A Combined Spatial and Temporal Decomposition of the Coherent Structures in the Three-Dimensional Wall Jet

2006 ◽  
Author(s):  
Joseph Hall ◽  
Daniel Ewing
Keyword(s):  
Coherent Structures ◽  
Three Dimensional ◽  
Wall Jet ◽  
Temporal Decomposition

Coherent Structures in a Three-Dimensional Wall Jet

1990 ◽  
Vol 112 (4) ◽  
pp. 462-467 ◽  
Author(s):  
Hisashi Matsuda ◽  
Sei-ichi Iida ◽  
Michio Hayakawa
Keyword(s):  
Coherent Structures ◽  
Large Scale ◽  
Near Field ◽  
Three Dimensional ◽  
Sampling Technique ◽  
Wall Jet ◽  
Structure Model ◽  
Streamwise Vortices ◽  
Lateral Velocity ◽  
Circular Nozzle

The formation mechanism of streamwise vortices in the near field of the three-dimensional wall jet discharging from a circular nozzle along a flat plate is studied experimentally using a conditional sampling technique. Ensemble-averages of the lateral velocity component indicate the presence of large-scale horseshoe-like structures, whose legs are inclined and stretched to form the streamwise vortices in the mixing region of the jet. Based on the present result, a coherent structure model for the near field of the wall jet is proposed.

scholarly journals Coherent Streamwise Vortex Structure of a Three-Dimensional Wall Jet

Fluids ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 35
Author(s):  
Lhendup Namgyal ◽  
Joseph W. Hall
Keyword(s):  
Coherent Structures ◽  
Near Field ◽  
Three Dimensional ◽  
Streamwise Vortex ◽  
Relative Strength ◽  
Vortex Structures ◽  
Wall Jet ◽  
Streamwise Vorticity ◽  
Lateral Velocity ◽  
Near Wall

The dynamics of the coherent structures in a turbulent three-dimensional wall jet with an exit Reynolds number of 250,000 were investigated using the Snapshot Proper Orthogonal Decomposition (POD). A low-dimensional reconstruction using the first 10 POD modes indicates that the turbulent flow is dominated by streamwise vortex structures that grow in size and relative strength, and that are often accompanied by strong lateral sweeps of fluid across the wall. This causes an increase in the bulging and distortions of streamwise velocity contours as the flow evolves downstream. The instantaneous streamwise vorticity computed from the reconstructed instantaneous velocities has a high level of vorticity associated with these outer streamwise vortex structures, but often has a persistent pair of counter-rotating regions located close to the wall on either side of the jet centerline. A model of the coherent structures in the wall jet is presented. In this model, streamwise vortex structures are produced in the near-field by the breakdown of vortex rings formed at the jet outlet. Separate structures are associated with the near-wall streamwise vorticity. As the flow evolves downstream, the inner near-wall structures tilt outward, while the outer streamwise structures amalgamate to form larger streamwise asymmetric structures. In all cases, these streamwise vortex structures tend to cause large lateral velocity sweeps in the intermediate and far-field regions of the three-dimensional wall jet. Further, these structures meander laterally across the jet, causing a strongly intermittent jet flow.

Numerical Study of the Mean and Filtered Characteristics of Turbulent Jets Impinging on Convex and Flat Surfaces Using LES

2012 ◽  
Author(s):  
Adra Benhacine ◽  
Zoubir Nemouchi ◽  
Lyes Khezzar ◽  
Nabil Kharoua
Keyword(s):  
Convex Surface ◽  
Numerical Study ◽  
Three Dimensional ◽  
Turbulent Jets ◽  
Scale Model ◽  
Wall Jet ◽  
Potential Core ◽  
Flat Surfaces ◽  
Free Jet ◽  
Eddy Simulation

A numerical study of a turbulent plane jet impinging on a convex surface and on a flat surface is presented, using the large eddy simulation approach and the Smagorinski-Lilly sub-grid-scale model. The effects of the wall curvature on the unsteady filtered, and the steady mean, parameters characterizing the dynamics of the wall jet are addressed in particular. In the free jet upstream of the impingement region, significant and fairly ordered velocity fluctuations, that are not turbulent in nature, are observed inside the potential core. Kelvin-Helmholtz instabilities in the shear layer between the jet and the surrounding air are detected in the form of wavy sheets of vorticity. Rolled up vortices are detached from these sheets in a more or less periodic manner, evolving into distorted three dimensional structures. Along the wall jet the Coanda effect causes a marked suction along the convex surface compared with the flat one. As a result, relatively important tangential velocities and a stretching of sporadic streamwise vortices are observed, leading to friction coefficient values on the curved wall higher than those on the flat wall.

