Experimental investigation of a simulated compressor airfoil trailing-edge flowfield

AIAA Journal ◽  
1985 ◽  
Vol 23 (5) ◽  
pp. 768-775 ◽  
Author(s):  
Robert W. Paterson ◽  
Harris D. Weingold
Keyword(s):  
Experimental Investigation ◽  
Trailing Edge

Effect of Trailing-Edge Flap Deflection on a Symmetric Airfoil Over a Wavy Ground

2018 ◽  
Vol 141 (6) ◽  
Author(s):  
V. Tremblay-Dionne ◽  
T. Lee
Keyword(s):  
Experimental Investigation ◽  
Pitching Moment ◽  
Cyclic Variation ◽  
Trailing Edge ◽  
Opposite Trend ◽  
Aerodynamic Properties ◽  
Trailing Edge Flap ◽  
Flap Deflection ◽  
Naca 0015

The effect of trailing-edge flap (TEF) deflection on the aerodynamic properties and flowfield of a symmetric airfoil over a wavy ground was investigated experimentally. This Technical Brief is a continuation of Lee and Tremblay-Dionne (2018, “Experimental Investigation of the Aerodynamics and Flowfield of a NACA 0015 Airfoil Over a Wavy Ground,” ASME J. Fluids Eng., 140(7), p. 071202) in which an unflapped airfoil was employed. Regardless of the flap deflection, the cyclic variation in the sectional lift Cl and pitching moment Cm coefficients over the wavy ground always persists. The Cm also has an opposite trend to Cl. The flap deflection, however, produces an increased maximum and minimum Cl and Cm with a reduced fluctuation compared to their unflapped counterparts. The Cd increase outperforms the Cl increase, leading to a lowered Cl/Cd of the flapped airfoil.

scholarly journals An experimental investigation of trailing-edge noise reduction due to elasticity

2018 ◽  
Author(s):  
Maurício M. Nilton ◽  
Yasir A. Malik ◽  
André V. Cavalieri ◽  
Leandro D. de Santana ◽  
Mauricio V. Donadon ◽  
...  
Keyword(s):  
Experimental Investigation ◽  
Noise Reduction ◽  
Trailing Edge ◽  
Trailing Edge Noise

Experimental investigation of aerofoil tonal noise at low Mach number

2021 ◽  
Vol 932 ◽  
Author(s):  
Prateek Jaiswal ◽  
Yann Pasco ◽  
Gyuzel Yakhina ◽  
Stéphane Moreau
Keyword(s):  
Experimental Investigation ◽  
Mach Number ◽  
Three Dimensional ◽  
Normal Modes ◽  
Wall Pressure ◽  
Far Field ◽  
Tonal Noise ◽  
Trailing Edge ◽  
Modal Shape ◽  
Low Mach Number

This paper presents an experimental investigation of aerofoil tones emitted by a controlled-diffusion aerofoil at low Mach number ( $0.05$ ), moderate Reynolds number based on the chord length ( $1.4 \times 10^{5}$ ) and moderate incidence ( $5^{\circ }$ angle of attack). Wall-pressure measurements have been performed along the suction side of the aerofoil to reveal the acoustic source mechanisms. In particular, a feedback loop is found to extend from the aerofoil trailing edge to the regions near the leading edge where the flow encounters a mean favourable pressure gradient, and consists of acoustic disturbances travelling upstream. Simultaneous wall-pressure, velocity and far-field acoustic measurements have been performed to identify the boundary-layer instability responsible for tonal noise generation. Causality correlation between far-field acoustic pressure and wall-normal velocity fluctuations has been performed, which reveals the presence of a Kelvin–Helmholtz-type modal shape within the velocity disturbance field. Tomographic particle image velocimetry measurements have been performed to understand the three-dimensional aspects of this flow instability. These measurements confirm the presence of large two-dimensional rollers that undergo three-dimensional breakdown just upstream of the trailing edge. Finally, modal decomposition of the flow has been carried out using proper orthogonal decomposition, which demonstrates that the normal modes are responsible for aerofoil tonal noise. The higher normal modes are found to undergo regular modulations in the spanwise direction. Based on the observed modal shape, an explanation of aerofoil tonal noise amplitude reduction is given, which has been previously reported in modular or serrated trailing-edge aerofoils.

