Cellular structure of lean hydrogen flames in microgravity

1990 ◽  
Author(s):  
G. PATNAIK ◽  
K. KAILASANATH
Keyword(s):  
Cellular Structure

Metallographic analysis of M2 high speed steel granules

2019 ◽  
pp. 78-85
Author(s):  
L. E. Afanasieva
Keyword(s):  
Solid Solution ◽  
Cellular Structure ◽  
High Speed ◽  
Solution Structure ◽  
Supersaturated Solid Solution ◽  
High Speed Steel ◽  
Metallographic Analysis ◽  
M2 High Speed Steel ◽  
Melt Composition

The article is devoted to the metallographic analysis of the M2 high-speed steel granules. The study is based on the investigation of the microstructure of the M2 high-speed steel granules obtained by melt atomization. It is demonstrated that granules of similar size can harden both by chemically separating and chemically non-separating mechanism. These last ones have supersaturated solid solution structure of the liquid melt composition, a dispersed dendritic-cellular structure and an increased microhardness HV = 10267±201 MPa.

scholarly journals The Influence of Pipe Bending Curvature on H2-O2 Gaseous Detonation Wave Front

2021 ◽  
Vol 11 (9) ◽  
pp. 3951
Author(s):  
Hui Zhao ◽  
Huiyuan Li ◽  
Haitao Zhao ◽  
Leisheng Li ◽  
Jian Li
Keyword(s):  
Detonation Wave ◽  
Pressure Distribution ◽  
Wave Front ◽  
Cell Size ◽  
Chemical Reaction ◽  
Cellular Structure ◽  
Gaseous Detonation ◽  
External Boundary ◽  
Propagation Characteristics ◽  
Detonation Wave Front

The influence of different bend curvatures on the detonation wave propagation was analyzed by an advanced numerical simulation system. The mechanism of propagation properties is revealed by cellular structure, internal and external boundary pressure distribution, propagation process of detonation wave and chemical reaction. The cellular structure and detonation wave front of bend with different curvature are very different. The simulation results show that the detonation wave with regular cell structure propagating through the curved parts induces detonation cell size increased by diffraction near the inner wall while detonation reflected on the bottom surface resulting in decrease of cell size. Detonation wave was affected by the rarefaction wave and compression wave in the bent pipe. The pressure distribution of the bend shows that the peak pressure in the 450 curvature is the largest, which should be paid more attention in industrial design. The chemical reaction could indicate the propagation characteristics of detonation wave, and different propagation characteristics have different profiles of chemical components.

CELLULAR STRUCTURE AND BIOLOGY OF DUPUYTREN’S DISEASE

Hand Clinics ◽  
1999 ◽  
Vol 15 (1) ◽  
pp. 21-34
Author(s):  
James J. Tomasek ◽  
Melville B. Vaughan ◽  
Carol J. Haaksma
Keyword(s):  
Cellular Structure ◽  
Dupuytren’S Disease ◽  
Dupuytren's Disease

scholarly journals The influence of the equation of state on the cellular structure of gaseous detonations

2021 ◽  
Vol 33 (3) ◽  
pp. 036105
Author(s):  
S. Taileb ◽  
J. Melguizo-Gavilanes ◽  
A. Chinnayya
Keyword(s):  
Equation Of State ◽  
Cellular Structure ◽  
Gaseous Detonations

scholarly journals Viscoelastic Properties of Cell Structures Manufactured Using a Photo-Curable Additive Technology—PJM

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1895
Author(s):  
Tomasz Kozior ◽  
Czesław Kundera
Keyword(s):  
Viscoelastic Properties ◽  
Cellular Structure ◽  
Material Selection ◽  
Cellular Structures ◽  
Test Results ◽  
Additive Technology ◽  
Polymer Resin ◽  
Cell Structures ◽  
Relaxation Curves ◽  
The Impact

This research paper reviews the test results involving viscoelastic properties of cellular structure models made with the PolyJet Matrix—PJM additive technology. The designed test specimens were of complex cellular structure and made of three various photo-curable polymer resin types. Materials were selected taking into account the so-called “soft” and “tough” material groups. Compressive stress relaxation tests were conducted in accordance with the recommendations of standard ISO 3384, and the impact of the geometric structure shape and material selection on viscoelastic properties, as well as the most favorable geometric variants of the tested cellular structure models were determined. Mathematica and Origin software was used to conduct a statistical analysis of the test results and determine five-parameter functions approximating relaxation curves. The most favorable rheological was adopted and its mean parameters determined, which enables to match both printed model materials and their geometry in the future, to make a component with a specific rheological response. Furthermore, the test results indicated that there was a possibility of modelling cellular structures within the PJM technology, using support material as well.

Effect of Bone Tumor and Osteoporosis on Mechanical Properties of Bone and Bone Tissue Properties: A Finite Element Study

2007 ◽  
Author(s):  
Vipul P. Gohil ◽  
Paul K. Canavan ◽  
Hamid Nayeb-Hashemi
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Bone Density ◽  
Bone Tissue ◽  
Bone Tumor ◽  
Cellular Structure ◽  
Bone Tumors ◽  
World Health ◽  
Tissue Stiffness ◽  
Tissue Properties

This research is aimed to study the variations in the biomechanical behavior of bone and bone tissues with osteoporosis and bone tumors. Osteoporosis and bone tumors reduce the mechanical strength of bone, which creates a greater risk of fracture. In the United States alone, ten million individuals, eight million of whom are women, are estimated to already have osteoporosis, and almost 34 million more are estimated to have low bone mass (osteopenia) placing them at increased risk for osteoporosis. World Health Organization defines osteopenia, as a bone density between one and two and a half standard deviations (SD) below the bone density of a normal young adult. (Osteoporosis is defined as 2.5 SD or more below that reference point.). Together, osteoporosis and osteopenia are expected to affect an estimated 52 million women and men age 50 and older by 2010, and 61 million by 2020. The current medical cost of osteoporosis total is nearly about $18 billion in the U.S. each year. There is a dearth of literature that addresses the effects of osteoporosis on bone tissue properties. Furthermore, there are few studies published related to the effect of bone tumors such as Adamantinoma of long bones, Aneurysmal bone cyst, Hemangioma and others on overall behavior of bone. To understand the variations in bio-mechanical properties of internal tissues of bone with osteoporosis and bone tumor, a 2D finite element (FE) model of bone is developed using ANSYS 9.0 ® (ANSYS Inc., Canonsburg, PA). Trabecular bone is modeled using hexagonal and voronoi cellular structure. This finite element model is subjected to change in BVF (bone volume fraction) and bone architecture caused by osteoporosis. The bone tumor is modeled as finer multi-cellular structure and the effects of its size, location, and property variation of tumor on overall bone behavior are studied. Results from this analysis and comparative data are used to determine behavior of bone and its tissue over different stage of osteoporosis and bone tumor. Results indicate that both bone tumor and osteoporosis significantly change the mechanical properties of the bone. The results show that osteoporosis increases the bone tissue stiffness significantly as BVF reduces. Bone tissue stiffness is found to increase by 80 percent with nearly 55 percent reduction of BVF. The results and methods developed in this research can be implemented to monitor variation in bio-mechanical properties of bone up to tissue level during medication or to determine type and time for need of external support such as bracing.

Sign in / Sign up

Export Citation Format

Share Document