Characterizing unsteady periodic disturbances in the tip leakage vortex of an idealized axial compressor rotor blade

2001 ◽  
Author(s):  
Nilanjan Saha ◽  
Ruolong Ma ◽  
William Devenport
Keyword(s):  
Rotor Blade ◽  
Axial Compressor ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Periodic Disturbances

Numerical Investigation of Relation Between Unsteady Behavior of Tip Leakage Vortex and Rotating Disturbance in a Transonic Axial Compressor Rotor

2008 ◽  
Author(s):  
K. Yamada ◽  
K. Funazaki ◽  
H. Sasaki
Keyword(s):  
Vortex Breakdown ◽  
Axial Compressor ◽  
Tip Clearance ◽  
Tip Leakage Vortex ◽  
Tip Clearance Flow ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Clearance Flow ◽  
Transonic Axial Compressor ◽  
Rotating Instability

The purpose of this study is to have a better understanding of the unsteady behavior of tip clearance flow at near-stall condition from a multi-passage simulation and to clarify the relation between such unsteadiness and rotating disturbance. This study is motivated by the following concern. A single passage simulation has revealed the occurrence of the tip leakage vortex breakdown at near-stall condition in a transonic axial compressor rotor, leading to the unsteadiness of the tip clearance flow field in the rotor passage. These unsteady flow phenomena were similar to those in the rotating instability, which is classified in one of the rotating disturbances. In other words it is possible that the tip leakage vortex breakdown produces a rotating disturbance such as the rotating instability. Three-dimensional unsteady RANS calculation was conducted to simulate the rotating disturbance in a transonic axial compressor rotor (NASA Rotor 37). The four-passage simulation was performed so as to capture a short length scale disturbance like the rotating instability and the spike-type stall inception. The simulation demonstrated that the unsteadiness of tip leakage vortex, which was derived from the vortex breakdown at near-stall condition, invoked the rotating disturbance in the rotor, which is similar to the rotating instability.

101 Interaction of Tip Leakage Vortex with Shock Wave in a Transonic Axial Compressor Rotor

2000 ◽  
Vol 2000.53 (0) ◽  
pp. 1-2
Author(s):  
Kazutoyo YAMADA ◽  
Yoshinori TAGUCHI ◽  
Kazuhisa SAIKI ◽  
Masato FURUKAWA ◽  
Masahiro INOUE
Keyword(s):  
Shock Wave ◽  
Axial Compressor ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Transonic Axial Compressor

Effects of Tip Clearance Size on Flowfield in a Low-Speed Axial Compressor Rotor

2014 ◽  
Vol 543-547 ◽  
pp. 158-163 ◽  
Author(s):  
Zhen Zhen Duan ◽  
Yang Wei Liu ◽  
Li Peng Lu
Keyword(s):  
Flow Condition ◽  
Axial Compressor ◽  
Tip Clearance ◽  
Primary Role ◽  
Tip Leakage Vortex ◽  
Low Speed ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Overall Performance ◽  
Corner Vortex

The simulations of a low-speed axial compressor rotor with two tip clearance sizes, 0.5% chord and 1.5% chord, were performed in the study. Overall performance and detailed flow fields at near stall condition are analyzed. The results show that the rotor stall occurs at higher mass flow condition with large tip clearance. For the small tip clearance the tip leakage vortex and the corner vortex both contribute significantly to the rotor stall, and the interaction between the vortices promotes the stall generation. While for the large tip clearance the tip leakage vortex plays a primary role, and the vortices interaction is ignorable.

Unsteady Flow Behavior due to Breakdown of Tip Leakage Vortex in an Axial Compressor Rotor at Near-Stall Condition

2000 ◽  
Author(s):  
Masato Furukawa ◽  
Kazuhisa Saiki ◽  
Kazutoyo Yamada ◽  
Masahiro Inoue
Keyword(s):  
Unsteady Flow ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Surface Boundary ◽  
Pressure Side ◽  
Suction Surface ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Pressure Surface ◽  
Compressor Rotor