Two-Dimensional Experimental Investigation on the Effects of a Fowler Flap Gap and Overlap Size on the Wake Flow Field

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
David Demel ◽  
Mohsen Ferchichi ◽  
William D. E. Allan ◽  
Marouen Dghim
Keyword(s):  
Experimental Investigation ◽  
Flow Field ◽  
Angle Of Attack ◽  
Wake Flow ◽  
Two Dimensional ◽  
Edge Region ◽  
Suction Surface ◽  
Trailing Edge ◽  
Piv Measurements ◽  
Image Velocimetry

This work details an experimental investigation on the effects of the variation of flap gap and overlap sizes on the flow field in the wake of a wing-section equipped with a trailing edge Fowler flap. The airfoil was based on the NACA 0014-1.10 40/1.051 profile, and the flap was deployed with 40 deg deflection angle. Two-dimensional (2D) particle image velocimetry (PIV) measurements of the flow field in the vicinity of the main wing trailing edge and the flap region were performed for the optimal flap gap and overlap, as well as for flap gap and overlap increases of 2% and 4% chord beyond optimal, at angles of attack of 0 deg, 10 deg, and 12 deg. For all the configurations investigated, the flow over the flap was found to be fully stalled. At zero angle of attack, increasing the flap gap size was found to have minor effects on the flow field but increased flap overlap resulted in misalignment between the main wing boundary layer (BL) flow and the slot flow that forced the flow in the trailing edge region of the main wing to separate. When the angle of attack was increased to near stall conditions (at angle of attack of 12 deg), increasing the flap gap was found to energize and improve the flow in the trailing edge region of the main wing, whereas increased flap overlap further promoted flow separation on the main wing suction surface possibly steering the wing into stall.

Experimental Investigation of the Effect of Camber on the Aerodynamic Characteristics of Airfoils in Ground Effect

2003 ◽  
Author(s):  
M. R. Ahmed ◽  
G. M. Imran ◽  
S. D. Sharma
Keyword(s):  
Experimental Investigation ◽  
Angle Of Attack ◽  
Ground Effect ◽  
Chord Length ◽  
Wake Region ◽  
Trailing Edge ◽  
Mean Velocity ◽  
Large Defect ◽  
Freestream Velocity ◽  
Ground Clearance

In the present paper, results from an experimental investigation of aerodynamic ground effect on two airfoils are presented. The flow characteristics over a symmetrical airfoil (NACA 0015) and a cambered airfoil (NACA 4415) were studied in a low speed wind tunnel. Experiments were carried out by varying the angle of attack from 0° to 10° and ground clearance from zero to one chord length. Pressure distribution on the surface of the airfoil was obtained with the help of pressure tappings. Mean velocity distributions were obtained over the surface of the airfoil. Profiles of mean velocity and turbulence intensity were obtained in the wake region at 0.5 and 1.0 chord length downstream of the trailing edge. It is found that pressure increases on the lower surface as the ground is approached. The flow accelerates over the airfoil, and a considerably higher mean velocity is observed near the suction peak location. For the symmetrical airfoil, the mean velocity over the surface was found to increase by nearly 30%, while for the cambered airfoil, an increase of nearly 60% was recorded for an angle of attack of 7.5°. The flow was found to separate almost near the trailing edge for angles of attack upto 10°, resulting in a thinner wake region and lower turbulence intensities for the symmetrical airfoil; while for the cambered airfoil, an early separation for an angle of attack of 10° was observed. Measurements in the wake region showed a defect in mean velocity profile at the corresponding values of ground clearance. For lower angles of attack, turbulence levels were higher in the wake region for the symmetrical airfoil, while for an angle of attack of 10°, very large defect in velocity was observed for the cambered airfoil model and the minimum velocity reduced to 20% of the freestream velocity.

Sign in / Sign up

Export Citation Format

Share Document