Structure of the wall pressure fluctuations in a shock-induced separated turbulent flow

1985 ◽  
Author(s):  
K. MUCK ◽  
S. BOGDONOFF ◽  
J.-P. DUSSAUGE
Keyword(s):  
Turbulent Flow ◽  
Pressure Fluctuations ◽  
Wall Pressure ◽  
Wall Pressure Fluctuations

Wall Pressure Fluctuations in the Reattachment Region of a Backward Facing Step

2007 ◽  
Author(s):  
Yu-Tai Lee ◽  
Theodore M. Farabee ◽  
William K. Blake
Keyword(s):  
Kinetic Energy ◽  
Turbulent Flow ◽  
Turbulent Kinetic Energy ◽  
Source Term ◽  
Pressure Fluctuations ◽  
Wall Pressure ◽  
Mean Flow ◽  
Backward Facing Step ◽  
Fluctuating Pressure ◽  
Wall Pressure Fluctuations

Steady mean flow fields and turbulent flow characteristics obtained from solving the Reynolds Averaged Navier Stokes (RANS) equations with a k-ε isotropic turbulence model are used to predict the frequency spectrum of wall-pressure fluctuations for flow past a backward facing step. The linear source term (LST) of the governing fluctuating-pressure equation is used in deriving the final double integration formula for the fluctuating wall pressure. The integrand of the solution formula includes the mean-flow velocity gradient, modeled turbulence normal fluctuation, Green’s function and the spectral model for the interplane correlation. An anisotropic distribution of the turbulent kinetic energy is implemented using a function named anisotropic factor. This function represents a ratio of the turbulent normal Reynolds stress to the turbulent kinetic energy and is developed based on an equilibrium turbulent flow or flows with zero streamwise pressure gradient. The spectral correlation model for predicting the wall-pressure fluctuations is obtained through modeling of the streamwise and spanwise wavenumber spectra. The nonlinear source term (NST) in the original fluctuating-pressure equation is considered following the conclusion of Kim’s direct numerical simulation (DNS) study of channel flow. Predictions of frequency spectra for the reattachment flow past a backward facing step (BFS) are investigated to verify the validity of the current modeling. Detailed turbulence features and wall-pressure spectra for the flow in the reattachment region of the BFS are predicted and discussed. DNS and experimental data for BFSs are used to develop and validate these calculations. The prediction results based on different modeling characteristics and flow physics agree with the observed turbulence field.

Noise Filtering for Wall-Pressure Fluctuations in Measurements Around a Cylinder With Laminar and Turbulent Flow Separation

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
C. Sardu ◽  
D. Lasagna ◽  
G. Iuso
Keyword(s):  
Turbulent Flow ◽  
Flow Separation ◽  
Adaptive Filters ◽  
Fluid Dynamic ◽  
Pressure Fluctuations ◽  
Free Field ◽  
Noise Cancellation ◽  
Wall Pressure ◽  
Wall Pressure Fluctuations ◽  
Laminar And Turbulent Flow

This paper proposes two different noise cancellation techniques for cleaning wall-pressure fluctuations signals. These fluctuations are measured around a circular cylinder with laminar and turbulent flow separation. The noise cancellation techniques are based on Wiener and adaptive filters and use the signals of pressure transducers mounted in a cross section of the cylinder and the signal of a free-field sensor opportunely located upstream. First, synthetic signals are used in order to validate the procedure. Then, both techniques are applied to the experimental data. Specific attention is paid to the filter order, optimized by a method introduced in this paper. Both filter types showed a selective behavior preserving the essence of the fluid dynamic phenomena characterizing the flow fields at each Reynolds number tested, especially when laminar separation occurs.

Sign in / Sign up

Export Citation Format

Share Document