scholarly journals High-Fidelity Charring Ablator Thermal Response Model

2011 ◽  
Author(s):  
Nagi Mansour ◽  
Jean Lachaud ◽  
Thierry Magin ◽  
Julien de Mûelenaere ◽  
Yih-Kanq Chen
Keyword(s):  
Thermal Response ◽  
High Fidelity ◽  
Response Model

scholarly journals High-Fidelity Calculation of Effective Thermal Response of Composite Media With Heat Generation Source

2020 ◽  
Author(s):  
Kevin Irick ◽  
Nima Fathi
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Behavior ◽  
Nuclear Fuel ◽  
Heat Generation ◽  
Thermal Response ◽  
Thermal Conditions ◽  
Unit Cell ◽  
High Fidelity ◽  
Conductive Heat

Abstract The complexity of conductive heat transfer in a structure increases with heterogeneity (e.g., multi-component solid-phase systems with a source of internal thermal heat generation). Any discontinuity of material property — especially thermal conductivity — would warrant a thorough analysis to evaluate the thermal behavior of the system of interest. Heterogeneous thermal conditions are crucial to heat transfer in nuclear fuel assemblies, because the thermal behavior within the assemblies is governed significantly by the heterogeneous thermal conditions at both the system and component levels. A variety of materials have been used as nuclear fuels, the most conventional of which is uranium dioxide, UO2. UO2 has satisfactory chemical and irradiation tolerances in thermal reactors, whereas the low thermal conductivity of porous UO2 can prove challenging. Therefore, the feasibility of enhancing the thermal conductivity of oxide fuels by adding a high-conductivity secondary solid component is still an important ongoing topic of investigation. Undoubtedly, long-term, stable development of clean nuclear energy would depend on research and development of innovative reactor designs and fuel systems. Having a better understanding of the thermal response of the unit cell of a composite that represents a fuel matrix cell would help to develop the next generation of nuclear fuel and understand potential performance enhancements. The aim of this article is to provide an assessment of a high-fidelity computational model response of heterogeneous materials with heat generation in circular fillers. Two-dimensional, steady-state systems were defined with a circular, heat-generating filler centered in a unit-cell domain. A Fortran-based finite element method (FEM) code was used to solve the heat equation on an unstructured triangular mesh of the systems. This paper presents a study on the effects of a heat-generating filler material’s relative size and thermal conductivity on effective thermal conductance, Geff, within a heterogenous material. Code verification using the method of manufactured solution (MMS) was employed, showing a second-order accurate numerical implementation. Solution verification was performed using a global deviation grid convergence index (GCI) method to assess solution convergence and estimate solution numerical uncertainty, Unum. Trend results are presented, showing variable response in Geff to filler size and thermal conductivity.

A simplified thermal response model

1987 ◽  
Vol 8 (1) ◽  
pp. 13-19 ◽  
Author(s):  
J A Crabb ◽  
N Murdoch ◽  
J M Penman
Keyword(s):  
Thermal Response ◽  
Response Model

scholarly journals Research on the End-Face Distribution of Rotational Molding Heating Gun Based on Numerical Simulation Method

Processes ◽  
2022 ◽  
Vol 10 (1) ◽  
pp. 97
Author(s):  
Yongchun Yan ◽  
Lixin Zhang ◽  
Xiao Ma ◽  
Huan Wang ◽  
Wendong Wang ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Temperature Field ◽  
Field Distribution ◽  
Thermal Response ◽  
Response Model ◽  
Wall Surface ◽  
Rotational Molding ◽  
Temperature Field Distribution ◽  
Fire Dynamics ◽  
Validation Experiment

The distribution of heating gun ends plays a decisive role in the sidewall properties of finished rotomolded products. To obtain the optimal distribution of the end face of a rotational molding heating gun, the temperature response of the end-face mold under heating gun heating was investigated, and an analysis method based on numerical simulation is proposed. The FDS (fire dynamics simulator) was used to construct a heating model of the heating gun, simulate and obtain a heatmap of the temperature field distribution of a heating gun of Φ30–70 mm, and determine the optimal diameter and heating distance of the heating gun. ANSYS was used to establish the thermal response model of the heat-affected mold, which was combined with the mold structure and thermophysical properties of steel. A temperature field distribution on the inner wall surface of Φ30, Φ50, and Φ70 mm heating guns when heating at each diameter of the end face was obtained and the distribution position of the end face of each diameter heating gun was determined. ANSYS was used to establish the thermal response model of the end-face mold and obtain the temperature field distribution of the inner wall surface of the end-face mold. The size of the heat-affected area of each diameter heating gun was combined, the end-face heating gun distribution was optimized, and the optimal heating gun end-face distribution was obtained. An experimental platform was built, and a validation experiment was set up. Through the analysis and processing of the data of three experiments, the temperature variation curve of each diameter on the inner surface of the end-face mold was obtained. We compare and analyze the simulation and experimental results to determine the feasibility of the FDS + ANSYS method and the correctness and accuracy of the simulation model and the results.

Sign in / Sign up

Export Citation Format

Share Document