scholarly journals Experimental Study on Coherent Structures by Particles Suspended in Half-Zone Thermocapillary Liquid Bridges: Review

Fluids ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 105
Author(s):  
Ichiro Ueno
Keyword(s):  
Coherent Structures ◽  
Three Dimensional ◽  
Wave Number ◽  
Flow Structures ◽  
Liquid Bridges ◽  
Thermocapillary Effect ◽  
Particle Accumulation ◽  
Azimuthal Wave Number ◽  
Experimental Approaches ◽  
Particle Behaviour

Coherent structures by the particles suspended in the half-zone thermocapillary liquid bridges via experimental approaches are introduced. General knowledge on the particle accumulation structures (PAS) is described, and then the spatial–temporal behaviours of the particles forming the PAS are illustrated with the results of the two- and three-dimensional particle tracking. Variations of the coherent structures as functions of the intensity of the thermocapillary effect and the particle size are introduced by focusing on the PAS of the azimuthal wave number m=3. Correlation between the particle behaviour and the ordered flow structures known as the Kolmogorov–Arnold—Moser tori is discussed. Recent works on the PAS of m=1 are briefly introduced.

Experiments on the stability of sinusoidal flow over a circular cylinder

2002 ◽  
Vol 457 ◽  
pp. 157-180 ◽  
Author(s):  
TURGUT SARPKAYA
Keyword(s):  
Stokes Flow ◽  
Coherent Structures ◽  
High Speed ◽  
Three Dimensional ◽  
Separated Flow ◽  
Circular Cylinders ◽  
Centrifugal Forces ◽  
Complex Interactions ◽  
Sinusoidal Flow ◽  
The Stability

The instabilities in a sinusoidally oscillating non-separated flow over smooth circular cylinders in the range of Keulegan–Carpenter numbers, K, from about 0.02 to 1 and Stokes numbers, β, from about 103 to 1.4 × 106 have been observed from inception to chaos using several high-speed imagers and laser-induced fluorescence. The instabilities ranged from small quasi-coherent structures, as in Stokes flow over a flat wall (Sarpkaya 1993), to three-dimensional spanwise perturbations because of the centrifugal forces induced by the curvature of the boundary layer (Taylor–Görtler instability). These gave rise to streamwise-oriented counter-rotating vortices or mushroom-shaped coherent structures as K approached the Kh values theoretically predicted by Hall (1984). Further increases in K for a given β led first to complex interactions between the coherent structures and then to chaotic motion. The mapping of the observations led to the delineation of four states of flow in the (K, β)-plane: stable, marginal, unstable, and chaotic.

scholarly journals Study on Mechanism of Series-Flow of Pollutants between Consecutive Tunnels by Numerical Simulation

2019 ◽  
Vol 9 (19) ◽  
pp. 4125
Author(s):  
Honghu Zhang ◽  
Yunge Hou ◽  
Kaijie Wu ◽  
Tianhang Zhang ◽  
Ke Wu ◽  
...  
Keyword(s):  
Negative Pressure ◽  
Velocity Ratio ◽  
Three Dimensional ◽  
Wall Jet ◽  
Air Velocity ◽  
Pressure Area ◽  
Computational Fluid Dynamics Cfd ◽  
Jet Theory ◽  
Jet Characteristics ◽  
Tunnel Entrance

The characteristics of series-flow between two consecutive tunnels with distance ranging from 20 m to 250 m are explored by computational fluid dynamics (CFD) parametric simulations of structure and operation parameters. The research indicates that series-flow can be considered the three-dimensional wall jet diffusion of upstream tunnel pollutants under the effects of the negative pressure area of the downstream tunnel entrance. The jet characteristics are primarily related to the tunnel distance between upstream and downstream tunnels and hydraulic diameters, and only influenced by the negative pressure in the area very close to downstream entrance where the tunnel air velocity ratio, i.e., the velocity of upstream tunnel air divided by the velocity of downstream tunnel air, decides the degree of the influence. If ignoring the effects of ambient wind and traffic flow, the series-flow ratio decreases with the increasing of parameters of the normalized tunnel distance, i.e., the tunnel distance divided by tunnel hydraulic diameter, and the tunnel air velocity ratio. Based on the three-dimensional wall jet theory, a series-flow model covering all jet characteristic sections is built. The experiment results indicate that the model applies to consecutive tunnels with any spacing and exhibits higher prediction accuracy.

Sign in / Sign up

Export Citation Format

Share Document