An investigation of surface films generated by laser irradiation of solid materials

1998 ◽  
Author(s):  
Lawrence Grimes ◽  
John Roberts ◽  
Ralph Rudder
Keyword(s):  
Laser Irradiation ◽  
Surface Films ◽  
Solid Materials

Modification of surface films on metallic substrates by excimer laser irradiation

1989 ◽  
Vol 174 ◽  
pp. 33-38 ◽  
Author(s):  
H.W. Bergmann ◽  
E. Schubert ◽  
K.J. Schmatjko ◽  
J. Dembowski
Keyword(s):  
Laser Irradiation ◽  
Excimer Laser ◽  
Surface Films ◽  
Metallic Substrates ◽  
Excimer Laser Irradiation

Surface Films on Zircaloy-2 Samples Cracked in Neutral Aqueous NaCl by Stress Corrosion

1973 ◽  
Vol 31 ◽  
pp. 46-47
Author(s):  
R.A. Ploc
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Film Thickness ◽  
Stress Corrosion ◽  
Zirconium Dioxide ◽  
Surface Film ◽  
Surface Films ◽  
Continuous Layer ◽  
Transmission Electron ◽  
Product Film

Samples of low-nickel Zircaloy-2 (material MLI-788-see(1)), when anodically polarized in neutral 5 wt% NaCl solutions, were found to be susceptible to pitting and stress corrosion cracking. The SEM revealed that pitting of stressed samples was occurring below a 2000Å thick surface film which behaved differently from normal zirconium dioxide in that it did not display interference colours. Since the initial film thickness was approximately 65Å, attempts were made to examine the product film by transmission electron microscopy to deduce composition and how the corrosion environment could penetrate the continuous layer.

Chronic Laser Exposure Effects on Rabbit Retina

1972 ◽  
Vol 30 ◽  
pp. 54-55
Author(s):  
Burton B. Silver ◽  
Theodore Lawwill
Keyword(s):  
Laser Irradiation ◽  
Laser Light ◽  
Broad Band ◽  
Argon Laser ◽  
Atropine Sulfate ◽  
Ultrastructural Changes ◽  
Laser Exposure ◽  
Rabbit Retina ◽  
Histological Changes ◽  
Threshold Doses

Dutch-belted 1 to 2.5 kg anesthetized rabbits were exposed to either xenon or argon laser light administered in a broad band, designed to cover large areas of the retina. For laser exposure, the pupil was dilated with atropine sulfate 1% and pheny lephrine 10%. All of the laser generated power was within a band centered at 5145.0 Anstroms. Established threshold for 4 hour exposures to laser irradiation are in the order of 25-35 microwatts/cm2. Animals examined for ultrastructural changes received 4 hour threshold doses. These animals exhibited ERG, opthalmascopic, and histological changes consistent with threshold damage.One month following exposure the rabbits were killed with pentobarbitol. The eyes were immediately enucleated and dissected while bathed in 3% phosphate buffered gluteraldehyde.

TEM studies of amorphization processes and amorphous structures

1988 ◽  
Vol 46 ◽  
pp. 448-449
Author(s):  
T. E. Mitchell ◽  
R. B. Schwarz
Keyword(s):  
Amorphous Materials ◽  
Fission Products ◽  
Rapid Quenching ◽  
Surface Films ◽  
List Type ◽  
Oxide Glasses ◽  
Crystalline Materials ◽  
Amorphous Structures ◽  
Amorphous Surface ◽  
Interfacial Films

Traditional oxide glasses occur naturally as obsidian and can be made easily by suitable cooling histories. In the past 30 years, a variety of techniques have been discovered which amorphize normally crystalline materials such as metals. These include [1-3]:Rapid quenching from the vapor phase.Rapid quenching from the liquid phase.Electrodeposition of certain alloys, e.g. Fe-P.Oxidation of crystals to produce amorphous surface oxide layers.Interdiffusion of two pure crystalline metals.Hydrogen-induced vitrification of an intermetal1ic.Mechanical alloying and ball-milling of intermetal lie compounds.Irradiation processes of all kinds using ions, electrons, neutrons, and fission products.We offer here some general comments on the use of TEM to study these materials and give some particular examples of such studies.Thin specimens can be prepared from bulk homogeneous materials in the usual way. Most often, however, amorphous materials are in the form of surface films or interfacial films with different chemistry from the substrates.

