Three-Dimensional Turbulent Flow Separation in Diffusers

2010 ◽  
Author(s):  
Elbert Jeyapaul ◽  
Paul Durbin
Keyword(s):  
Turbulent Flow ◽  
Flow Separation ◽  
Three Dimensional

Analysis of Flow Separation in an Annular Expansion—Contraction With Inner Cylinder Rotating

1973 ◽  
Vol 95 (4) ◽  
pp. 485-492 ◽  
Author(s):  
G. F. Dailey ◽  
G. E. Geiger
Keyword(s):  
Turbulent Flow ◽  
Numerical Solution ◽  
Steady Flow ◽  
Flow Separation ◽  
Static Pressure ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Air Bubbles ◽  
Theoretical Computer ◽  
Laminar Separation

A three-dimensional incompressible isothermal laminar separation of a Newtonian fluid in transient and steady flow was investigated. The geometry chosen for this study was an annular expansion-contraction chamber with a rotating inner cylinder. It was found that an adaptation of a numerical solution first proposed by Fromm gave converged solutions for all Reynolds numbers in the laminar range. Theoretical computer plotted streamline patterns were superimposed on time exposure photographs of air bubbles in transparent oil. Measured static pressure differentials were compared with laminar theory. Turbulent flow was studied experimentally.

scholarly journals Interactions between Tandem Cylinders in an Open Channel: Impact on Mean and Turbulent Flow Characteristics

Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1718
Author(s):  
Hasan Zobeyer ◽  
Abul B. M. Baki ◽  
Saika Nowshin Nowrin
Keyword(s):  
Turbulent Flow ◽  
Open Channel ◽  
Recirculation Zone ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Flow Recirculation ◽  
Tandem Cylinders ◽  
Flow Development ◽  
The Mean ◽  
Recirculation Length

The flow hydrodynamics around a single cylinder differ significantly from the flow fields around two cylinders in a tandem or side-by-side arrangement. In this study, the experimental results on the mean and turbulence characteristics of flow generated by a pair of cylinders placed in tandem in an open-channel flume are presented. An acoustic Doppler velocimeter (ADV) was used to measure the instantaneous three-dimensional velocity components. This study investigated the effect of cylinder spacing at 3D, 6D, and 9D (center to center) distances on the mean and turbulent flow profiles and the distribution of near-bed shear stress behind the tandem cylinders in the plane of symmetry, where D is the cylinder diameter. The results revealed that the downstream cylinder influenced the flow development between cylinders (i.e., midstream) with 3D, 6D, and 9D spacing. However, the downstream cylinder controlled the flow recirculation length midstream for the 3D distance and showed zero interruption in the 6D and 9D distances. The peak of the turbulent metrics generally occurred near the end of the recirculation zone in all scenarios.

scholarly journals Steady flow separation patterns in a 45 degree junction

2000 ◽  
Vol 411 ◽  
pp. 1-38 ◽  
Author(s):  
C. ROSS ETHIER ◽  
SUJATA PRAKASH ◽  
DAVID A. STEINMAN ◽  
RICHARD L. LEASK ◽  
GREGORY G. COUCH ◽  
...  
Keyword(s):  
Flow Separation ◽  
Stokes Equations ◽  
Bypass Graft ◽  
Three Dimensional ◽  
Symmetry Plane ◽  
Axial Flow ◽  
Reynolds Numbers ◽  
Secondary Flows ◽  
Measured Velocity ◽  
Curved Tube

Numerical and experimental techniques were used to study the physics of flow separation for steady internal flow in a 45° junction geometry, such as that observed between two pipes or between the downstream end of a bypass graft and an artery. The three-dimensional Navier–Stokes equations were solved using a validated finite element code, and complementary experiments were performed using the photochromic dye tracer technique. Inlet Reynolds numbers in the range 250 to 1650 were considered. An adaptive mesh refinement approach was adopted to ensure grid-independent solutions. Good agreement was observed between the numerical results and the experimentally measured velocity fields; however, the wall shear stress agreement was less satisfactory. Just distal to the ‘toe’ of the junction, axial flow separation was observed for all Reynolds numbers greater than 250. Further downstream (approximately 1.3 diameters from the toe), the axial flow again separated for Re [ges ] 450. The location and structure of axial flow separation in this geometry is controlled by secondary flows, which at sufficiently high Re create free stagnation points on the model symmetry plane. In fact, separation in this flow is best explained by a secondary flow boundary layer collision model, analogous to that proposed for flow in the entry region of a curved tube. Novel features of this flow include axial flow separation at modest Re (as compared to flow in a curved tube, where separation occurs only at much higher Re), and the existence and interaction of two distinct three-dimensional separation zones.

Turbulent flow between counter-rotating concentric cylinders: a direct numerical simulation study

2008 ◽  
Vol 615 ◽  
pp. 371-399 ◽  
Author(s):  
S. DONG
Keyword(s):  
Turbulent Flow ◽  
Large Scale ◽  
Outer Cylinder ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Taylor Vortex ◽  
Small Scale ◽  
Mean Flow ◽  
Concentric Cylinders ◽  
High Reynolds

We report three-dimensional direct numerical simulations of the turbulent flow between counter-rotating concentric cylinders with a radius ratio 0.5. The inner- and outer-cylinder Reynolds numbers have the same magnitude, which ranges from 500 to 4000 in the simulations. We show that with the increase of Reynolds number, the prevailing structures in the flow are azimuthal vortices with scales much smaller than the cylinder gap. At high Reynolds numbers, while the instantaneous small-scale vortices permeate the entire domain, the large-scale Taylor vortex motions manifested by the time-averaged field do not penetrate a layer of fluid near the outer cylinder. Comparisons between the standard Taylor–Couette system (rotating inner cylinder, fixed outer cylinder) and the counter-rotating system demonstrate the profound effects of the Coriolis force on the mean flow and other statistical quantities. The dynamical and statistical features of the flow have been investigated in detail.

scholarly journals Accumulation of motile elongated micro-organisms in turbulence

2013 ◽  
Vol 739 ◽  
pp. 22-36 ◽  
Author(s):  
Caijuan Zhan ◽  
Gaetano Sardina ◽  
Enkeleida Lushi ◽  
Luca Brandt
Keyword(s):  
Turbulent Flow ◽  
Three Dimensional ◽  
Laminar Flows ◽  
Marine Life ◽  
Prolate Spheroids ◽  
Linear Shear ◽  
Local Shear ◽  
Micro Organisms ◽  
Hydrodynamic Effects ◽  
Preferential Alignment

AbstractWe study the effect of turbulence on marine life by performing numerical simulations of motile micro-organisms, modelled as prolate spheroids, in isotropic homogeneous turbulence. We show that the clustering and patchiness observed in laminar flows, linear shear and vortex flows, are significantly reduced in a three-dimensional turbulent flow mainly because of the complex topology; elongated micro-organisms show some level of clustering in the case of swimmers without any preferential alignment whereas spherical swimmers remain uniformly distributed. Micro-organisms with one preferential swimming direction (e.g. gyrotaxis) still show significant clustering if spherical in shape, whereas prolate swimmers remain more uniformly distributed. Due to their large sensitivity to the local shear, these elongated swimmers react more slowly to the action of vorticity and gravity and therefore do not have time to accumulate in a turbulent flow. These results show how purely hydrodynamic effects can alter the ecology of micro-organisms that can vary their shape and their preferential orientation.

Sign in / Sign up

Export Citation Format

Share Document