Two-dimensional viscous simulation of inlet-isolator flows at Mach number 4

2001 ◽  
Author(s):  
M. Ding ◽  
L. Hua ◽  
F. Xiao
Keyword(s):  
Mach Number ◽  
Two Dimensional

Effect of Compressibility on Gaseous Flows in a Micro-Tube

2003 ◽  
Author(s):  
Yutaka Asako ◽  
Kenji Nakayama
Keyword(s):  
Reynolds Number ◽  
Mach Number ◽  
Pressure Distribution ◽  
Flow Characteristics ◽  
Fused Silica ◽  
Two Dimensional ◽  
Arbitrary Lagrangian Eulerian ◽  
Gaseous Flow ◽  
Gaseous Flows ◽  
Energy Equations

The product of friction factor and Reynolds number (f·Re) of gaseous flow in the quasi-fully developed region of a micro-tube was obtained experimentally and numerically. The tube cutting method was adopted to obtain the pressure distribution along the tube. The fused silica tubes whose nominal diameters were 100 and 150 μm, were used. Two-dimensional compressible momentum and energy equations were solved to obtain the flow characteristics in micro-tubes. The numerical methodology is based on the Arbitrary-Lagrangian-Eulerian (ALE) method. The both results agree well and it was found that (f·Re) is a function of Mach number.

Inverse cascades in two‐dimensional compressible turbulence. I. Incompressible forcing at low Mach number

1990 ◽  
Vol 2 (8) ◽  
pp. 1481-1486 ◽  
Author(s):  
J. P. Dahlburg ◽  
R. B. Dahlburg ◽  
J. H. Gardner ◽  
J. M. Picone
Keyword(s):  
Mach Number ◽  
Compressible Turbulence ◽  
Two Dimensional ◽  
Low Mach Number

scholarly journals Critical Mach Numbers of Flow around Two-Dimensional and Axisymmetric Bodies

Aerodynamics ◽  
2021 ◽  
Author(s):  
Vladimir Frolov
Keyword(s):  
Mach Number ◽  
Cross Section ◽  
Flow Simulation ◽  
The Body ◽  
Two Dimensional ◽  
Critical Mach Number ◽  
Method Of Integral Relations ◽  
Viscosity Factor ◽  
Mach Numbers ◽  
Axisymmetric Bodies

The paper presents the calculated results obtained by the author for critical Mach numbers of the flow around two-dimensional and axisymmetric bodies. Although the previously proposed method was applied by the author for two media, air and water, this chapter is devoted only to air. The main goal of the work is to show the high accuracy of the method. For this purpose, the work presents numerous comparisons with the data of other authors. This method showed acceptable accuracy in comparison with the Dorodnitsyn method of integral relations and other methods. In the method under consideration, the parameters of the compressible flow are calculated from the parameters of the flow of an incompressible fluid up to the Mach number of the incoming flow equal to the critical Mach number. This method does not depend on the means determination parameters of the incompressible flow. The calculation in software Flow Simulation was shown that the viscosity factor does not affect the value critical Mach number. It was found that with an increase in the relative thickness of the body, the value of the critical Mach number decreases. It was also found that the value of the critical Mach number for the two-dimensional case is always less than for the axisymmetric case for bodies with the same cross-section.

Effects of In-plane Load on Flutter of Homogeneous Laminated Beam Plates with Delamination

2000 ◽  
Vol 123 (1) ◽  
pp. 61-66 ◽  
Author(s):  
Le-Chung Shiau ◽  
Yuan-Shih Chen
Keyword(s):  
Mach Number ◽  
Natural Frequencies ◽  
Plate Theory ◽  
Compressive Load ◽  
Two Dimensional ◽  
Plate Model ◽  
Laminated Beam ◽  
Simply Supported ◽  
Flutter Boundary ◽  
Homogeneous Beam

The effects of in-plane load on flutter characteristics of delaminated two-dimensional homogeneous beam plates at high supersonic Mach number are investigated theoretically. Linear plate theory and quasi-steady supersonic aerodynamic theory are employed. A simple beam-plate model is developed to predict the effects of in-plane load on flutter boundaries for the delaminated beam plates with simply supported ends. Results reveal that the presence of an in-plane compressive load degrades the stiffness and natural frequencies of the plate and thereby decreases the flutter boundary for the plate. However, for certain geometry, the flutter boundaries were raised due to flutter coalescence modes of the plate altered by the presence of the in-plane load on the plate.