The unsteady flow nature caused by the breakdown of the tip leakage vortex in an axial compressor rotor at near-stall conditions has been investigated by unsteady three-dimensional Navier-Stokes flow simulations. The simulations show that the spiral-type breakdown of the tip leakage vortex occurs inside the rotor passage at the near-stall conditions. Downstream of the breakdown onset, the tip leakage vortex twists and turns violently with time, thus interacting with the pressure surface of the adjacent blade. The motion of the vortex and its interaction with the pressure surface are cyclic. The vortex breakdown causes significant changes in the nature of the tip leakage vortex, which result in the anomalous phenomena in the time-averaged flow fields near the tip at the near-stall conditions: no rolling-up of the leakage vortex downstream of the rotor, disappearance of the casing wall pressure trough corresponding to the leakage vortex, large spread of the low-energy fluid accumulating on the pressure side, and large pressure fluctuation on the pressure side. As the flow rate is decreased, the movement of the tip leakage vortex due to its breakdown becomes so large that the leakage vortex interacts with the suction surface as well as the pressure one. The interaction with the suction surface gives rise to the three-dimensional separation of the suction surface boundary layer.

Unsteady Three-Dimensional Flow Phenomena Due to Breakdown of Tip Leakage Vortex in a Transonic Axial Compressor Rotor

2004 ◽  
Author(s):  
K. Yamada ◽  
M. Furukawa ◽  
T. Nakano ◽  
M. Inoue ◽  
K. Funazaki
Keyword(s):  
Shock Wave ◽  
Flow Field ◽  
Vortex Breakdown ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Leading Edge ◽  
Tip Leakage Flow ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Compressor Rotor

Unsteady three-dimensional flow fields in a transonic axial compressor rotor (NASA Rotor 37) have been investigated by unsteady Reynolds-averaged Navier-Stokes simulations. The simulations show that the breakdown of the tip leakage vortex occurs in the compressor rotor because of the interaction of the vortex with the shock wave. At near-peak efficiency condition small bubble-type breakdown of the tip leakage vortex happens periodically and causes the loading of the adjacent blade to fluctuate periodically near the leading edge. Since the blade loading near the leading edge is closely linked to the swirl intensity of the tip leakage vortex, the periodic fluctuation of the blade loading leads to the periodic breakdown of the tip leakage vortex, resulting in self-sustained flow oscillation in the tip leakage flow field. However, the tip leakage vortex breakdown is so weak and small that it is not observed in the time-averaged flow field at near-peak efficiency condition. On the other hand, spiral-type breakdown of the tip leakage vortex is caused by the interaction between the vortex and the shock wave at near-stall operating condition. The vortex breakdown is found continuously since the swirl intensity of tip leakage vortex keeps strong at near-stall condition. The spiral-type vortex breakdown has the nature of self-sustained flow oscillation and gives rise to the large fluctuation of the tip leakage flow field, in terms of shock wave location, blockage near the rotor tip and three-dimensional separation structure on the suction surface. It is found that the breakdown of the tip leakage vortex leads to the unsteady flow phenomena near the rotor tip, accompanying large blockage effect in the transonic compressor rotor at the near-stall condition.

Three-Dimensional Turbulent Flow of the Tip Leakage Vortex in an Axial Compressor Rotor Passage

2000 ◽  
Author(s):  
Hongwei Ma ◽  
Haokang Jiang
Keyword(s):  
Turbulent Flow ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Radial Component ◽  
Reynolds Stresses ◽  
Compressor Cascade ◽  
Suction Surface ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Compressor Rotor

Three-dimensional turbulent flow of the tip leakage vortex in a single-stage axial compressor rotor passage is studied using a 3-Component Laser Doppler Velocimetry. The measurement results indicate that the tip leakage vortex originates at about 10% axial chord, 8% pitch away from the suction surface, and becomes strongest at about 30% chord. With the flow downstream, the vortex core moves toward the pressure surface and to a lower radial location, leading to substantial flow mixing, blockage and turbulence in the tip region. The radial component of turbulence intensities is found to be the highest while the axial-radial component of Reynolds stresses is the largest. Breakdown of the leakage vortex occurs inside the rear rotor passage, which makes the flow more turbulent in a wider region downstream. This viewpoint is confirmed by the measurements of unsteady static pressure on the casing wall. Breakdown of a leakage vortex is observed clearly in a compressor cascade with a small clearance. Unsteady interactions of the broken vorticities and the suction surface’s boundary layer are shown obviously inside the downstream passage.

