Transition and turbulence modeling of low pressure turbine flows

1998 ◽  
Author(s):  
P. Huang ◽  
G. Xiong
Keyword(s):  
Turbulence Modeling ◽  
Low Pressure ◽  
Low Pressure Turbine

Investigation of the Accuracy of RANS Models to Predict the Flow Through a Low-Pressure Turbine

2016 ◽  
Vol 138 (12) ◽  
Author(s):  
R. Pichler ◽  
R. D. Sandberg ◽  
V. Michelassi ◽  
R. Bhaskaran
Keyword(s):  
Linear Models ◽  
Turbulence Modeling ◽  
A Priori ◽  
Flow Characteristics ◽  
Turbulence Models ◽  
Low Pressure ◽  
Transport Equations ◽  
Compressible Turbulence ◽  
Low Pressure Turbine ◽  
Rans Models

In the present paper, direct numerical simulation (DNS) data of a low-pressure turbine (LPT) are investigated in light of turbulence modeling. Many compressible turbulence models use Favre-averaged transport equations of the conservative variables and turbulent kinetic energy (TKE) along with other modeling equations. First, a general discussion on the turbulence modeling error propagation prescribed by transport equations is presented, leading to the terms that are considered to be of interest for turbulence model improvement. In order to give turbulence modelers means of validating their models, the terms appearing in the Favre-averaged momentum equations are presented along pitchwise profiles at three axial positions. These three positions have been chosen such that they represent regions with different flow characteristics. General trends indicate that terms related with thermodynamic fluctuations and Favre fluctuations are small and can be neglected for most of the flow field. The largest errors arise close to the trailing edge (TE) region where vortex shedding occurs. Finally, linear models and the scope for their improvement are discussed in terms of a priori testing. Using locally optimized turbulence viscosities, the improvement potential of widely used models is shown. On the other hand, this study also highlights the danger of pure local optimization.

Cracks on the Roots of Turbine Blades of the Low-Pressure Turbine in a Steam Power Plant

2015 ◽  
Vol 52 (4) ◽  
pp. 214-225 ◽  
Author(s):  
E. Plesiutschnig ◽  
R. Vallant ◽  
G. Stöfan ◽  
C. Sommitsch ◽  
M. Mayr ◽  
...  
Keyword(s):  
Power Plant ◽  
Turbine Blades ◽  
Low Pressure ◽  
Steam Power ◽  
Steam Power Plant ◽  
Low Pressure Turbine

Low-pressure turbine disc fi rtree slots’ life and reliability enhancement by ultrasonic surface hardening

2020 ◽  
pp. 491-495
Author(s):  
A.M. Tomashevich ◽  
G.G. Shirvan’yants ◽  
D.A. Teryaev
Keyword(s):  
Residual Stress ◽  
Low Pressure ◽  
Fatigue Tests ◽  
Compression Stress ◽  
Cycle Basis ◽  
Low Pressure Turbine ◽  
Working Stress ◽  
Turbine Disc ◽  
Axial Residual Stress ◽  
Reliability Enhancement

The possibility of life and reliability enhancing of AL-31F low pressure turbine disc’s fir-tree slots by ultrasonic hardening is considered. Having disc’s material properties studied, working stress derivation is executed which was further used for following comparative fatigue tests. Also, Davidenkov method residual stress analysis is carried out which showed 95.3 % change to compression stress for circumferential residual stress and 80.9 % change to compression stress for axial residual stress which proves possibility of fir-tree slots’ life and reliability enhancement by ultrasonic hardening. Comparative fatigue tests with N = 4•10 5 cycles basis showed that the hardened samples standing out the cycle basis during higher oscillatory amplitudes (and, thus, affecting loads) than the non-hardened basic ones.

scholarly journals Prediction of Transient Pressure Fluctuations within a Low-Pressure Turbine Cascade Using a Lanczos-Filtered Harmonic Balance Method

2021 ◽  
Vol 6 (3) ◽  
pp. 25
Author(s):  
Jan Philipp Heners ◽  
Stephan Stotz ◽  
Annette Krosse ◽  
Detlef Korte ◽  
Maximilian Beck ◽  
...  
Keyword(s):  
Turbulence Model ◽  
Harmonic Balance ◽  
Separation Bubble ◽  
Pressure Fluctuations ◽  
Harmonic Balance Method ◽  
Low Pressure ◽  
Filter Method ◽  
Turbine Cascade ◽  
Transient Pressure ◽  
Low Pressure Turbine

