Numerical Study of a Single Hydrogen/Air Gas Turbine Fuel Nozzle

2003 ◽  
Author(s):  
Tsan-Hsing Shih ◽  
Timothy Smith ◽  
Cecil Marek ◽  
Anthony Iannetti ◽  
Andrew Norris ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Numerical Study ◽  
Fuel Nozzle

scholarly journals CFD Analysis of Liquid Spray Combustion in a Gas Turbine Combustor

1997 ◽  
Author(s):  
Mark K. Lai
Keyword(s):  
Gas Turbine ◽  
Gas Phase ◽  
Numerical Study ◽  
Operating Conditions ◽  
Temperature Fields ◽  
Numerical Code ◽  
Gas Turbine Combustor ◽  
Conservation Equations ◽  
Liquid Spray ◽  
Fuel Nozzle

A numerical method is presented for predicting steady, three-dimensional, turbulent, liquid spray combusting flows in a gas turbine combustor. The Eulerian conservation equations for gas flow and the Lagrangian conservation equations for discrete fuel liquid droplets were solved. The trajectory computation of the fuel droplets provided the source terms for all the gas-phase equations. A standard k-ε submodel was used for turbulence. The combustion submodel used was a global local equilibrium model, where chemical species (CxHy, O2, CO2, H2O, CO, H2 and N2) approached local thermodynamic equilibrium with a rate determined by a combination of local turbulent mixing and global chemical kinetics times. The numerical methodology for gas-phase calculations involved a staggered finite-volume formulation with a multi-block curvilinear orthogonal coordinate computational grid, and the PISO algorithm. This numerical code was applied to a model gas turbine combustor similar to that of the Allison 570KF currently in use by the Canadian Navy. The combustor was equipped with an advanced airblast fuel nozzle. The calculations included the analysis of the internal passages of the fuel nozzle. Through the numerical study at full-power and low-cruise operating conditions, a better understanding of the physical processes of flow and temperature fields inside the primary zone was obtained. Predicted hot spots corresponded to locations where deterioration of the combustor liner has been observed in practice.

A Numerical Study on the Reactivity of Biogas/Reformed-Gas/Air and Methane/Reformed-Gas/Air Mixtures at Gas Turbine Relevant Conditions

2016 ◽  
Author(s):  
Pablo Diaz Gomez Maqueo ◽  
Philippe Versailles ◽  
Gilles Bourque ◽  
Jeffrey M. Bergthorson
Keyword(s):  
Gas Turbine ◽  
Laminar Flame ◽  
Numerical Study ◽  
Flame Temperature ◽  
Flame Speed ◽  
Flame Stability ◽  
Laminar Flame Speed ◽  
Fuel Reforming ◽  
Numerical Work ◽  
Chemical Effects

This study investigates the increase in methane and biogas flame reactivity enabled by the addition of syngas produced through fuel reforming. To isolate thermodynamic and chemical effects on the reactivity of the mixture, the burner simulations are performed with a constant adiabatic flame temperature of 1800 K. Compositions and temperatures are calculated with the chemical equilibrium solver of CANTERA® and the reactivity of the mixture is quantified using the adiabatic, freely-propagating premixed flame, and perfectly-stirred reactors of the CHEMKIN-Pro® software package. The results show that the produced syngas has a content of up to 30 % H2 with a temperature up to 950 K. When added to the fuel, it increases the laminar flame speed while maintaining a burning temperature of 1800 K. Even when cooled to 300 K, the laminar flame speed increases up to 30 % from the baseline of pure biogas. Hence, a system can be developed that controls and improves biogas flame stability under low reactivity conditions by varying the fraction of added syngas to the mixture. This motivates future experimental work on reforming technologies coupled with gas turbine exhausts to validate this numerical work.

Numerical Simulation of Gas Flow and Heat Transfer in Cross-Wavy Primary Surface Channel for Microtubine Recuperators

2005 ◽  
Author(s):  
H. X. Liang ◽  
Q. W. Wang ◽  
L. Q. Luo ◽  
Z. P. Feng
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Gas Turbine ◽  
Numerical Study ◽  
High Reliability ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Flow And Heat Transfer ◽  
High Heat Transfer ◽  
The Cross

