Three-dimensional numerical study of a scramjet combustor

2002 ◽  
Author(s):  
T. Abdel-Salam ◽  
S. Tiwari ◽  
T. Mohieldin
Keyword(s):  
Numerical Study ◽  
Three Dimensional ◽  
Scramjet Combustor

scholarly journals Numerical Study on the Solid Fuel Rocket Scramjet Combustor with Cavity

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1235 ◽  
Author(s):  
Chaolong Li ◽  
Zhixun Xia ◽  
Likun Ma ◽  
Xiang Zhao ◽  
Binbin Chen
Keyword(s):  
Solid Fuel ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Combustion Efficiency ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Particle Combustion ◽  
Scramjet Combustor ◽  
Cavity Configuration

Scramjet based on solid propellant is a good supplement for the power device of future hypersonic vehicles. A new scramjet combustor configuration using solid fuel, namely, the solid fuel rocket scramjet (SFRSCRJ) combustor is proposed. The numerical study was conducted to simulate a flight environment of Mach 6 at a 25 km altitude. Three-dimensional Reynolds-averaged Navier–Stokes equations coupled with shear stress transport (SST) k − ω turbulence model are used to analyze the effects of the cavity and its position on the combustor. The feasibility of the SFRSCRJ combustor with cavity is demonstrated based on the validation of the numerical method. Results show that the scramjet combustor configuration with a backward-facing step can resist high pressure generated by the combustion in the supersonic combustor. The total combustion efficiency of the SFRSCRJ combustor mainly depends on the combustion of particles in the fuel-rich gas. A proper combustion organization can promote particle combustion and improve the total combustion efficiency. Among the four configurations considered, the combustion efficiency of the mid-cavity configuration is the highest, up to about 70%. Therefore, the cavity can effectively increase the combustion efficiency of the SFRSCRJ combustor.

Numerical Simulation of Dual-Mode Scramjet Combustor with Significant Upstream Interaction

2012 ◽  
Vol 2 (3) ◽  
pp. 60-74
Author(s):  
Rahul Ingle ◽  
Debasis Chakraborty
Keyword(s):  
Surface Pressure ◽  
Stokes Equations ◽  
Numerical Study ◽  
Three Dimensional ◽  
Interaction Model ◽  
Navier Stokes ◽  
Dual Mode ◽  
Fast Kinetics ◽  
Scramjet Combustor ◽  
Flow Features

This paper is concerned with a numerical study corresponding to experimental investigation of Chinzei and co-workers on hydrogen fueled dual-mode scramjet engine essentially to understand the key features of upstream interaction, mixing and combustion. Three dimensional Navier Stokes equations along with a K-? turbulence model and infinitely fast kinetics are solved using commercial CFD software. Reasonable agreement has been obtained between the computed surface pressure with experimental values and the results of other numerical simulations. Insights into the flow features inside the combustor are obtained through analysis of various thermochemical parameters. The comparison of surface pressure with experimental results and other numerical results demonstrated that simple kinetics and turbulence – chemistry interaction model may be adequate to address the overall flow features in the combustor. A principal conclusion is that the boundary layer at the combustor entry has a pronounced effect on the flow development in the dual-mode scramjet combustor and causes significant upstream interaction.

EXPERIMENTAL AND NUMERICAL STUDY OF THREE-DIMENSIONAL NATURAL CONVECTION AND FREEZING IN WATER

1994 ◽  
Author(s):  
C. Abegg ◽  
Graham de Vahl Davis ◽  
W.J. Hiller ◽  
St. Koch ◽  
Tomasz A. Kowalewski ◽  
...  
Keyword(s):  
Natural Convection ◽  
Numerical Study ◽  
Three Dimensional

Boundary element method in numerical study of three-dimensional Stokes flows in channels of arbitrary shape

2012 ◽  
Vol 9 (1) ◽  
pp. 94-97
Author(s):  
Yu.A. Itkulova
Keyword(s):  
Boundary Element Method ◽  
Boundary Element ◽  
Cross Section ◽  
Numerical Study ◽  
Three Dimensional ◽  
Cylindrical Tube ◽  
Variable Cross Section ◽  
Variable Cross ◽  
Periodic Flows ◽  
Element Method

In the present work creeping three-dimensional flows of a viscous liquid in a cylindrical tube and a channel of variable cross-section are studied. A qualitative triangulation of the surface of a cylindrical tube, a smoothed and experimental channel of a variable cross section is constructed. The problem is solved numerically using boundary element method in several modifications for a periodic and non-periodic flows. The obtained numerical results are compared with the analytical solution for the Poiseuille flow.

scholarly journals A Numerical Study of Sub-Millisecond Integrated Mix-and-Inject Microfluidic Devices for Sample Delivery at Synchrotron and XFELs

2021 ◽  
Vol 11 (8) ◽  
pp. 3404
Author(s):  
Majid Hejazian ◽  
Eugeniu Balaur ◽  
Brian Abbey
Keyword(s):  
Molecular Dynamics ◽  
Flow Rate ◽  
Numerical Study ◽  
Three Dimensional ◽  
Microfluidic Devices ◽  
Liquid Jets ◽  
Mixing Efficiency ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
Time Required

Microfluidic devices which integrate both rapid mixing and liquid jetting for sample delivery are an emerging solution for studying molecular dynamics via X-ray diffraction. Here we use finite element modelling to investigate the efficiency and time-resolution achievable using microfluidic mixers within the parameter range required for producing stable liquid jets. Three-dimensional simulations, validated by experimental data, are used to determine the velocity and concentration distribution within these devices. The results show that by adopting a serpentine geometry, it is possible to induce chaotic mixing, which effectively reduces the time required to achieve a homogeneous mixture for sample delivery. Further, we investigate the effect of flow rate and the mixer microchannel size on the mixing efficiency and minimum time required for complete mixing of the two solutions whilst maintaining a stable jet. In general, we find that the smaller the cross-sectional area of the mixer microchannel, the shorter the time needed to achieve homogeneous mixing for a given flow rate. The results of these simulations will form the basis for optimised designs enabling the study of molecular dynamics occurring on millisecond timescales using integrated mix-and-inject microfluidic devices.

Sign in / Sign up

Export Citation Format

Share Document