Heat Transfer Performance of a Porous Metal Foam/Phase Change Material System, Part 2: Melting

2006 ◽  
Author(s):  
Ali Siahpush ◽  
J. O'Brien
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Phase Change Material ◽  
Heat Transfer Performance ◽  
Metal Foam ◽  
Porous Metal ◽  
Material System ◽  
Transfer Performance ◽  
System Part ◽  
Change Material

Heat Transfer Performance of a Porous Metal Foam/Phase Change Material System: Part 1 — Freezing

2005 ◽  
Author(s):  
A. S. Siahpush ◽  
J. E. O’Brien ◽  
B. Williams
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Phase Change ◽  
Heat Transfer Performance ◽  
Metal Foam ◽  
Porous Metal ◽  
Transfer Performance ◽  
Solid Liquid ◽  
Change Material

A detailed experimental study has been performed to evaluate the heat transfer performance of a solid/liquid phase-change thermal energy storage system that includes porous metal foam. The phase-change material (PCM) and metal foam were contained in a vertically oriented test cylinder that is cooled at its outside boundary, resulting in radially inward freezing. As the PCM freezes, the solid/liquid interface moves inward from the surface of the test cylinder, and a thermal resistance layer is built up, resulting in a reduced heat transfer rate between the system to be cooled and the PCM. The porous material used in this research was intended to minimize the insulating effect of this thermal resistance layer. In the freezing case study, a one-dimensional mathematical model was developed, which considered heat conduction as the only mode of heat transfer. The effective thermal conductivity of the porous media saturated with solid eicosane was predicted utilizing several models and compared with the measured effective thermal conductivity. The results of this study are discussed in terms of the effectiveness of the metal foam as a heat transfer enhancement device.

STUDY ON SOLIDIFICATION OF PHASE CHANGE MATERIAL IN FRACTAL POROUS METAL FOAM

Fractals ◽  
2015 ◽  
Vol 23 (01) ◽  
pp. 1540003 ◽  
Author(s):  
CHENGBIN ZHANG ◽  
LIANGYU WU ◽  
YONGPING CHEN
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Pore Structure ◽  
Phase Change Material ◽  
Fractal Structure ◽  
Metal Foam ◽  
Porous Metal ◽  
Solid Matrix ◽  
Transfer Model ◽  
Change Material

The Sierpinski fractal is introduced to construct the porous metal foam. Based on this fractal description, an unsteady heat transfer model accompanied with solidification phase change in fractal porous metal foam embedded with phase change material (PCM) is developed and numerically analyzed. The heat transfer processes associated with solidification of PCM embedded in fractal structure is investigated and compared with that in single-pore structure. The results indicate that, for the solidification of phase change material in fractal porous metal foam, the PCM is dispersedly distributed in metal foam and the existence of porous metal matrix provides a fast heat flow channel both horizontally and vertically, which induces the enhancement of interstitial heat transfer between the solid matrix and PCM. The solidification performance of the PCM, which is represented by liquid fraction and solidification time, in fractal structure is superior to that in single-pore structure.

Preparation and Numerical Simulation of Heat Transfer Performance for Methyl Palmitate-Methyl Stearate Binary Eutectic Mixture/Expanded Graphite Composite Phase Change Material

2020 ◽  
Vol 993 ◽  
pp. 920-926
Author(s):  
Bi Chuan Chi ◽  
Yan Yao ◽  
Su Ping Cui
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Phase Change Material ◽  
Phase Change Materials ◽  
Heat Transfer Performance ◽  
Eutectic Mixture ◽  
Fatty Acid Esters ◽  
Transfer Performance ◽  
Binary Eutectic ◽  
Change Material

The binary eutectic mixtures of fatty acid esters are promising phase change materials for energy storage application. However, the low thermal conductivity which is a common problem for organic phase change materials restricts their further and better applications. In order to solve the problem, a novel composite phase change material (CPCM) was prepared in this research by using methyl palmitate-methyl stearate (MP-MS), a typical binary eutectic mixture of fatty acid esters, as phase change material and expanded graphite (EG) as heat transfer enhancer. The heat transfer performance of MP-MS/EG CPCM was numerical simulated by finite element analysis software ABAQUS. Numerical simulation results revealed that EG could notably enhance the heat transfer performance of MP-MS eutectic mixture. The heat transfer rate and phase change reaction rate of MP-MS/EG CPCM were 14 times and 3 times that of MP-MS eutectic mixture, respectively.

scholarly journals n-Eicosane-Fe3O4@SiO2@Cu microcapsule phase change material and its improved thermal conductivity and heat transfer performance

2021 ◽  
Vol 198 ◽  
pp. 109357
Author(s):  
Jeong Yeon Do ◽  
Namgyu Son ◽  
Jongmin Shin ◽  
Rama Krishna Chava ◽  
Sang Woo Joo ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Phase Change ◽  
Phase Change Material ◽  
Heat Transfer Performance ◽  
Transfer Performance ◽  
Change Material
Sign in / Sign up

Export Citation Format

Share Document