Prediction of Tip-Vortex Flow Past a Finite Wing

2005 ◽  
Author(s):  
Sung-Eun Kim ◽  
Shin Rhee
Keyword(s):  
Vortex Flow ◽  
Tip Vortex ◽  
Flow Past ◽  
Finite Wing

Interactions of a streamwise-oriented vortex with a finite wing

2015 ◽  
Vol 767 ◽  
pp. 782-810 ◽  
Author(s):  
D. J. Garmann ◽  
M. R. Visbal
Keyword(s):  
Separation Bubble ◽  
Angle Of Attack ◽  
Three Dimensional ◽  
Leading Edge ◽  
Tip Vortex ◽  
Recirculation Region ◽  
Rolling Moment ◽  
Effective Angle ◽  
Finite Wing ◽  
Modes Of Interaction

AbstractA canonical study is developed to investigate the unsteady interactions of a streamwise-oriented vortex impinging upon a finite surface using high-fidelity simulation. As a model problem, an analytically defined vortex superimposed on a free stream is convected towards an aspect-ratio-six ($\mathit{AR}=6$) plate oriented at an angle of ${\it\alpha}=4^{\circ }$ and Reynolds number of $\mathit{Re}=20\,000$ in order to characterize the unsteady modes of interaction resulting from different spanwise positions of the incoming vortex. Outboard, tip-aligned and inboard positioning are shown to produce three distinct flow regimes: when the vortex is positioned outboard of, but in close proximity to, the wingtip, it pairs with the tip vortex to form a dipole that propels itself away from the plate through mutual induction, and also leads to an enhancement of the tip vortex. When the incoming vortex is aligned with the wingtip, the tip vortex is initially strengthened by the proximity of the incident vortex, but both structures attenuate into the wake as instabilities arise in the pair’s feeding sheets from the entrainment of opposite-signed vorticity into either structure. Finally, when the incident vortex is positioned inboard of the wingtip, the vortex bifurcates in the time-mean sense with portions convecting above and below the wing, and the tip vortex is mostly suppressed. The time-mean bifurcation is actually a result of an unsteady spiralling instability in the vortex core that reorients the vortex as it impacts the leading edge, pinches off, and alternately attaches to either side of the wing. The increased effective angle of attack inboard of impingement enhances the three-dimensional recirculation region created by the separated boundary layer off the leading edge which draws fluid from the incident vortex inboard and diminishes its impact on the outboard section of the wing. The slight but remaining downwash present outboard of impingement reduces the effective angle of attack in that region, resulting in a small separation bubble on either side of the wing in the time-mean solution, effectively unloading the tip outboard of impingement and suppressing the tip vortex. All incident vortex positions provide substantial increases in the wing’s lift-to-drag ratio; however, significant sustained rolling moments also result. As the vortex is brought inboard, the rolling moment diminishes and eventually switches sign as the reduced outboard loading balances the augmented sectional lift inboard of impingement.

scholarly journals Numerical Investigation of Tip-Vortex Cavitation Noise of an Elliptic Wing Using Coupled Eulerian-Lagrangian Approaches

2020 ◽  
Vol 10 (17) ◽  
pp. 5897 ◽  
Author(s):  
Garam Ku ◽  
Cheolung Cheong ◽  
Hanshin Seol
Keyword(s):  
Flow Field ◽  
Numerical Method ◽  
Vortex Flow ◽  
Acoustic Pressure ◽  
Tip Vortex ◽  
Experimental Result ◽  
Cavitation Noise ◽  
Navier Stokes Equation ◽  
Tip Vortex Cavitation ◽  
Cavitation Inception

In this study, a numerical methodology is developed to investigate the tip-vortex cavitation of NACA16-020 wings and their flow noise. The numerical method consists of a sequential one-way coupled application of Eulerian and Lagrangian approaches. First, the Eulerian method based on Reynolds-averaged Navier–Stokes equation is applied to predict the single-phase flow field around the wing, with particular emphasis on capturing high-resolution tip-vortex flow structures. Subsequently, the tip-vortex flow field is regenerated by applying the Scully vortex model. Secondly, the Lagrangian approach is applied to predict the tip-vortex cavitation inception and noise of the wing. The initial nuclei are distributed upstream of the wing. The subsequent time-varying size and position of each nucleus are traced by solving spherically symmetric bubble dynamics equations for the nuclei in combination with the flow field predicted from the Eulerian approach. The acoustic pressure at the observer position is computed by modelling each bubble as a point source. The numerical results of the acoustic pressure spectrum are best matched to the measured results when the nuclei number density of freshwater is used. Finally, the current numerical method is applied to the flows of various cavitation numbers. The results reveal that the cavitation inception determined by the predicted acoustic pressure spectrum well matched the experimental result.

