Influence of resolution and Reynolds number on large-eddy simulations of channel flow using relaxation filtering

2013 ◽  
Author(s):  
Francois Kremer ◽  
Christophe Bogey ◽  
Christophe Bailly
Keyword(s):  
Reynolds Number ◽  
Channel Flow ◽  
Large Eddy Simulations ◽  
Large Eddy

LES Simulations of Rotating Two-Pass Ribbed Duct With Coriolis and Centrifugal Buoyancy Forces at Re=100,000

2016 ◽  
Author(s):  
Cody Dowd ◽  
Danesh Tafti
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Large Eddy Simulations ◽  
The Other ◽  
Coriolis Forces ◽  
Flow And Heat Transfer ◽  
Large Eddy ◽  
Buoyancy Forces ◽  
First Pass ◽  
Duct Geometry

The focus of this research is to predict the flow and heat transfer in a rotating two-pass duct geometry with staggered ribs using Large-Eddy Simulations (LES). The geometry consists of a U-Bend with 17 ribs in each pass. The ribs are staggered with an e/Dh = 0.1 and P/e = 10. LES is performed at a Reynolds number of 100,000, a rotation number of 0.2 and buoyancy parameters (Bo) of 0.5 and 1.0. The effects of Coriolis forces and centrifugal buoyancy are isolated and studied individually. In all cases it is found that increasing Bo from 0.5 to 1.0 at Ro = 0.2 has little impact on heat transfer. It is found that in the first pass, the heat transfer is quite receptive to Coriolis forces which augment and attenuate heat transfer at the trailing and leading walls, respectively. Centrifugal buoyancy, on the other hand has a bigger effect in augmenting heat transfer at the trailing wall than in attenuating heat transfer at the leading wall. On contrary, it aids heat transfer in the second half of the first pass at the leading wall by energizing the flow near the wall. The heat transfer in the second pass is dominated by the highly turbulent flow exiting the bend. Coriolis forces have no impact on the augmentation of heat transfer on the leading wall till the second half of the passage whereas it attenuates heat transfer at the trailing wall as soon as the flow exits the bend. Contrary to phenomenological arguments, inclusion of centrifugal buoyancy augments heat transfer over Coriolis forces alone on both the leading and trailing walls of the second pass.

scholarly journals Quasi-periodic forces and conditionally averaged characteristics of unsteady cavitation flow around a hydrofoil

2021 ◽  
Vol 2119 (1) ◽  
pp. 012030
Author(s):  
E I Ivashchenko ◽  
M Yu Hrebtov ◽  
R I Mullyadzhanov
Keyword(s):  
Reynolds Number ◽  
Liquid Phase ◽  
High Reynolds Number ◽  
Velocity Fields ◽  
Large Eddy Simulations ◽  
Two Dimensional ◽  
Cavitation Flow ◽  
Large Eddy ◽  
High Reynolds ◽  
Conditional Averaging

Abstract Large-eddy simulations are performed to investigate the cavitating flow around two dimensional hydrofoil section with angle of attack of 9° and high Reynolds number of 1.3×106. We use the Schnerr-Sauer model for accurate phase transitions modelling. Instantaneous velocity fields are compared successfully with PIV data using the methodology of conditional averaging to take into account only the liquid phase characteristics as in PIV. The presence of two frequencies in a spectrum corresponding to the full and partial cavity detachments is analysed.

Large-Eddy Simulations of Wall Bounded Turbulent Flows Using Unstructured Linear Reconstruction Techniques

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Dario Amirante ◽  
Nicholas J. Hills
Keyword(s):  
Reynolds Number ◽  
Turbulent Flows ◽  
Outer Radius ◽  
Large Eddy Simulations ◽  
Test Cases ◽  
Mean Flow ◽  
Flow Equations ◽  
Turbulent Statistics ◽  
Large Eddy ◽  
Least Squares Approach

Large-eddy simulations (LES) of wall bounded, low Mach number turbulent flows are conducted using an unstructured finite-volume solver of the compressible flow equations. The numerical method employs linear reconstructions of the primitive variables based on the least-squares approach of Barth. The standard Smagorinsky model is adopted as the subgrid term. The artificial viscosity inherent to the spatial discretization is maintained as low as possible reducing the dissipative contribution embedded in the approximate Riemann solver to the minimum necessary. Comparisons are also discussed with the results obtained using the implicit LES (ILES) procedure. Two canonical test-cases are described: a fully developed pipe flow at a bulk Reynolds number Reb = 44 × 103 based on the pipe diameter, and a confined rotor–stator flow at the rotational Reynolds number ReΩ = 4 × 105 based on the outer radius. In both cases, the mean flow and the turbulent statistics agree well with existing direct numerical simulations (DNS) or experimental data.

Sign in / Sign up

Export Citation Format

Share Document