Simulation of Separated Flow Inside a Low-pressure Turbine Cascade

2005 ◽  
Author(s):  
Navtej Singh ◽  
Karman Ghia ◽  
Urmila Ghia
Keyword(s):  
Separated Flow ◽  
Low Pressure ◽  
Turbine Cascade ◽  
Low Pressure Turbine

scholarly journals Prediction of Transient Pressure Fluctuations within a Low-Pressure Turbine Cascade Using a Lanczos-Filtered Harmonic Balance Method

2021 ◽  
Vol 6 (3) ◽  
pp. 25
Author(s):  
Jan Philipp Heners ◽  
Stephan Stotz ◽  
Annette Krosse ◽  
Detlef Korte ◽  
Maximilian Beck ◽  
...  
Keyword(s):  
Turbulence Model ◽  
Harmonic Balance ◽  
Separation Bubble ◽  
Pressure Fluctuations ◽  
Harmonic Balance Method ◽  
Low Pressure ◽  
Filter Method ◽  
Turbine Cascade ◽  
Transient Pressure ◽  
Low Pressure Turbine

Unsteady pressure fluctuations measured by fast-response pressure transducers mounted in a low-pressure turbine cascade are compared to unsteady simulation results. Three differing simulation approaches are considered, one time-integration method and two harmonic balance methods either resolving or averaging the time-dependent components within the turbulence model. The observations are used to evaluate the capability of the harmonic balance solver to predict the transient pressure fluctuations acting on the investigated stator surface. Wakes of an upstream rotor are generated by moving cylindrical bars at a prescribed rotational speed that refers to a frequency of f∼500 Hz. The excitation at the rear part of the suction side is essentially driven by the presence of a separation bubble and is therefore highly dependent on the unsteady behavior of turbulence. In order to increase the stability of the investigated harmonic balance solver, a developed Lanczos-type filter method is applied if the turbulence model is considered in an unsteady fashion.

Redesign of High-Lift LP-Turbine Airfoils for Low Speed Testing

2010 ◽  
Author(s):  
Michele Marconcini ◽  
Filippo Rubechini ◽  
Roberto Pacciani ◽  
Andrea Arnone ◽  
Francesco Bertini
Keyword(s):  
Separated Flow ◽  
Low Pressure ◽  
High Lift ◽  
Low Speed ◽  
Low Pressure Turbine ◽  
Wide Range ◽  
Flow Configurations ◽  
Artificial Neural Network Ann ◽  
Lp Turbine ◽  
Turbine Airfoils

Low pressure turbine airfoils of the present generation usually operate at subsonic conditions, with exit Mach numbers of about 0.6. To reduce the costs of experimental programs it can be convenient to carry out measurements in low speed tunnels in order to determine the cascades performance. Generally speaking, low speed tests are usually carried out on airfoils with modified shape, in order to compensate for the effects of compressibility. A scaling procedure for high-lift, low pressure turbine airfoils to be studied in low speed conditions is presented and discussed. The proposed procedure is based on the matching of a prescribed blade load distribution between the low speed airfoil and the actual one. Such a requirement is fulfilled via an Artificial Neural Network (ANN) methodology and a detailed parameterization of the airfoil. A RANS solver is used to guide the redesign process. The comparison between high and low speed profiles is carried out, over a wide range of Reynolds numbers, by using a novel three-equation, transition-sensitive, turbulence model. Such a model is based on the coupling of an additional transport equation for the so-called laminar kinetic energy (LKE) with the Wilcox k–ω model and it has proven to be effective for transitional, separated-flow configurations of high-lift cascade flows.

Numerical Investigation of Loss Development in a Low-Pressure Turbine Cascade With Unsteady Inflow and Varying Inlet Endwall Boundary Layer

2021 ◽  
Author(s):  
Tobias Schubert ◽  
Reinhard Niehuis
Keyword(s):  
Boundary Layer ◽  
Low Pressure ◽  
Turbine Cascade ◽  
Time Resolved ◽  
Blade Passage ◽  
Low Pressure Turbine ◽  
Wake Interaction ◽  
Spatial Redistribution ◽  
Unsteady Inflow ◽  
Flow Attenuation

Abstract An investigation of endwall loss development is conducted using the T106A low-pressure turbine cascade. (U)RANS simulations are complemented by measurements under engine relevant flow conditions (M2th = 0.59, Re2th = 2·105). The effects of unsteady inflow conditions and varying inlet endwall boundary layer are compared in terms of secondary flow attenuation downstream of the blade passage, analyzing steady, time-averaged, and time-resolved flow fields. While both measures show similar effects in the turbine exit plane, the upstream loss development throughout the blade passage is quite different. A variation of the endwall boundary layer alters the slope of the axial loss generation beginning around the midpoint of the blade passage. Periodically incoming wakes, however, cause a spatial redistribution of the loss generation with a premature loss increase due to wake interaction in the front part of the passage followed by an attenuation of the profile- and secondary loss generation in the aft section of the blade passage. Ultimately, this leads to a convergence of the downstream loss values in the steady and unsteady inflow cases.