Transient growth in the near wake region of the flow past a finite span wing

2019 ◽  
Vol 866 ◽  
pp. 399-430 ◽  
Author(s):  
Navrose ◽  
V. Brion ◽  
L. Jacquin
Keyword(s):  
Periodic Structures ◽  
Time Integration ◽  
Tip Vortex ◽  
Wake Region ◽  
Wind Tunnel Experiments ◽  
Near Wake ◽  
Optimal Perturbation ◽  
Tip Vortices ◽  
Naca0012 Airfoil ◽  
Flow Past

We investigate optimal perturbation in the flow past a finite aspect ratio ($AR$) wing. The optimization is carried out in the regime where the fully developed flow is steady. Parametric study over time horizon ($T$), Reynolds number ($Re$), $AR$, angle of attack and geometry of the wing cross-section (flat plate and NACA0012 airfoil) shows that the general shape of linear optimal perturbation remains the same over the explored parameter space. Optimal perturbation is located near the surface of the wing in the form of chord-wise periodic structures whose strength decreases from the root towards the tip. Direct time integration of the disturbance equations, with and without nonlinear terms, is carried out with linear optimal perturbation as initial condition. In both cases, the optimal perturbation evolves as a downstream travelling wavepacket whose speed is nearly the same as that of the free stream. The energy of the wavepacket increases in the near wake region, and is found to remain nearly constant beyond the vortex roll-up distance in nonlinear simulations. The nonlinear wavepacket results in displacement of the tip vortex. In this situation, the motion of the tip vortex resembles that observed during vortex meandering/wandering in wind tunnel experiments. Results from computation carried out at higher $Re$ suggest that, even beyond the steady flow regime, a perturbation wavepacket originating near the wing might cause meandering of tip vortices.

Numerical Experiments for Flow Around a Ducted Tip Hydrofoil

2002 ◽  
Author(s):  
Hildur Ingvarsdo´ttir ◽  
Carl Ollivier-Gooch ◽  
Sheldon I. Green
Keyword(s):  
Turbulence Model ◽  
Vortex Core ◽  
Vortex Flow ◽  
Computational Study ◽  
Near Field ◽  
Vortex Formation ◽  
Tip Vortex ◽  
Navier Stokes ◽  
Computational Studies ◽  
Tip Vortices

The performance and cavitation characteristics of marine propellers and hydrofoils are strongly affected by tip vortex behavior. A number of previous computational studies have been done on tip vortices, both in aerodynamic and marine applications. The focus, however, has primarily been on validating methods for prediction and advancing the understanding of tip-vortex formation in general, rather than showing effects of tip modifications on tip vortices. Studies of the most relevance to the current work include computational studies by Dacles-Mariani et al. (1995) and Hsiao and Pauley (1998, 1999). Daeles-Mariani et al. carried out interactively a computational and experimental study of the wingtip vortex in the near field using a full Navier-Stokes simulation, accompanied with the Baldwin-Barth turbulence model. Although they showed improvement over numerical results obtained by previous researchers, the tip vortex strength was underpredicted. Hsiao and Pauley (1998) studied the steady-state tip vortex flow over a finite-span hydrofoil, also using the Baldwin-Barth turbulence model. They were able to achieve good agreement in pressure distribution and oil flow pattern with experimental data and accurately predict vertical and axial velocities of the tip vortex core within the near-field region. Far downstream, however, the computed flow field was overly diffused within the tip vortex core. Hsiao and Pauley (1999) also carried out a computational study of the tip vortex flow generated by a marine propeller. The general characteristics of the flow were well predicted but the vortex core was again overly diffused.

Tip and Junction Vortices Generated by the Sail of a Yawed Submarine Model at Low Reynolds Numbers

2011 ◽  
Vol 133 (3) ◽  
Author(s):  
Juan M. Jiménez ◽  
Alexander J. Smits
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Water Channel ◽  
Reynolds Numbers ◽  
Tip Vortex ◽  
Streamwise Vortices ◽  
Low Reynolds Numbers ◽  
Good Accordance ◽  
Finite Wing ◽  
Yaw Angle

Results are presented on the behavior of the tip and junction vortices generated by the sail of a SUBOFF submarine model at yaw angles from 6 deg to 17 deg for a Reynolds number of 94×103 based on model length. The measurements were conducted in a water channel on a spanwise plane 1.3 chord lengths downstream from the trailing edge of the sail. In the vicinity of the sail hull junction, the presence of streamwise vortices in the form of horseshoe or necklace vortices locally dominates the flow. As the yaw angle is increased from 6 deg to 9 deg, the circulation of the sail tip vortex increases, and is in good accordance with predictions from finite wing theory. However, as the yaw angle is further increased, the sail boundary layer separates with an overall drop in circulation. In contrast, the circulation value for the junction vortex increases with yaw angle, and only drops slightly at the highest yaw angle.

