Energy Absorption Performance of a Eco-Core - A Syntactic Foam

2007 ◽  
Author(s):  
Raghu Panduranga ◽  
Kunigal Shivakumar ◽  
Larry Russell
Keyword(s):  
Energy Absorption ◽  
Syntactic Foam ◽  
Absorption Performance

Multi-objective design optimization of additively manufactured lattice structures for improved energy absorption performance

2021 ◽  
pp. 095440622199554
Author(s):  
Recep M Gorguluarslan
Keyword(s):  
Energy Absorption ◽  
Response Surfaces ◽  
Optimization Process ◽  
Truss Optimization ◽  
Size Optimization ◽  
Lattice Structures ◽  
Multi Objective ◽  
Lattice Design ◽  
Highly Nonlinear ◽  
Absorption Performance

This paper aims to improve the energy absorption performance of stiffness-optimized lattice structures by utilizing a multi-objective surrogate-based size optimization that considers the additive manufacturing (AM) constraints such as the minimum printable size. A truss optimization is first utilized at the unit cell level under static compressive loads for stiffness maximization and two optimized lattice configurations called the Face-Body Centered Cubic (FBCC) lattice and the Octet Cubic (OC) are obtained. A multi-objective size optimization process is then carried out to improve the energy absorption capabilities of those lattice designs using non-linear compression simulations with Nylon12 material to be fabricated by the Multi Jet Fusion (MJF) AM process. Thin plate spline (TPS) interpolation method is found to produce very high accuracy as the surrogate model to predict the highly nonlinear response surfaces of energy absorption objectives in the optimization. Compared to the lattice designs with uniform strut diameters, by using the optimization process, the maximum energy absorption efficiency ( EAEm) and the crush stress efficiency ( CSE) of the OC lattice design are further improved up to 33% and 37%, respectively. The FBCC lattice design is also found to have superior EAEm performance compared to the existing lattice types considered for fabricating by the MJF process in the literature.

Bending Behavior of Simply-Supported Sandwich Beams Subjected to Large Deflection

2018 ◽  
Vol 777 ◽  
pp. 569-574
Author(s):  
Zhong You Xie
Keyword(s):  
Energy Absorption ◽  
Large Deflection ◽  
Absorption Efficiency ◽  
Sandwich Beams ◽  
Element Simulation ◽  
Energy Absorption Efficiency ◽  
Load Carrying ◽  
Absorption Performance ◽  
Bending Behavior ◽  
The Moment

Due to thin skins and soft core, it is apt to local indentation inducing the concurrence of geometrical and material nonlinearity in sandwich structures. In the paper, finite element simulation is used to investigate the bending behavior of lightweight sandwich beams under large deflection. A modified formulation for the moment at mid-span section of sandwich beams under large deflection is presented, and energy absorption performance is assessed based on energy absorption efficiency. In addition, it is found that no local indentation arises initially, while later that increases gradually with loading displacement increasing. The height of the mid-span section as well as load-carrying capacity decreases significantly with local indentation depth increasing.

Computational Modeling and Energy Absorption Behavior of Thin-Walled Tubes with the Kresling Origami Pattern

2021 ◽  
Vol 62 (2) ◽  
pp. 71-81
Author(s):  
Jiaqiang Li ◽  
Yao Chen ◽  
Xiaodong Feng ◽  
Jian Feng ◽  
Pooya Sareh
Keyword(s):  
Energy Absorption ◽  
Material Properties ◽  
Rotation Angle ◽  
Programming Model ◽  
Mixed Integer ◽  
Element Analysis ◽  
Cross Sectional ◽  
Thin Walled Tube ◽  
Absorption Performance ◽  
Thin Walled

Origami structures have been widely used in various engineering fields due to their desirable properties such as geometric transformability and high specific energy absorption. Based on the Kresling origami pattern, this study proposes a type of thin-walled origami tube the structural configuration of which is found by a mixed-integer linear programming model. Using finite element analysis, a reasonable configuration of a thin-walled tube with the Kresling pattern is firstly analyzed. Then, the influences of different material properties, the rotation angle of the upper and lower sections of the tube unit, and cross-sectional shapes on the energy absorption behavior of the thin-walled tubes under axial compression are evaluated. The results show that the symmetric thin-walled tube with the Kresling pattern is a reasonable choice for energy absorption purposes. Compared with thin-walled prismatic tubes, the thin-walled tube with the Kresling pattern substantially reduces the initial peak force and the average crushing force, without significantly reducing its energy absorption capacity; moreover, it enters the plastic energy dissipation stage ahead of time, giving it a superior energy absorption performance. Besides, the material properties, rotation angle, and cross-sectional shape have considerable influences on its energy absorption performance. The results provide a basis for the application of the Kresling origami pattern in the design of thin-walled energy-absorbingstructures.

Dynamic crushing and energy absorption performance of newly designed multitubular structures

2020 ◽  
Vol 27 ◽  
pp. 1928-1933
Author(s):  
J. Nagarjun ◽  
A. Praveen Kumar ◽  
K. Yamini Reddy ◽  
L. Ponraj Sankar
Keyword(s):  
Energy Absorption ◽  
Absorption Performance ◽  
Dynamic Crushing
Sign in / Sign up

Export Citation Format

Share Document