Transition Mechanisms in Laminar Separated Flow Under Simulated Low Pressure Turbine Aerofoil Conditions

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
Jerrit Dähnert ◽  
Christoph Lyko ◽  
Dieter Peitsch
Keyword(s):  
Reynolds Number ◽  
Separation Bubble ◽  
Separated Flow ◽  
Low Pressure ◽  
Main Flow ◽  
Test Facility ◽  
Flow Conditions ◽  
Laminar Separation ◽  
Free Stream Turbulence ◽  
Low Pressure Turbine

Based on detailed experimental work conducted at a low speed test facility, this paper describes the transition process in the presence of a separation bubble with low Reynolds number, low free-stream turbulence, and steady main flow conditions. A pressure distribution has been created on a long flat plate by means of a contoured wall opposite of the plate, matching the suction side of a modern low-pressure turbine aerofoil. The main flow conditions for four Reynolds numbers, based on suction surface length and nominal exit velocity, were varied from 80,000 to 300,000, which covers the typical range of flight conditions. Velocity profiles and the overall flow field were acquired in the boundary layer at several streamwise locations using hot-wire anemometry. The data given is in the form of contours for velocity, turbulence intensity, and turbulent intermittency. The results highlight the effects of Reynolds number, the mechanisms of separation, transition, and reattachment, which feature laminar separation-long bubble and laminar separation-short bubble modes. For each Reynolds number, the onset of transition, the transition length, and the general characteristics of separated flow are determined. These findings are compared to the measurement results found in the literature. Furthermore, the experimental data is compared with two categories of correlation functions also given in the literature: (1) correlations predicting the onset of transition and (2) correlations predicting the mode of separated flow transition. Moreover, it is shown that the type of instability involved corresponds to the inviscid Kelvin-Helmholtz instability mode at a dominant frequency that is in agreement with the typical ranges occurring in published studies of separated and free-shear layers.

scholarly journals Numerical Investigation of Wake Interaction in a Low Pressure Turbine

1998 ◽  
Author(s):  
Frank Eulitz ◽  
Karl Engel
Keyword(s):  
Phenomenological Study ◽  
Separated Flow ◽  
Low Pressure ◽  
Skin Friction Coefficient ◽  
Boundary Layer Transition ◽  
Navier Stokes ◽  
Layer Transition ◽  
Low Pressure Turbine ◽  
Wake Interaction ◽  
Large Fluctuations

A time-accurate Reynolds-averaged Navier-Stokes solver has been extended for a phenomenological study of wake/bladerow interaction in a low pressure turbine near midspan. To qualitatively account for unsteady laminar-turbulent boundary layer transition, a variant of the Abu-Ghanam Shaw transition correlation has been coupled with the Spalart-Allmaras one-equation turbulence model. The method is shown to be capable of capturing separated-flow and wake-induced transition, as well as becalming and relaminarization effects. The model turbine investigated consists of three stator and two rotor rows. Instantaneous Mach number and eddy-viscosity plots are presented to monitor the wake migration and interaction with downstream boundary layers. Especially on the suction sides, very large fluctuations of the skin friction coefficient are observed. Effects of the near and far wakes are identified.

The Effects of Inlet Boundary Layer Condition and Periodically Incoming Wakes on Secondary Flow in a Low Pressure Turbine Cascade

2020 ◽  
Author(s):  
Tobias Schubert ◽  
Silvio Chemnitz ◽  
Reinhard Niehuis
Keyword(s):  
Boundary Layer ◽  
Secondary Flow ◽  
High Speed ◽  
Low Pressure ◽  
Experimental Investigations ◽  
Turbine Cascade ◽  
Flow Conditions ◽  
Low Pressure Turbine ◽  
Speed Flow ◽  
Unsteady Inflow

Abstract A particular turbine cascade design is presented with the goal of providing a basis for high quality investigations of endwall flow at high-speed flow conditions and unsteady inflow. The key feature of the design is an integrated two-part flat plate serving as a cascade endwall at part-span, which enables a variation of the inlet endwall boundary layer conditions. The new design is applied to the T106A low pressure turbine cascade for endwall flow investigations in the High-Speed Cascade Wind Tunnel of the Institute of Jet Propulsion at the Bundeswehr University Munich. Measurements are conducted at realistic flow conditions (M2th = 0.59, Re2th = 2·105) in three cases of different endwall boundary layer conditions with and without periodically incoming wakes. The endwall boundary layer is characterized by 1D-CTA measurements upstream of the blade passage. Secondary flow is evaluated by Five-hole-probe measurements in the turbine exit flow. A strong similarity is found between the time-averaged effects of unsteady inflow conditions and the effects of changing inlet endwall boundary layer conditions regarding the attenuation of secondary flow. Furthermore, the experimental investigations show, that all design goals for the improved T106A cascade are met.

Sign in / Sign up

Export Citation Format

Share Document