Three-dimensional numerical simulation was conducted to investigate the flow field and heat transfer performance of the Cross-Wavy Primary Surface (CWPS) recuperators for microturbines. Using high-effective compact recuperators to achieve high thermal efficiency is one of the key techniques in the development of microturbine in recent years. Recuperators need to have minimum volume and weight, high reliability and durability. Most important of all, they need to have high thermal-effectiveness and low pressure-losses so that the gas turbine system can achieve high thermal performances. These requirements have attracted some research efforts in designing and implementing low-cost and compact recuperators for gas turbine engines recently. One of the promising techniques to achieve this goal is the so-called primary surface channels with small hydraulic dimensions. In this paper, we conducted a three-dimensional numerical study of flow and heat transfer for the Cross-Wavy Primary Surface (CWPS) channels with two different geometries. In the CWPS configurations the secondary flow is created by means of curved and interrupted surfaces, which may disturb the thermal boundary layers and thus improve the thermal performances of the channels. To facilitate comparison, we chose the identical hydraulic diameters for the above four CWPS channels. Since our experiments on real recuperators showed that the Reynolds number ranges from 150 to 500 under the operating conditions, we implemented all the simulations under laminar flow situations. By analyzing the correlations of Nusselt numbers and friction factors vs. Reynolds numbers of the four CWPS channels, we found that the CWPS channels have superior and comprehensive thermal performance with high compactness, i.e., high heat transfer area to volume ratio, indicating excellent commercialized application in the compact recuperators.

Development of a gas turbine fuel nozzle for DME and a design method thereof

Fuel ◽  
2012 ◽  
Vol 102 ◽  
pp. 823-830 ◽  
Author(s):  
Min Chul Lee ◽  
Youngbin Yoon
Keyword(s):  
Gas Turbine ◽  
Design Method ◽  
Fuel Nozzle

Numerical Study on Flow and Heat Transfer of a Cooled First Stage Vane of a Gas Turbine

2016 ◽  
Author(s):  
Lv Ye ◽  
Zhao Liu ◽  
Xiangyu Wang ◽  
Zhenping Feng
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Film Cooling ◽  
Numerical Study ◽  
Coolant Flow ◽  
The Other ◽  
Edge Region ◽  
Flow Rates ◽  
Flow And Heat Transfer ◽  
Film Cooling Holes

This paper presents a numerical simulation of composite cooling on a first stage vane of a gas turbine, in which gas by fixed composition mixture is adopted. To investigate the flow and heat transfer characteristics, two internal chambers which contain multiple arrays of impingement holes are arranged in the vane, several arrays of pin-fins are arranged in the trailing edge region, and a few arrays of film cooling holes are arranged on the vane surfaces to form the cooling film. The coolant enters through the shroud inlet, and then divided into two parts. One part is transferred into the chamber in the leading edge region, and then after impinging on the target surfaces, it proceeds further to go through the film cooling holes distributed on the vane surface, while the other part enters into the second chamber immediately and then exits to the mainstream in two ways to effectively cool the other sections of the vane. In this study, five different coolant flow rates and six different inlet pressure ratios were investigated. All the cases were performed with the same domain grids and same boundary conditions. It can be concluded that for the internal surfaces, the heat transfer coefficient changes gradually with the coolant flow rate and the inlet total pressure ratio, while for the external surfaces, the average cooling effectiveness increases with the increase of coolant mass flow rates while decreases with the increase of the inlet stagnation pressure ratios within the study range.

Experimental and numerical study of flame structure and emissions in a micro gas turbine combustor

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Vedant Dwivedi ◽  
Srikanth Hari ◽  
S. M. Kumaran ◽  
B. V. S. S. S. Prasad ◽  
Vasudevan Raghavan
Keyword(s):  
Gas Turbine ◽  
Rural Areas ◽  
Gas Turbines ◽  
Alternative Fuels ◽  
Numerical Study ◽  
Operating Conditions ◽  
Emission Characteristics ◽  
Nitric Oxides ◽  
Gas Turbine Combustor ◽  
Micro Gas Turbine

Abstract Experimental and numerical study of flame and emission characteristics in a tubular micro gas turbine combustor is reported. Micro gas turbines are used for distributed power (DP) generation using alternative fuels in rural areas. The combustion and emission characteristics from the combustor have to be studied for proper design using different fuel types. In this study methane, representing fossil natural gas, and biogas, a renewable fuel that is a mixture of methane and carbon-dioxide, are used. Primary air flow (with swirl component) and secondary aeration have been varied. Experiments have been conducted to measure the exit temperatures. Turbulent reactive flow model is used to simulate the methane and biogas flames. Numerical results are validated against the experimental data. Parametric studies to reveal the effects of primary flow, secondary flow and swirl have been conducted and results are systematically presented. An analysis of nitric-oxides emission for different fuels and operating conditions has been presented subsequently.

Sign in / Sign up

Export Citation Format

Share Document