Passive Wingtip Vortex Control by Using Tip-Mounted Half Delta Wings in Ground Effect

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Anan Lu ◽  
Tim Lee
Keyword(s):  
Vortex Flow ◽  
Ground Effect ◽  
Tip Vortex ◽  
Secondary Vortex ◽  
Flow Properties ◽  
Delta Wings ◽  
Vortex Control ◽  
Physical Mechanisms ◽  
Induced Drag ◽  
Wingtip Vortex

Abstract The ground effect on the wingtip vortex generated by a rectangular semiwing equipped with tip-mounted regular and reverse half delta wings was investigated experimentally. The passive tip vortex control always led to a reduced lift-induced drag as the ground was approached. In close ground proximity, the presence of the corotating ground vortex (GV) added vorticity to the tip vortex while the counter-rotating secondary vortex (SV) negated its vorticity level. The interaction of the GV and SV with the tip vortex and their impact on the lift-induced drag were discussed. Physical mechanisms responsible for the change in the vortex flow properties in ground effect were also provided.

scholarly journals Numerical Study on Dynamic-Stall Characteristics of Finite Wing and Rotor

2019 ◽  
Vol 9 (3) ◽  
pp. 600 ◽  
Author(s):  
Qing Wang ◽  
Qijun Zhao
Keyword(s):  
Numerical Study ◽  
Three Dimensional ◽  
Tip Vortex ◽  
Dynamic Stall ◽  
Navier Stokes ◽  
Governing Equations ◽  
Third Order ◽  
Finite Wing ◽  
Wing Tip ◽  
Spanwise Flow

To study the three-dimensional effects on the dynamic-stall characteristics of a rotor blade, the unsteady flowfields of the finite wing and rotor were simulated under dynamic-stall conditions, respectively. Unsteady Reynolds-averaged Navier–Stokes (URANS) equations coupled with a third-order Roe–MUSCL spatial discretization scheme were chosen as the governing equations to predict the three-dimensional flowfields. It is indicated from the simulated results of a finite wing that dynamic stall would be restricted near the wing tip due to the influence of the wing-tip vortex. By comparing the simulated results of the finite wing with the spanwise flow, it is indicated that the spanwise flow would arouse vortex accumulation. Consequently, the dynamic stall is restricted near the wing root and aggravated near the wing tip. By comparing the simulated results of a rotor in forward flight, it is indicated that the dynamic stall of the rotor would be inhibited due to the effects of the spanwise flow and Coriolis force. This work fills the gap regarding the insufficient three-dimensional dynamic stall of a helicopter rotor, and could be used to guide rotor airfoil shape design in the future.

Prediction of Propeller Tip Vortex Using OpenFOAM

2017 ◽  
Author(s):  
Md Ashim Ali ◽  
Heather Peng ◽  
Wei Qiu ◽  
Rickard Bensow
Keyword(s):  
Vortex Core ◽  
Eddy Viscosity ◽  
Vortex Flow ◽  
Unstructured Grid ◽  
Turbulence Models ◽  
Tip Vortex ◽  
Navier Stokes ◽  
Taylor Model ◽  
Navier Stokes Equation ◽  
Thrust And Torque

It is important to predict the propeller tip vortex flow and its effect on hull vibration and noise. In our previous work, the tip vortex flow of the David Taylor Model Basin (DTMB) 5168 propeller model has been studied based on the Reynolds Averaged Navier-Stokes equation (RANS) solution using various eddy viscosity and Reynolds Stress turbulence models. A set of structural grids were used, however, large Jacobian values of the structural grids around the propeller tip region led to the convergence problem and inaccurate solutions. In the present work, the numerical prediction of the same propeller model was improved by using a steady-state RANS solver simpleFoam in OpenFOAM with locally refined unstructured grid along the tip vortex trajectory. The computed thrust and torque coefficients and the velocity components across the vortex core are compared with experimental data and results in the previous studies. Improvement in the prediction of velocity components across the tip vortex core were achieved.

Sign in / Sign up

Export Citation Format

Share Document