Corrections for surface films in microanalysis by EDS and EELS

1992 ◽  
Vol 50 (2) ◽  
pp. 1230-1231
Author(s):  
J. Bentley ◽  
E. A. Kenik
Keyword(s):  
Hydrocarbon Contamination ◽  
Specimen Preparation ◽  
Surface Films ◽  
Ion Milling ◽  
Preferential Sputtering ◽  
Electron Energy Loss Spectrometry ◽  
Composition Determination ◽  
Analytical Electron ◽  
First Order Correction ◽  
Electron Energy Loss

Common artifacts on analytical electron microscope (AEM) specimens prepared from bulk materials are surface films with altered structure and composition that result from electropolishing, oxidation, hydrocarbon contamination, or ion milling (preferential sputtering or deposition of sputtered specimen or support material). Of course, the best solution for surface films is to avoid them by improved specimen preparation and handling procedures or to remove them by low energy ion sputter cleaning, a capability that already exists on some specialized AEMs and one that is likely to become increasingly common. However, the problem remains and it is surprising that surface films have not received more attention with respect to composition determination by energy dispersive X-ray spectrometry (EDS) and electron energy loss spectrometry (EELS).For EDS, an effective first-order correction to remove the contribution of surface films on wedge shaped specimens is to subtract from the spectrum of interest a spectrum obtained under identical conditions (probe current, diffracting conditions, acquisition live time) from a thinner region of the specimen.

Microstructural changes of Aluminum Nitride after laser irradiation and electroless copper deposition

1994 ◽  
Vol 52 ◽  
pp. 636-637
Author(s):  
S. Cao ◽  
A. J. Pedraza ◽  
L. F. Allard
Keyword(s):  
Aluminum Nitride ◽  
Laser Irradiation ◽  
Electroless Deposition ◽  
Thermal Evaporation ◽  
Surface Region ◽  
Near Surface ◽  
Laser Patterning ◽  
Electroless Copper ◽  
Excimer Laser Irradiation ◽  
Laser Effect

Excimer-laser irradiation strongly modifies the near-surface region of aluminum nitride (AIN) substrates. The surface acquires a distinctive metallic appearance and the electrical resistivity of the near-surface region drastically decreases after laser irradiation. These results indicate that Al forms at the surface as a result of the decomposition of the Al (which has been confirmed by XPS). A computer model that incorporates two opposing phenomena, decomposition of the AIN that leaves a metallic Al film on the surface, and thermal evaporation of the Al, demonstrated that saturation of film thickness and, hence, of electrical resistance is reached when the rate of Al evaporation equals the rate of AIN decomposition. In an electroless copper bath, Cu is only deposited in laser-irradiated areas. This laser effect has been designated laser activation for electroless deposition. Laser activation eliminates the need of seeding for nucleating the initial layer of electroless Cu. Thus, AIN metallization can be achieved by laser patterning followed by electroless deposition.

Sampling and analysis of the air-water interface with SEM and EDS of microlayers

1989 ◽  
Vol 47 ◽  
pp. 1004-1005
Author(s):  
Randall W. Smith ◽  
John Dash
Keyword(s):  
Heavy Metals ◽  
Surface Microlayer ◽  
Surface Films ◽  
Water Interface ◽  
Physical Processes ◽  
Infrared Spectroscopic Analysis ◽  
Eds Analysis ◽  
Air Water Interface ◽  
Significant Area ◽  
Bulk Chemical

The structure of the air-water interface forms a boundary layer that involves biological ,chemical geological and physical processes in its formation. Freshwater and sea surface microlayers form at the air-water interface and include a diverse assemblage of organic matter, detritus, microorganisms, plankton and heavy metals. The sampling of microlayers and the examination of components is presently a significant area of study because of the input of anthropogenic materials and their accumulation at the air-water interface. The neustonic organisms present in this environment may be sensitive to the toxic components of these inputs. Hardy reports that over 20 different methods have been developed for sampling of microlayers, primarily for bulk chemical analysis. We report here the examination of microlayer films for the documentation of structure and composition.Baier and Gucinski reported the use of Langmuir-Blogett films obtained on germanium prisms for infrared spectroscopic analysis (IR-ATR) of components. The sampling of microlayers has been done by collecting fi1ms on glass plates and teflon drums, We found that microlayers could be collected on 11 mm glass cover slips by pulling a Langmuir-Blogett film from a surface microlayer. Comparative collections were made on methylcel1ulose filter pads. The films could be air-dried or preserved in Lugol's Iodine Several slicks or surface films were sampled in September, 1987 in Chesapeake Bay, Maryland and in August, 1988 in Sequim Bay, Washington, For glass coverslips the films were air-dried, mounted on SEM pegs, ringed with colloidal silver, and sputter coated with Au-Pd, The Langmuir-Blogett film technique maintained the structure of the microlayer intact for examination, SEM observation and EDS analysis were then used to determine organisms and relative concentrations of heavy metals, using a Link AN 10000 EDS system with an ISI SS40 SEM unit. Typical heavy microlayer films are shown in Figure 3.

Studies on the mechanism of printing film-coated tablets containing titanium dioxide in the film by using UV laser irradiation

2009 ◽  
Vol 00 (00) ◽  
pp. 090915102728058-8
Author(s):  
Yoshiteru Kato ◽  
Yasuhiko Nakashima ◽  
Naoki Shino ◽  
Koichi Sasaki ◽  
Akihiro Hosokawa ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Laser Irradiation ◽  
Uv Laser
Sign in / Sign up

Export Citation Format

Share Document