Incompressible limit for the two-dimensional isentropic Euler system with critical initial data

2014 ◽  
Vol 144 (6) ◽  
pp. 1127-1154 ◽  
Author(s):  
Taoufik Hmidi ◽  
Samira Sulaiman
Keyword(s):  
Mach Number ◽  
Initial Data ◽  
Euler System ◽  
Incompressible Limit ◽  
Two Dimensional ◽  
Low Mach Number ◽  
Low Mach Number Limit ◽  
Critical Besov Space ◽  
Convergence Results ◽  
Incompressible Euler

We study the low-Mach-number limit for the two-dimensional isentropic Euler system with ill-prepared initial data belonging to the critical Besov space . By combining Strichartz estimates with the special structure of the vorticity, we prove that the lifespan of the solutions goes to infinity as the Mach number goes to zero. We also prove strong convergence results of the incompressible parts to the solution of the incompressible Euler system.

Stability of a compressible two-dimensional vortex under a three-dimensional perturbation

1984 ◽  
Vol 392 (1803) ◽  
pp. 279-299 ◽  
Keyword(s):  
Mach Number ◽  
Velocity Profile ◽  
Incompressible Flow ◽  
Compressible Fluid ◽  
Three Dimensional ◽  
Critical Value ◽  
Two Dimensional ◽  
Rankine Vortex ◽  
The Core ◽  
Critical Boundary

Kelvin showed that a two-dimensional vortex under a two-dimensional disturbance in incompressible flow responds at a discrete set of eigenvalues, which were found by Broadbent & Moore ( Phil. Trans. R. Soc. Lond. A 290, 353-371 (1979) to become unstable in a compressible fluid. It is now shown that three-dimensional perturbations are also unstable provided the wavelength is greater than some critical value that depends on the Mach number of the vortex. A critical boundary dividing stable from unstable modes is defined. Most of the results relate to a Rankine vortex, as in the previous work mentioned above, but some results are also given for a vortex with a different velocity profile within the core; qualitatively the same kind of behaviour is found.

On the stability of plane shock waves

1957 ◽  
Vol 2 (4) ◽  
pp. 397-411 ◽  
Author(s):  
N. C. Freeman
Keyword(s):  
Shock Wave ◽  
Mach Number ◽  
Shock Waves ◽  
Plane Shock ◽  
Two Dimensional ◽  
Small Perturbations ◽  
Diverging Channel ◽  
Maximum Stability ◽  
The Stability ◽  
Fourier Type

The decay of small perturbations on a plane shock wave propagating along a two-dimensional channel into a fluid at rest is investigated mathematically. The perturbations arise from small departures of the walls from uniform parallel shape or, physically, by placing small obstacles on the otherwise plane parallel walls. An expression for the pressure on a shock wave entering a uniformly, but slowly, diverging channel already exists (given by Chester 1953) as a deduction from the Lighthill (1949) linearized small disturbance theory of flow behind nearly plane shock waves. Using this result, an expression for the pressure distribution produced by the obstacles upon the shock wave is built up as an integral of Fourier type. From this, the shock shape, ξ, is deduced and the decay of the perturbations obtained from an expansion (valid after the disturbances have been reflected many times between the walls) for ξ in descending power of the distance, ζ, travelled by the shock wave. It is shown that the stability properties of the shock wave are qualitatively similar to those discussed in a previous paper (Freeman 1955); the perturbations dying out in an oscillatory manner like ζ−3/2. As before, a Mach number of maximum stability (1·15) exists, the disturbances to the shock wave decaying most rapidly at this Mach number. A modified, but more complicated, expansion for the perturbations, for use when the shock wave Mach number is large, is given in §4.In particular, the results are derived for the case of symmetrical ‘roof top’ obstacles. These predictions are compared with data obtained from experiments with similar obstacles on the walls of a shock tube.

Sign in / Sign up

Export Citation Format

Share Document