On the Stability of Transonic Compressor With Wet Compression and Blade Tip Water Injection

2012 ◽  
Author(s):  
Mingcong Luo ◽  
Qun Zheng ◽  
Lanxin Sun ◽  
Qingfeng Deng ◽  
Jiyou Chen ◽  
...  
Keyword(s):  
Total Pressure ◽  
Rotor Blade ◽  
Water Injection ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Transonic Compressor ◽  
Compressor Rotor ◽  
Blade Tip ◽  
Compressor Performance ◽  
Wet Compression

The rotor blade tip leakage flow and associated formation of the tip leakage vortex and interaction of the tip leakage vortex with the shockwave, particularly in the case of a transonic compressor rotor have significant impact on the compressor performance and its stability. Air injection upstream of the compressor rotor tip has been shown to improve compressor performance and enhance its stability. The air required for rotor blade tip injection is generally taken from the later stages of the compressor thus causing penalty on the gas turbine performance. In this study, effects of water injection at the rotor tip with and without the wet compression on the compressor performance and its stability have been examined. To achieve the stated objectives, the well tested transonic compressor rotor stage, NASA rotor stage 37, has been numerically simulated. The evaluation of results on various performance parameters such as total pressure ratio, inlet flow capacity and adiabatic efficiency combined with contours of total pressure losses, entropy, Mach No., and temperature including limiting streamlines, shows that the blade tip water injection could help in reducing low energy region downstream of the shockwave and strength of the tip leakage vortex with the compressor operating at its rotating stall boundary condition. The extent of reduction depends on the droplet size, injection flow rate and its velocity. Furthermore, results show that combined case of the blade tip water injection and the wet compression could provide better stall margin enhancement than the blade tip water injection case.

Numerical Investigation of the Behavior of Tip Leakage Flow in a Low-Speed Axial Compressor Rotor at Near-Stall Condition

2012 ◽  
Author(s):  
Zhenzhen Duan ◽  
Yangwei Liu ◽  
Lipeng Lu
Keyword(s):  
Axial Compressor ◽  
Rotating Stall ◽  
Leakage Flow ◽  
Tip Leakage Flow ◽  
Tip Leakage Vortex ◽  
Stall Inception ◽  
Low Speed ◽  
Tip Leakage ◽  
Compressor Rotor ◽  
Corner Vortex

In the present work, time-accurate simulations were performed to investigate the unsteady flow fields in the tip region of a low-speed large-scale axial compressor rotor at near-stall condition. Firstly, the steady performance characteristic of the rotor was obtained by steady simulations. Secondly, a series of unsteady simulations were carried out to investigate the physical processes as the rotor approaching stall and the role of complex tip flow mechanism on flow instability in the rotor. The characteristics of tip leakage vortex were compared between design condition and near-stall condition. Detailed analyses were then employed to emphasize the development of stall inception and the comprehensions of the internal flow field. Two flow phenomena, spillage at the leading edge and backflow at the trailing edge, are found beyond the flow solution limit, which are both linked to the tip leakage flow. And the breakdown of the tip leakage vortex has been captured. The flow visualization and the quantification of passage blockage expose that the tip leakage vortex and corner vortex contribute most to the total passage blockage. Therefore, they are considered to be the key flow structures contributing to the rotating stall. Further analyses indicate that, in the current rotor, the interaction of the tip leakage flow and the corner vortex is clarified to be the key factor that leads to the rotating stall. In addition, the very initial disturbances of stall inception are discussed. And the interaction of the boundary layer migration on the blade suction side and the tip leakage vortex also plays a significant role in the stall inception.

J051024 Asymmetric Flow Behavior Due to Tip Leakage Vortex Breakdown at Near-Stall in an Axial Compressor Rotor

2012 ◽  
Vol 2012 (0) ◽  
pp. _J051024-1-_J051024-5
Author(s):  
Hiroaki KIKUTA ◽  
Yuuki ISHITOBI ◽  
Yasunori HARA ◽  
Masato FURUKAWA ◽  
Kazutoyo YAMADA ◽  
...  
Keyword(s):  
Vortex Breakdown ◽  
Flow Behavior ◽  
Axial Compressor ◽  
Asymmetric Flow ◽  
Tip Leakage Vortex ◽  
Tip Leakage ◽  
Compressor Rotor
Sign in / Sign up

Export Citation Format

Share Document