Unsteady pressure fluctuations measured by fast-response pressure transducers mounted in a low-pressure turbine cascade are compared to unsteady simulation results. Three differing simulation approaches are considered, one time-integration method and two harmonic balance methods either resolving or averaging the time-dependent components within the turbulence model. The observations are used to evaluate the capability of the harmonic balance solver to predict the transient pressure fluctuations acting on the investigated stator surface. Wakes of an upstream rotor are generated by moving cylindrical bars at a prescribed rotational speed that refers to a frequency of f∼500 Hz. The excitation at the rear part of the suction side is essentially driven by the presence of a separation bubble and is therefore highly dependent on the unsteady behavior of turbulence. In order to increase the stability of the investigated harmonic balance solver, a developed Lanczos-type filter method is applied if the turbulence model is considered in an unsteady fashion.

Interaction of Wheelspace Coolant and Main Flow in a New Aeroderivative LPT

2006 ◽  
Author(s):  
Francesco Montomoli ◽  
Michela Massini ◽  
Nicola Maceli ◽  
Massimiliano Cirri ◽  
Luca Lombardi ◽  
...  
Keyword(s):  
Flux Distribution ◽  
Low Pressure ◽  
Main Flow ◽  
Space Region ◽  
Heat Flux Distribution ◽  
Gas Generator ◽  
Component Reliability ◽  
Accuracy Requirement ◽  
Low Pressure Turbine ◽  
Hot Gas

Increased computational capabilities make available for the aero/thermal designers new powerful tools to include more geometrical details, improving the accuracy of the simulations, and reducing design costs and time. In the present work, a low-pressure turbine was analyzed, modeling the rotor-stator including the wheel space region. Attention was focused on the interaction between the coolant and the main flow in order to obtain a more detailed understanding of the behavior of the angel wings, to evaluate the wall heat flux distribution, and to prevent hot gas ingestion. Issues of component reliability related to thermal stress require accurate modeling of the turbulence and unsteadiness of the flow field. To satisfy this accuracy requirement, a full 3D URANS simulation was carried out. A reduced count ratio technique was applied in order to decrease numerical simulation costs. The study was carried out to investigate a new two-stage Low Pressure Turbine from GE Infrastructure Oil&Gas to be coupled to a new aeroderivative gas generator, the LM2500+G4, developed by GE Infrastructure, Aviation.

Influence of Hot Streak Temperature Ratio on Low Pressure Stage of a Vaneless Counter-Rotating Turbine

2007 ◽  
Author(s):  
Qingjun Zhao ◽  
Fei Tang ◽  
Huishe Wang ◽  
Jianyi Du ◽  
Xiaolu Zhao ◽  
...  
Keyword(s):  
Shock Wave ◽  
High Pressure ◽  
Secondary Flow ◽  
Low Pressure ◽  
Turbine Rotor ◽  
Temperature Ratio ◽  
High Pressure Turbine ◽  
Pressure Stage ◽  
Low Pressure Turbine ◽  
Hot Streak

In order to explore the influence of hot streak temperature ratio on low pressure stage of a Vaneless Counter-Rotating Turbine, three-dimensional multiblade row unsteady Navier-Stokes simulations have been performed. The predicted results show that hot streaks are not mixed out by the time they reach the exit of the high pressure turbine rotor. The separation of colder and hotter fluids is observed at the inlet of the low pressure turbine rotor. After making interactions with the inner-extending shock wave and outer-extending shock wave in the high pressure turbine rotor, the hotter fluid migrates towards the pressure surface of the low pressure turbine rotor, and the most of colder fluid migrates to the suction surface of the low pressure turbine rotor. The migrating characteristics of the hot streaks are predominated by the secondary flow in the low pressure turbine rotor. The effect of buoyancy on the hotter fluid is very weak in the low pressure turbine rotor. The results also indicate that the secondary flow intensifies in the low pressure turbine rotor when the hot streak temperature ratio is increased. The effects of the hot streak temperature ratio on the relative Mach number and the relative flow angle at the inlet of the low pressure turbine rotor are very remarkable. The isentropic efficiency of the Vaneless Counter-Rotating Turbine decreases as the hot streak temperature ratio is increased.

Sign in / Sign up

Export Citation Format

Share Document