy beamlines will use scintillators coupled to cameras or photomultiplier tubes. Longer-term developments include ‘high-Z’ semiconductors for detecting high-energy X-rays, photon-counting readout chips with smaller pixels and higher frame rates and pixellated avalanche photodiodes for time-resolved experiments.

Time-Resolved Micro Liquid Desorption Mass Spectrometry: Mechanism, Features, and Kinetic Applications

2006 ◽  
Vol 59 (2) ◽  
pp. 81 ◽  
Author(s):  
Ales Charvat ◽  
Andreas Bógehold ◽  
Bernd Abel
Keyword(s):  
Mass Spectrometry ◽  
Liquid Phase ◽  
High Speed ◽  
High Performance ◽  
Kinetic Studies ◽  
Solution Concentration ◽  
Bulk Water ◽  
Laser Wavelength ◽  
Time Resolved ◽  
Desorption Mass Spectrometry

Liquid water beam desorption mass spectrometry is an intriguing technique to isolate charged molecular aggregates directly from the liquid phase and to analyze them employing sensitive mass spectrometry. The liquid phase in this approach consists of a 10 µm diameter free liquid filament in vacuum which is irradiated by a focussed infrared laser pulse resonant with the OH-stretch vibration of bulk water. Depending upon the laser wavelength, charged (e.g. protonated) macromolecules are isolated from solution through a still poorly characterized mechanism. After the gentle liquid-to-vacuum transfer the low-charge-state aggregates are analyzed using time-of-flight mass spectrometry. A recent variant of the technique uses high performance liquid chromatography valves for local liquid injections of samples in the liquid carrier beam, which enables very low sample consumption and high speed sample analysis. In this review we summarize recent work to characterize the ‘desorption’ or ion isolation mechanism in this type of experiment. A decisive and interesting feature of micro liquid beam desorption mass spectrometry is that — under certain conditions — the gas-phase mass signal for a large number of small as well as supramolecular systems displays a surprisingly linear response on the solution concentration over many orders of magnitude, even for mixtures and complex body fluids. This feature and the all-liquid state nature of the technique makes this technique a solution-type spectroscopy that enables real kinetic studies involving (bio)polymers in solution without the need for internal standards. Two applications of the technique monitoring enzyme digestion of proteins and protein aggregation of an amyloid model system are highlighted, both displaying its potential for monitoring biokinetics in solution.

scholarly journals Experimental Study of Transient Mechanisms of Bi-Stable Flame Shape Transitions in a Swirl Combustor

2017 ◽  
Author(s):  
Michael Stöhr ◽  
Kilian Oberleithner ◽  
Moritz Sieber ◽  
Zhiyao Yin ◽  
Wolfgang Meier
Keyword(s):  
Gas Turbines ◽  
High Speed ◽  
Hydrodynamic Instability ◽  
Mean Flow ◽  
Swirl Combustor ◽  
Time Resolved ◽  
Precessing Vortex Core ◽  
Amplification Process ◽  
Flame Shape ◽  
Shape Transitions

Sudden changes of flame shape are an undesired, yet poorly understood feature of swirl combustors used in gas turbines. The present work studies flame shape transition mechanisms of a bistable turbulent swirl flame in a gas turbine model combustor, which alternates intermittently between an attached V-form and a lifted M-form. Time-resolved velocity fields and 2D flame structures were measured simultaneously using high-speed stereo-PIV and OH-PLIF at 10 kHz. The data analysis is performed using two novel methods that are well adapted to the study of transient flame shape transitions: Firstly, the linear stability analysis (LSA) of a time-varying mean flow and secondly the recently proposed spectral proper orthogonal decomposition (SPOD). The results show that the transitions are governed by two types of instability, namely a hydrodynamic instability in the form of a precessing vortex core (PVC) and a thermoacoustic (TA) instability. The LSA shows that the V-M transition implies the transient formation of a PVC as the result of a self-amplification process. The V-M transition, on the other hand, is induced by the appearance of a TA instability that suppresses the PVC and thereby modifies the flow field such that the flame re-attaches at the nozzle. In summary these results provide novel insights into the complex interactions of TA and hydrodynamic instabilities that govern the shape of turbulent swirl-stabilized flames.

Visualization and Time-Resolved Particle Image Velocimetry Measurements of the Flow in the Tip Region of a Subsonic Compressor Rotor

2014 ◽  
Vol 137 (4) ◽  
Author(s):  
David Tan ◽  
Yuanchao Li ◽  
Ian Wilkes ◽  
Rinaldo L. Miorini ◽  
Joseph Katz
Keyword(s):  
Flow Rate ◽  
High Speed ◽  
Axial Compressor ◽  
Time Resolved ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Direct Measurements ◽  
Image Velocimetry ◽  
The One ◽  
And Behavior

A new optically index matched facility has been constructed to investigate tip flows in compressor-like settings. The blades of the one and a half stage compressor have the same geometry, but lower aspect ratio as the inlet guide vanes (IGVs) and the first stage of the low-speed axial compressor (LSAC) facility at NASA Glenn. With transparent blades and casings, the new setup enables unobstructed velocity measurements at any point within the tip region and is designed to facilitate direct measurements of effects of casing treatments on the flow structure. We start with a smooth endwall casing. High speed movies of cavitation and time-resolved PIV measurements have been used to characterize the location, trajectory, and behavior of the tip leakage vortex (TLV) for two flow rates, the lower one representing prestall conditions. Results of both methods show consistent trends. As the flow rate is reduced, TLV rollup occurs further upstream, and its initial orientation becomes more circumferential. At prestall conditions, the TLV is initially aligned slightly upstream of the rotor passage, and subsequently forced downstream. Within the passage, the TLV breaks up into a large number of vortex fragments, which occupy a broad area. Consequently, the cavitation in the TLV core disappears. With decreasing flow rate, this phenomenon becomes more abrupt, occurs further upstream, and the fragments occupy a larger area.

Sign in / Sign up

Export Citation Format

Share Document